Genuine Harley-Davidson Front Wheel Hub (Part #43591-96B) for a 1999 Dyna FXDL Low Rider with a 3/4” axle. This OEM hub is structurally solid and ready to be installed.
📌 Condition Note:
Used OEM part
Normal cosmetic wear from age and use
Bearings included but should be inspected/replaced as standard maintenance
Price reflects its used condition
Perfect OEM replacement if your original hub is worn, damaged, or missing.
Product Features:
Genuine Harley-Davidson OEM part
Part Number: 43591-96B
Front wheel hub for 3/4” axle
Removed from 1999 Dyna FXDL Low Rider
Condition: used, see photos
Compatibility (verify with Harley manual before purchase):
1999 Harley-Davidson Dyna FXDL Low Rider
May also fit other Harley Dyna models using PN 43591-96B with 3/4” axle
OEM right-side air filter assembly for the 1999 Kawasaki VN1500 Vulcan. This includes the full housing and filter element as pictured. Genuine Kawasaki part #11011-1290, designed to maintain proper airflow and engine protection on the right side of the bike’s V-twin intake system. Excellent for replacing a cracked or missing stock unit.
Condition Notes:
Genuine Kawasaki OEM part #11011-1290
Used condition: surface wear, light scuffs, but structurally solid
Internal foam filter may need cleaning or replacement
All mounting tabs intact
Chrome trim may have minor pitting — see photos
Sold exactly as shown
Product Features:
Right-side air filter housing assembly
OEM fitment with factory bolt pattern
Designed for 1999 Kawasaki Vulcan VN1500
Helps maintain proper air intake and engine performance
Durable construction with factory-style chrome accents
Compatible Models:
1999 Kawasaki VN1500 Vulcan Classic
May also fit select VN1500 variants (verify part number 11011-1290 for exact match)
OEM 1999 Victory V92C clutch cover assembly, includes the ribbed clutch cover, stator, gasket, and full bolt set, along with the shifter shift shaft ratchet (part #1341317). A complete package for replacement or restoration of your Victory V92C.
📌 Condition Notes:
Genuine Victory OEM parts
Ribbed clutch cover with stator, gasket & bolts
Includes shifter shift shaft ratchet (1341317)
Chrome shows some flaking (see photos)
Used, fully functional
Product Features:
OEM Victory V92C clutch cover assembly
Includes stator, gasket, and all mounting bolts
Comes with shifter shift shaft ratchet (1341317)
Ribbed design with chrome finish
Condition: used, chrome flaking present
Compatibility (verify before purchase):
1999 Victory V92C
Check part numbers for additional model fitment
OEM Top Upper Engine Motor Mount Bracket Stay removed from a 1999–2003 Yamaha Road Star XV1600. This bracket secures the upper portion of the engine to the frame, providing stability and proper alignment.
📌 Condition Note:
Used part, structurally solid
Normal cosmetic wear from age and use (see photos)
No cracks, bends, or major damage
Perfect OEM replacement if your original upper motor mount bracket is bent, damaged, or missing.
Product Features:
Genuine Yamaha OEM part
Top/upper engine motor mount bracket stay
Removed from 1999–2003 Yamaha Road Star XV1600
Condition: used, see photos
Compatibility (verify with Yamaha parts manual before purchase):
1999 Yamaha Road Star XV1600
2000 Yamaha Road Star XV1600
2001 Yamaha Road Star XV1600
2002 Yamaha Road Star XV1600
2003 Yamaha Road Star XV1600
This set includes two K&L Supply Pro Series carburetor rebuild kits (18-2596) designed for 1988-1999 Yamaha XV1100 Virago models equipped with Mikuni carburetors. Manufactured to OEM-style specifications, these kits help restore proper carburetor performance by replacing worn seals, gaskets, jets, and internal fuel system components.
Ideal for carburetor overhauls, maintenance, or restoring smooth fuel delivery and throttle response.
