Memphis Shades Windshield Bracket Mount Kit for Yamaha Road Star models. This mounting hardware is required to install a Memphis Shades windshield securely onto your bike.
The brackets are in good used condition with normal wear. Photos show the exact items you will receive. Perfect replacement if your original hardware is missing or damaged, or if you’re adding a Memphis Shades windshield to your Road Star.
Product Features:
Brand: Memphis Shades
Windshield mounting bracket kit
Fits Yamaha Road Star (select years/models – verify fitment)
Durable steel construction with chrome finish
Condition: used, see photos
Compatibility (verify exact fitment before purchase):
Yamaha Road Star 1600 (1999–2003)
Yamaha Road Star 1700 (2004–2014)
Mid-USA Pillion Pad (Part #27398) measuring 9” x 8” x 2”, designed with a 5-suction cup mounting system for easy installation. This universal passenger seat pad is perfect for Harley-Davidson, choppers, and custom bobbers, offering a quick way to add a passenger seat without drilling or permanent modifications.
📌 Condition Note:
Brand new, never used
Black vinyl seat with durable covering
Dimensions: 9” x 8” x 2”
Mounts securely with 5 suction cups
Part Number: 27398
Perfect for riders seeking a removable passenger seat solution that’s both functional and stylish.
Product Features:
Brand: Mid-USA
Part Number: 27398
Pillion pad seat (9” x 8” x 2”)
5-suction cup installation
Universal fit, no drilling required
Condition: new
Compatibility (verify before purchase):
Fits Harley-Davidson models with smooth rear fenders
Works with many chopper, bobber, and custom motorcycles
Universal fit — confirm dimensions with your setup
Mid-USA Bearing, Bushing & Seal Kit (Part #78501) designed for Harley-Davidson Big Twin primary drive assemblies. This complete kit provides everything needed to refresh worn bearings, bushings, and seals to restore smooth and reliable operation.
📌 Condition Note:
New aftermarket kit by Mid-USA
Complete set — bearings, bushings, and seals
High-quality components built to OEM spec
See photos for included parts
Perfect replacement kit for Harley-Davidson Big Twin owners needing a cost-effective solution to service or rebuild their primary drive system.
Product Features:
Brand: Mid-USA
Part Number: 78501
Bearing, bushing & seal kit
Designed for Harley-Davidson Big Twin primary
Condition: new, aftermarket
Compatibility (verify with Mid-USA catalog before purchase):
Harley-Davidson Big Twin models with compatible primary drives
Check Mid-USA or Harley service manual for specific years/models
Mid-USA Primary Bearing, Bushing & Seal Kit (Part #7-85-02) for Harley-Davidson Big Twin 5-Speed models (1994–2006). This kit includes everything needed to refresh the inner primary — bearings, bushings, seals, clips, and hardware — ensuring smooth operation and long-lasting durability.
📌 Condition Note:
Brand: Mid-USA
New aftermarket replacement kit
Includes sealed mainshaft bearing, bushing, seals, and clips
Built to OEM-style specifications
Perfect for Harley owners servicing their primary drive and looking for a complete, cost-effective kit with reliable components.
Product Features:
Brand: Mid-USA
Part Number: 7-85-02
Primary bearing, bushing & seal kit
Includes sealed mainshaft bearing, seals, bushing, and clips
Condition: new aftermarket replacement
Compatibility (verify with Harley manual before purchase):
Harley-Davidson Big Twin models (1994–2006) with 5-speed transmissions
Touring, Softail, and Dyna models in those years (check fitment per service manual)
Mid USA Old School Throttle Control with Grips (Part #42077). This vintage-style throttle assembly includes grips and is designed for custom choppers, bobbers, and Harley-Davidson motorcycles looking for that classic old-school setup.
📌 Condition Note:
Used, with normal wear from age and use
Chrome and grips show light wear (see photos)
Structurally sound and fully functional
Perfect for custom builds, restorations, or replacing a worn throttle control on your old-school Harley or chopper project.
Product Features:
Brand: Mid USA
Part Number: 42077
Old school throttle control assembly with grips
Classic custom chopper/bobber style
Condition: used, see photos
Compatibility (general/custom use — may require modification):
Harley-Davidson choppers and bobbers
Custom motorcycle builds using old school throttle setups
Universal fit for 1” handlebars (verify before purchase)
Mid-USA Rebuild/Repair Tune-Up Kit (Part #82202) for Harley-Davidson Zenith and Bendix carburetors. Designed for 36mm, 38mm, and 40mm carbs, this kit includes the essential gaskets, seals, and components to restore proper carburetor performance.