Features:Brand: K&L SupplyPart Number: 18-2596Quantity: 2 carb rebuild kitsType: Pro Series carburetor rebuild / repair kitDesigned for Mikuni carburetorsOEM-style replacement componentsRestores fuel flow and throttle responseHelps eliminate leaks and poor idle
Fitment:
Yamaha Models:
XV1100 Virago:1988–1999
Mikuni carburetor applications
Notes:Includes two carburetor rebuild kitsDesigned for stock carburetor applicationsVerify compatibility before purchasing
Quantity of 2 Harley-Davidson fork clamp triple tree chrome covers, correct for vintage models including Knucklehead, Panhead, and Shovelhead. These covers provide a clean chrome finish for the fork clamp area and are ideal for restorations or custom builds.
Condition:
Used vintage OEM-style parts. Chrome finish shows normal aging and light wear but structurally solid. Great candidates for polishing or rechrome.
Fits Harley-Davidson Models:
Knucklehead
Panhead
Shovelhead
Other Harley big twins with matching triple tree setup
For sale is a set of 2 large clear bullet light lenses designed for Harley-Davidson motorcycles and other custom applications. These lenses are perfect as replacement front bullet light covers and are compatible with Kuryakyn 2347 bullet lights. High-quality glass ensures long-lasting clarity and durability.
📌 Condition Notes:
Set of 2 clear glass bullet light lenses
Fits Harley-Davidson custom bullet light housings
Replacement for Kuryakyn part #2347
Clean and ready for installation
Perfect for restorations, replacements, or custom builds
Compatibility (verify before purchase):
Harley-Davidson motorcycles using bullet-style front lights
Kuryakyn 2347 bullet light kits
Other custom chopper, cruiser, or bobber applications with large bullet light housings
Set of 2 Genuine Harley-Davidson Cylinder Base Stud Load Spacers (Part #16836-78). These are NOS (New Old Stock) OEM factory parts, perfect for authentic Harley engine rebuilds or restorations.
📌 Condition Note:
Genuine Harley-Davidson OEM parts
NOS (New Old Stock) — never installed
Includes 2 spacers in this listing
May show minor shelf wear from storage
Made in the USA
Perfect OEM replacements for missing or worn spacers when servicing Harley cylinder base studs.
Product Features:
Genuine Harley-Davidson OEM parts
Part Number: 16836-78
Cylinder base stud load spacers
Quantity: 2
Condition: NOS, factory original
Compatibility (verify with Harley manual before purchase):
Fits Harley-Davidson models requiring PN 16836-78
Commonly used in late 1970s and 1980s Big Twin engines
Confirm exact year/model fitment with Harley service manual
Up for sale is a brand new, new-old-stock (NOS) 2-pack lot of Candlepower H7 Long Life (LL) Halogen Headlight Bulbs, part number H7LL. This convenient twin-pack offers an excellent value way to replace both headlights simultaneously for a balanced beam output or keep a reliable spare tucked away in your garage. Each premium single-filament bulb is specifically engineered as a Long Life variant, utilizing an optimized heavy-duty filament structure to withstand severe road vibrations while delivering a consistent, crisp beam pattern that maximizes night visibility.
Featuring a standardized PX26d base design with a dual-prong terminal layout, these 55-watt bulbs serve as direct factory replacements designed to lock securely into corresponding projector or reflector headlight housings. Both bulbs come perfectly preserved inside their original vintage blue Candlepower retail boxes.
Specifications & Features:
Brand: Candlepower
Part Number: H7LL
Quantity Included: Two (2) Individual Bulbs (2-Pack Lot)
Bulb Type: H7 Long Life (LL) Halogen
Base Fitment Profile: PX26d (Dual Prong)
Electrical Specs: 12-Volt / 55 Watts
Certification Markings: E1, R37, and DOT Approved
Condition: New Old Stock (NOS) pristine unused condition in original retail boxes
Vehicle Fitment & Application:This H7 bulb features extremely broad, universal application across a wide array of cars, trucks, SUVs, and motorcycles utilizing standard H7 low-beam, high-beam, or dedicated fog light configurations:
Automotive Headlights: Fits thousands of domestic and import passenger vehicles from BMW, Audi, Volkswagen, Mercedes-Benz, Hyundai, Subaru, and Volvo requiring a standard 55W H7 bulb.
Sport & Touring Motorcycles: Popular factory headlight replacement bulb for various modern street bikes, sport bikes, and adventure tourers, including popular BMW Motorrad, Ducati, Kawasaki Ninja, Suzuki GSX-R, Yamaha YZF, and Honda CBR models.
OEM bracket support for a 2000 Buell M2 Cyclone, part number TT18. This factory bracket is a used component in good functional condition, suitable as a direct replacement for your Buell motorcycle. Please review photos for exact condition and details.
📌 Condition Notes:
Genuine Buell OEM bracket support
Part #: TT18
Used condition — shows normal wear (see pictures)
Sold as pictured, hardware not included
Product Features:
OEM Buell bracket support for M2 Cyclone
Sturdy construction, factory fit
Ideal for restoration or replacement
Condition: used, functional
Compatibility (verify before purchase):
2000 Buell M2 Cyclone
May fit other Buell models — confirm with parts catalog
Genuine Harley-Davidson Upper & Lower Triple Tree Set (Part #3247) removed from a 2000 Electra Glide Ultra Classic FLHTCUI. This OEM triple tree set secures the fork tubes to the frame and maintains proper alignment and stability of the front end.
📌 Condition Note:
Used OEM parts
Structurally solid and functional
Shows normal cosmetic wear from age and use (see photos)
Price reflects used condition
Perfect OEM replacements if your triple tree set is bent, cracked, or missing during a rebuild or restoration.
Product Features:
Genuine Harley-Davidson OEM part
Part Number: 3247
Upper and lower triple tree clamp set
Removed from 2000 Electra Glide Ultra Classic FLHTCUI
Condition: used, see photos
Compatibility (verify with Harley manual before purchase):
2000 Harley-Davidson Electra Glide Ultra Classic FLHTCUI
May also fit additional Touring models from the same year with matching front-end configuration
OEM Harley-Davidson top triple tree clamp with 6-inch bar risers and an original Harley handlebar clamp, correct for the 2000 Sportster XL883.
Condition:
The triple tree top clamp was chrome but is in poor condition — the chrome is badly flaked and it will need to be re-chromed or refinished.
The risers and handlebar clamp are included and remain usable.
Structurally solid, but priced accordingly due to cosmetic condition.
Fits Harley-Davidson Models:
2000 Sportster XL883
May fit additional Sportster models from that era (verify with parts manual).
OEM 2000 Victory V92C complete primary drive clutch assembly, part number 2907A. This unit is in excellent condition and looks practically new, showing minimal wear. A solid replacement part for your Victory V92C, perfect for riders restoring or repairing their motorcycle’s drivetrain.
📌 Condition Notes:
Genuine Victory OEM part
Part #: 2907A
Looks practically new — very light signs of handling
Complete assembly (see photos)
Used but excellent condition
Product Features:
OEM primary drive clutch for 2000 Victory V92C
Complete assembly with all major components
High-quality factory fit and finish
Condition: used, excellent shape, practically new
Compatibility (verify before purchase):
2000 Victory V92C
May fit additional V92 models — confirm with parts catalog
For sale is a Genuine OEM set of Harley-Davidson Fork Lowers for 2000–2001 Electra Glide models. These lower fork legs are original Harley parts, featuring correct casting marks and factory mounts.
📌 Fitment:
Fits 2000–2001 Harley-Davidson Electra Glide (FLHT / FLHTC / FLHTCU) models
OEM part numbers: 46497-00 and 4649-00 (casting code 2053A)
📌 Details:
Genuine Harley-Davidson Showa fork lowers
Designed for dual-disc front brake setup
Factory aluminum finish
Compatible with stock front suspension and wheel assemblies
📌 Condition:
Used condition. May show signs of light wear or surface marks from normal use. Structurally solid, with no cracks or stripped threads.