📌 Condition Note:
Brand new, never installed
Aftermarket kit by Mid-USA
Fits Zenith & Bendix 36mm, 38mm, 40mm carburetors
See photos for included parts
Perfect for Harley riders maintaining or rebuilding their stock Zenith or Bendix carburetor, ensuring smooth idle, throttle response, and fuel delivery.
Product Features:
Brand: Mid-USA
Part Number: 82202
Complete rebuild/repair tune-up kit
Fits Harley Bendix & Zenith carburetors (36mm, 38mm, 40mm)
Condition: new
Compatibility (verify with Harley manual before purchase):
Harley-Davidson models equipped with Zenith/Bendix 36mm, 38mm, or 40mm carburetors
Common on Shovelhead, Ironhead Sportster, and vintage Big Twin models
Confirm fitment before purchase
Mid-USA Stay-Put Race Inner Primary Mainshaft Bearing (Part #34091-85). Designed as a reliable replacement for Harley-Davidson applications, this bearing provides long-lasting performance and secure fitment for the inner primary mainshaft.
📌 Condition Note:
Brand: Mid-USA Motorcycle Parts
New aftermarket replacement part
OEM-style fit for Harley applications
Built for durability and smooth operation
Perfect for Harley riders and builders servicing or rebuilding primary drive assemblies.
Product Features:
Brand: Mid-USA Motorcycle Parts
Part Number: 34091-85
Inner primary mainshaft bearing stay-put race
Condition: new aftermarket OEM-style replacement
Compatibility (verify with Harley manual before purchase):
Fits Harley-Davidson Big Twin models requiring PN 34091-85
Commonly used on 1985–up models with corresponding primary drive assemblies
Confirm exact fitment with Harley service manual
The Mid-USA 11766 Clear Turn Signal Lens is a direct replacement lens for custom and stock-style Harley turn signals. Made from durable clear plastic, this lens enhances visibility while offering a clean, modern look for your lighting setup. Compatible with a range of Harley-Davidson models using bullet-style or flat-style signals depending on housing size.
Product Features:
Clear turn signal lens
Mid-USA part number 11766
Durable plastic construction
Fits select Harley-Davidson custom applications
Easy installation with existing signal housings
Compatible With:
Custom Harley-Davidson applications using standard aftermarket signal housings
Fits Mid-USA signal kits and Harley-style bullet signals
(Confirm diameter for exact fitment — commonly used in custom builds or stock signal replacements.)
Upgrade your Harley’s engine with the Mid-USA 67093 Chrome Oil Pump Top Plate Cover, specifically designed for FLT models from 1993 to 1998. This chrome-plated die-cast cover is a direct replacement for Harley OEM part number 60690-93A, offering a clean, polished appearance for your oil pump area. Durable and easy to install, this cover is perfect for restoring or customizing your Touring model’s engine finish.
🔧 Fitment Compatibility (Year/Make/Model)
Fits Harley-Davidson FLT Touring Models (Big Twin):
Electra Glide (FLHT) – 1993–1998
Electra Glide Classic (FLHTC) – 1993–1998
Electra Glide Ultra Classic (FLHTCU) – 1993–1998
Tour Glide (FLTC/FLTCU) – 1993–1996
Road King (FLHR) – 1994–1998
Replaces OEM Part Number: 60690-93A
Genuine Mikuni VM28/486-20 pilot jets, size #20, in a convenient 4-pack. These bleed-type pilot jets are designed for Mikuni RS and HS series carburetors, providing precise low-speed fuel metering for smooth idle and throttle response. Ideal for tuning and maintenance of motorcycles and ATVs using RS & HS Mikuni carbs.
Details:
Brand: Mikuni
Part Number: VM28/486-20
Size: #20
Type: Pilot Jet (Bleed Type)
Quantity: 4 pieces per pack
Compatible With: Mikuni RS & HS Carburetors
Condition: New
Genuine Mikuni VM28/486-40 pilot jet designed for use with Mikuni HSR, RS, and TM33 carburetors. This jet ensures precise low-speed fuel delivery for smooth idle and throttle response. Ideal for tuning or replacing worn jets in your carb setup.