OEM Honda Hardware Lot for 2000–2001 CBR929RR / CBR900RR. This set includes assorted bolts and screws only (no nuts). They appear to be from the bottom-end engine assembly, likely including case bolts and some oil pan bolts.
Perfect for restorations, spare hardware, or replacing missing/worn fasteners on your CBR929RR.
📌 Condition Note:
Genuine Honda OEM hardware
Application: 2000–2001 CBR929RR / CBR900RR
Includes assorted bolts & screws (no nuts)
Likely from bottom-end and oil pan area
Used condition, see photos for details
Price reflects condition and mix
Product Features:
OEM Honda hardware assortment
Includes bolts & screws only (no nuts)
Application: Honda CBR929RR / CBR900RR (2000–2001)
Likely bottom-end and oil pan hardware
Condition: used, functional
Compatibility (verify with Honda manual before purchase):
2000 Honda CBR929RR / CBR900RR
2001 Honda CBR929RR / CBR900RR
Complete front and rear wheel set removed from a 2000–2005 Harley-Davidson Electra Glide. Both wheels include Avon 140/90 B16 tires that still hold air, but they are older and should be replaced before riding.
Wheels themselves are in good usable condition. No cracks or major damage. Great OEM replacement set for Touring models in this year range.
Please review all photos for condition and details.
Genuine Harley-Davidson Exhaust Muffler Set (Part Numbers 65094-00 and 65890-00) for 2000–2004 Harley Touring models. These OEM mufflers are stock Harley parts designed for proper fit, sound, and performance.
📌 Condition Note:
Used OEM parts
Structurally solid with normal cosmetic wear from age and use
No cracks or major damage (see photos)
Sold as a set of two mufflers
Perfect OEM replacements if your current mufflers are rusted, dented, or missing, or if you want factory-spec exhaust tone and fitment.
Product Features:
Genuine Harley-Davidson OEM parts
Part Numbers: 65094-00, 65890-00
Stock exhaust mufflers for Harley Touring models
Condition: used, see photos
Compatibility (verify with Harley service manual before purchase):
2000–2004 Harley-Davidson Touring models:
Electra Glide
Road King
Road Glide
Ultra Classic
Street Glide (where applicable)
OEM Harley-Davidson Right Front Fork Shock Tube for 2000–2006 Heritage Softail FLSTCI models. This factory fork tube is complete with studs, but it is missing the end cap.
📌 Condition Note:
Genuine Harley-Davidson OEM part
Application: 2000–2006 Heritage Softail FLSTCI
Right front fork shock tube with studs
Missing end cap
Coating was partially cleaned with a brass wire wheel, leaving visible marks
Needs refinishing (zinc coat, paint, or sandblast to bare metal)
Used condition — priced accordingly
Product Features:
OEM Harley fork shock tube, right side
Fits 2000–2006 FLSTCI Heritage Softail
Includes studs, missing end cap
Requires cosmetic refinishing
Condition: used, functional replacement
Compatibility (verify with Harley manual before purchase):
2000 Harley-Davidson FLSTCI Heritage Softail
2001 Harley-Davidson FLSTCI Heritage Softail
2002 Harley-Davidson FLSTCI Heritage Softail
2003 Harley-Davidson FLSTCI Heritage Softail
2004 Harley-Davidson FLSTCI Heritage Softail
2005 Harley-Davidson FLSTCI Heritage Softail
2006 Harley-Davidson FLSTCI Heritage Softail
Genuine Harley-Davidson FLH Touring / Bagger Chrome Engine Guards (Crash Bars), part reference #HD-L16 / PL248+. These guards are from the 2000s FLH platform and are in pretty clean condition with normal signs of use.