Details:
Mikuni OEM part #: VM28/486-40
Size: 40
Fits Mikuni HSR, RS, and TM33 carburetors
Precision-machined brass for consistent fuel metering
Direct OEM replacement
Condition:
New, unused jet — ready for installation.
Fitment (verify before purchase):
Mikuni HSR series
Mikuni RS series
Mikuni TM33
(Always confirm your carb model and size before ordering.)
This listing is for a pair of used condensers marked Mitsubishi, similar in style and fit to Lucas part number 54441582. These are correct for 1968 and later BSA Singles and Triumph T140 ignition systems.
Product Type: Ignition Condenser Pair
Quantity: 2 condensers included
Condition: Used — one unit is in good usable condition, the other shows light damage. Sold as-is.
Note: These are Mitsubishi-marked condensers, not Lucas-stamped. They may have been OEM-supplied replacements used during production or later service.
Compatibility:
BSA Singles (1968+)
Triumph T140 (1968+)
The Moose Racing 0407‑0099 Fork & Dust Seal Kit offers premium triple‑lip MAX‑LIFE seals designed for a 47 mm fork inner diameter, 58.3 mm outer diameter, and 10 mm thickness. Tested to last 3–4× longer than OEM, these seals reduce drag and improve durability under demanding off‑road and street conditions.
Product Type: Fork & Dust Seal Kit
Seal Dimensions: 47 mm ID × 58.3 mm OD × 10 mm Thickness
Compatible Makes & Models:
✔ Honda
• CR250R (1997–2007)
• CRF250R (2004–2009)
• CRF250X (2005–2017)
• CRF450R (2002–2008)
• CRF450X (2005–2017)
✔ Suzuki
• RM125 (2001–2008)
• RM250 (2004–2008)
• RM‑Z250 (2007–2012)
• RMX450Z (2017)
✔ Kawasaki
• KX250F (2006–2012)
✔ Husqvarna
• CR250 (1997–1998)
✔ Triumph
• Thunderbird (2010–2012)
Additional compatibility with DR‑Z400SM, RM‑Z450, RMX450Z, and CRF450X.
Enhance the durability and performance of your motorcycle's chain system with the Moose Racing Chain Roller (Part Number: M795-10). Designed to replace stock rollers, this 38mm black roller offers superior strength and longevity at an affordable price. It features precision contact sealed bearings and comes complete with all necessary mounting hardware (excluding Delrin)
🔑 Key Features:
Enhanced Durability: Constructed to be stronger and more durable than stock rollers, ensuring a longer lifespan.
Sealed Bearings: Equipped with precision contact sealed bearings to reduce maintenance and improve performance.
Complete Hardware: Includes all necessary mounting hardware (Delrin not included) for straightforward installation.
Color Options: Available in black, blue, red, and clear (color availability may vary by application).
🛠️ Specifications:
Dimensions: 38mm (Diameter) x 28mm (Width)
Color: Black.
Part Number: M795-10.
Maintain the integrity of your Can-Am Outlander 650 XMR's front differential with the Moose Racing Front Differential Seal Kit. Designed specifically for 2015–2018 Can-Am Outlander 650 XMR models, this comprehensive kit includes high-speed EMQ quality bearings and type TC rubber seals. The garter-spring inner lips and rubber-covered outside diameter seals ensure optimal sealing, effectively preventing leaks and protecting internal components from contaminants. Ideal for riders seeking to restore or maintain their ATV's front differential performance.
✅ Compatibility List
Can-Am Outlander 650 XMR (2015)
Can-Am Outlander 650 XMR (2016)
Can-Am Outlander 650 XMR (2017)
Can-Am Outlander 650 XMR (2018)
Ensure the longevity and smooth operation of your Honda ATV with the Moose Racing Front Wheel Bearing Kit (Part #0215-0959). This kit is specifically designed for various Honda TRX420 and TRX500 models, providing high-quality bearings to maintain optimal performance.
Key Features:
Model Compatibility: Designed for Honda TRX420FA, TRX420FE, TRX420FM, TRX420TE, TRX420TM, and TRX500 models.
Complete Kit: Contains enough bearings for two wheels, ensuring comprehensive maintenance.
High-Quality Construction: Manufactured to meet or exceed OEM standards for durability and performance.
Easy Installation: Designed for straightforward installation; please verify your year, make, and model before purchasing.
Installation Notes:
Ensure all components are properly lubricated during installation to prevent premature wear.
It's recommended to replace bearings on both sides for balanced performance.
Package Includes:
Front wheel bearings suitable for the specified Honda ATV models.