Chrome shines well with only light cosmetic wear — no bends, cracks, or structural issues. Perfect for Road King, Electra Glide, Street Glide, and similar Touring builds needing a solid OEM-style crash bar.
📌 Condition:
• Clean chrome finish
• Light cosmetic imperfections from use
• Structurally solid – no cracks or bends
• No hardware included
📌 Fitment (General FLH Touring):
• Road King FLHR
• Electra Glide FLHT / FLHTC / FLHTCU
• Street Glide FLHX
• Ultra Classic FLHTCU
• Other 2000s FLH Touring models
(Verify fitment for your exact year.)
📌 Includes:
• Chrome Engine Guard / Crash Bar
Brand new Harley-Davidson Softail Multibar Engine Guard, powder coated black and ready to install. This is a custom-style multi-bar crash/engine guard designed specifically for Softail models that use 11-inch spacing between the lower mounting points.
This guard fits a wide range of desirable Softail models including Deuce, Crossbones, Rocker, Breakout, and select Heritage / Heritage Springer models with the correct 11-inch lower mount spacing. Hardware is included.
⚠️ Important Fitment Note:
This engine guard WILL NOT FIT Softail models with 9.5-inch lower spacing, such as Fat Boy, Deluxe, or other Heritage models that use the narrower mount. Please verify your spacing before purchase.
Powder coated black for durability and a clean custom look. Excellent option for riders wanting added protection and aggressive styling.
For Sale: Genuine 2001 Harley-Davidson Sportster XLH883 OEM Airbox Cover.
📌 Details:
Fits 2001 Harley-Davidson Sportster XLH883 models
OEM Harley airbox intake cleaner cover
Used condition, may show normal wear and scratches (see photos)
Solid structure, ready to install
Great replacement for damaged or missing covers
Ideal for Sportster owners looking for a direct OEM replacement part.
For sale is a Harley-Davidson OEM Chrome Ignition Coil Pack Cover removed from a 2001 Harley-Davidson Fat Boy FLSTFI. This genuine Harley part is designed to fit the Twin Cam Softail models, offering a clean chrome finish to complement your engine bay while providing protection to your ignition coil assembly.
Perfect for restoring your Softail’s factory appearance or upgrading a worn or missing cover.
📌 Product Details:
Type: Ignition Coil Pack Cover
Finish: Chrome
Material: Steel
OEM Part: Harley-Davidson Factory Original
Condition: Used – Good condition with normal signs of wear
✅ Features:
Genuine Harley-Davidson OEM fit and finish
Chrome-plated steel for durability and shine
Protects ignition coil from dust and debris
Easy bolt-on installation
Ideal replacement or upgrade for 2000–2006 Softail models
📏 Fitment:
Fits the following Harley-Davidson models:
2000–2006 Fat Boy (FLSTF, FLSTFI)
2000–2006 Softail Heritage Classic (FLSTC, FLSTCI)
2000–2006 Softail Standard (FXST, FXSTI)
2001–2006 Softail Deuce (FXSTD, FXSTDI)
2000–2006 Softail Springer (FXSTS, FLSTS)
(Confirm part number for exact year compatibility.)
📎 Condition Notes:
Light wear from use, chrome still shines nicely
No cracks or major dents
Mounting tabs intact
Shifter Linkage Lever removed from a 2001 Titan Fenix Softail equipped with a JIMS transmission. This linkage lever connects the shift rod to the transmission shifter arm, ensuring smooth gear changes.
📌 Condition Note: Used, with normal wear from age and use. Chrome still presents well overall. Photos show the exact item you will receive.
A great replacement if your Titan’s shift linkage lever is missing, worn, or damaged.
Product Features:
Fits 2001 Titan Fenix Softail (custom production motorcycle)
Designed for JIMS transmission setups
Shifter linkage lever, chrome finish
Durable aftermarket construction
Condition: used, see photos
Compatibility (verify before purchase):
2001 Titan Fenix Softail with JIMS transmission
May fit additional Titan models or custom builds using JIMS transmissions