Restore your Arctic Cat ATV's suspension performance with the Moose Racing Front/Rear Shock Bearing Kit 1313-0027. This comprehensive kit includes all necessary components—bearings, seals, spacers, and pins—to rebuild your shock bearings to factory specifications. Constructed from OEM-quality materials, it ensures durability and a precise fit, enhancing your vehicle's handling and ride comfort.
✅ Compatibility List (Bulleted Format):
Arctic Cat 500
Arctic Cat 650
Arctic Cat 700
Enhance the braking performance of your 2015–2024 Honda TRX500FA Rubicon with the Moose Racing M9167 Sintered Rear Brake Shoes. Crafted from durable sintered metal, these brake shoes are designed to withstand the toughest conditions, providing consistent and reliable stopping power in both wet and dry environments. Their high heat resistance ensures optimal performance during intense braking situations, making them an ideal choice for both recreational riders and professionals seeking superior braking efficiency.
✅ Compatibility List
The Moose Racing M9167 Rear Brake Shoes are compatible with the following Honda models:
Honda TRX500FA Rubicon (2015–2024)
Honda TRX500FA6 Foreman Rubicon 4x4 EPS (2015–2024)
Add a touch of classic chrome styling to your Honda VT1100 Shadow or Spirit with the National Cycle Rear Fender Tip (N732). Crafted from durable cast zinc alloy and finished with a high-polish chrome, this fender tip not only enhances the aesthetic appeal of your motorcycle but also provides protection against scratches and dings.
Key Features:
High-quality cast zinc alloy construction for durability
Show-quality chrome finish for a classic look
Custom-designed for a precise fit on specific Honda models
Easy installation with concealed screw mounts or countersunk outside screws
Compatibility: Designed to fit the following Honda models:
VT1100 Shadow (1988–1997)
VT1100C Shadow Spirit (1997–2007)
New Genuine Harley-Davidson Compression Spring (Part #40920-87). This OEM spring is factory-made to Harley-Davidson specifications and is an excellent replacement for worn or weakened springs in your motorcycle.
📌 Condition Note:
New OEM part — never installed
Genuine Harley-Davidson, not aftermarket
May show minor shelf wear from storage
See photos for details
Perfect OEM replacement if your current compression spring is worn, damaged, or missing.
Product Features:
Genuine Harley-Davidson OEM part
Part Number: 40920-87
Compression spring
Condition: new, factory original
Compatibility (verify with Harley manual before purchase):
Fits Harley-Davidson models that require spring PN 40920-87
Confirm exact year/model fitment with Harley service manual
Brand new K&L Fork Seals (Part #15-1437) designed for multiple Honda motorcycles. These OEM-quality seals are built to restore suspension performance and prevent fork oil leaks. Perfect replacement seals for vintage Honda models.
📌 Condition: New, never installed
📌 Includes: Fork seal set (as pictured)
📌 Fitment (Verify before purchase):
Honda XL200
Honda CB350 / CL350 / SL350
Honda CL360
Honda CB400
Honda CX500
NEW K&L Supply 15-2566 fork oil seals (ARS) in size 36×48×11 mm. High-quality replacement seals designed to restore front fork performance and prevent leaks.
Condition: New
Brand: K&L Supply
Part Number: 15-2566
Size: 36×48×11 mm
Type: Fork Oil Seals
📌 Features:
OEM-quality ARS seals
Reliable sealing to prevent oil leakage
Improves suspension function and ride quality
Direct replacement for worn or damaged seals
NEW K&L Supply 15-5091 fork oil seals (NOK) in size 39×51×8/10 mm. Designed for superior sealing and durability, ensuring smooth suspension performance.
Condition: New
Brand: K&L Supply
Part Number: 15-5091
Size: 39×51×8/10 mm
Type: Fork Oil Seals
📌 Features:
OEM-quality NOK seals
Precision fit for reliable suspension function
Helps prevent oil leaks and contamination
Improves fork performance and lifespan
NEW K&L Supply 15-1414 fork seals in size 30×42×10.5 mm. High-quality aftermarket replacement seals built to OEM standards for lasting suspension performance.
Condition: New
Brand: K&L Supply
Part Number: 15-1414
Size: 30×42×10.5 mm
📌 Features:
Precision-manufactured for reliable sealing
Reduces fork oil leakage and improves ride quality
Direct replacement for worn or leaking seals
Trusted brand in motorcycle parts and suspension service
