This is a genuine OEM engine block / crankcase set for the 1987–1988 Honda Shadow 1100 (VT1100C), including left and right crankcase halves with the original case bolts.
These cases form the foundation of the engine, housing the crankshaft, transmission, and internal oiling passages. Ideal for engine rebuilds, repairing damaged cases, or starting a correct OEM restoration. Using matching OEM case halves helps ensure proper alignment and fitment of internal components.
A solid option for builders looking for factory Honda components rather than aftermarket replacements.
Features
Genuine OEM Honda engine crankcase halves
Includes left & right (L/R) crankcase halves
Includes OEM case bolts
Factory-correct castings and mounting points
Ideal for engine rebuilds or restoration projects
Designed for VT1100 Shadow 1100 engines
Fitment
1987 Honda Shadow 1100 (VT1100C)
1988 Honda Shadow 1100 (VT1100C)
✔ Fits VT1100C models only
✔ Verify compatibility with your specific engine components before purchase
Genuine Harley-Davidson Lower Triple Tree Cover Trim in chrome, removed from a 1988 FLHTC Electra Glide. This trim piece mounts on the lower triple tree and adds a polished chrome finish to the front end.
📌 Condition Note:
Used, chrome in good shape overall
Very minimal rust present (see photos)
Structurally solid and ready to install
A great OEM replacement if your existing triple tree cover is missing, pitted, or worn.
Product Features:
Genuine Harley-Davidson part
Chrome lower triple tree cover trim
Removed from a 1988 Electra Glide FLHTC
Minimal rust, overall good condition
Condition: used, see photos
Compatibility (verify fitment before purchase):
1988 Harley-Davidson FLHTC Electra Glide
May fit additional late ’80s Harley Touring models with matching lower triple tree design
Platform Fitment Bounds: Direct factory drop-in maintenance replacement or custom bobber project safety spindle for standard original equipment rear wheel hubs on 1987 to 1988 Honda V45 Magna models:
1987–1988 Honda Magna 750 (VF750C V45 Second Generation)
OEM lower triple tree clamp with steering stem for 1989 Harley-Davidson Softail models. This factory part secures the fork tubes and steering stem, ensuring proper alignment and handling of the front end.
Condition:
Used OEM part. Structurally solid with normal cosmetic wear from age and use. Ready to install or refinish as needed.
Fits Harley-Davidson Models:
1989 Softail (verify exact fitment with Harley parts manual)
Meta Description
1989 Harley-Davidson Softail OEM lower triple tree clamp with steering stem. Solid used factory part.
For sale is an OEM Harley-Davidson chrome horn cover assembly removed from a 1989 Harley Softail. This is a genuine factory Harley part featuring the classic chrome finish and timeless teardrop design commonly seen on late ’80s and early ’90s models.
The chrome surface shows minor blemishes and light aging, but overall the part remains in great usable condition with no cracks or major dents. Ideal for restorations, replacements, or custom Softail builds seeking an authentic factory appearance.
📌 Fitment:
1989 Harley-Davidson Softail models
May fit other Harley Evo Softail models from similar years (verify fitment before purchase)
📌 Features:
Genuine OEM Harley-Davidson horn cover assembly
Chrome finish with classic Harley styling
Factory mounting tabs intact
Great for OEM restorations or replacements
📌 Condition Notes:
Used, good condition
Light pitting and minor scuffs present
Structurally sound and ready to mount
OEM Koito dual headlight housing assembly removed from a 1989 Yamaha FZR600 (Y638-1). This is the complete housing unit for the dual headlamp setup, ideal for restoration or as a replacement part.
📌 Condition Notes:
Genuine Yamaha OEM part (Koito)
Dual headlight housing assembly, Y638-1
Shows rust and dirt from age and storage (see photos)
Structurally intact, can be cleaned/restored
Price reflects current condition
Product Features:
OEM Koito headlight housing for Yamaha FZR600
Factory dual headlamp design
Original 1989 part, hard to find
Condition: rusty/dirty, needs restoration
Compatibility (verify before purchase):
1989 Yamaha FZR600
Koito Y638-1 headlight assembly
May fit additional FZR600 years — verify with part number
OEM Starter Motor removed from a 1991 Harley-Davidson FXDB Sturgis. This factory Harley starter is in used condition with paint peeling, visible rust, and cosmetic wear as shown in the photos and video. Despite the cosmetic flaws, it is structurally solid and priced accordingly.
Great replacement for riders looking for a functional OEM starter at a fair price, especially if appearance is not a concern.
Product Features:
Genuine OEM Harley-Davidson part
Removed from 1991 FXDB Sturgis
Starter motor assembly
Paint peeling and rust present (cosmetic wear)
Condition: used, see video & photos for exact details
Compatibility (verify with Harley manual before purchase):
1991 Harley-Davidson FXDB Sturgis
May fit other early-1990s Harley Big Twin models (check part number for exact fitment)
Possible OEM 1991–1992 Suzuki GSXR 750 Euro-style front fender.
Structurally solid with no cracks, but needs paint and shows typical wear from age.
Great for restoration, streetfighter builds, or replacing a damaged stock unit.
Fitment matches styling and dimensions commonly found on early ’90s GSX-R models, but please confirm fitment to your specific bike before purchase.
Please review all photos for exact condition.
OEM front right footrest/peg for a 1992 Yamaha Virago XV1100 Cruiser. This genuine Yamaha part is ideal for replacing a worn or missing footrest, keeping your Virago comfortable and road-ready.
📌 Condition Notes:
Genuine Yamaha OEM part
Front right footrest peg
Removed from a 1992 XV1100 Virago
Used condition with typical wear — see photos
Structurally sound, ready to install
Product Features:
OEM Yamaha footrest peg
Fits right front position
Durable steel and rubber construction
Factory direct replacement
Condition: used
Compatibility (verify before purchase):
1992 Yamaha Virago XV1100 Cruiser
May fit other Virago XV1100 years — confirm with parts manual
OEM rear brake caliper removed from a 1992 Yamaha V-MAX 1299 (2WE).
Part ID: A4004.
This caliper is missing one piston. The remaining piston(s) and housing are untested. Expect to rebuild or use for parts. Mounting points and bracket surfaces look intact. Please review all photos for exact condition.
Compatibility:
✔ 1992 Yamaha V-MAX 1299 (2WE)
(May fit additional V-MAX years/models—verify with part number.)
Includes:
Rear brake caliper (A4004) as shown
No pads or hardware unless pictured
This listing includes two genuine Honda Shadow parts:
Right Side Lower Seat Cover Panel (Chrome) – OEM chrome side seat panel for a 1993 Honda Shadow 1100 VT1100C, adds clean styling and functional coverage.
Exhaust Heat Shield Cover – OEM exhaust shield for Honda Shadow Spirit VT1100 models, designed to protect from heat and enhance chrome styling.
📌 Condition Notes:
Genuine OEM Honda parts
Used, with normal wear (see photos)
Chrome shows light scratches and age-related wear
Structurally solid and functional
Product Features:
OEM Honda chrome right seat cover panel (1993 VT1100C)
OEM Honda Shadow VT1100 Spirit exhaust heat shield
Durable factory chrome finish
Direct replacement parts for restoration or repair
Condition: used, functional
Compatibility (verify before purchase):
Honda Shadow 1100 VT1100C (1993) — right side seat cover panel
Honda Shadow Spirit VT1100 — exhaust heat shield cover
Confirm fitment with Honda parts catalog
For sale is a genuine OEM subframe rail chassis with hardware for a 1993 Honda Shadow VT1100C. This is an original Honda part designed for proper fitment and structural support of your motorcycle’s frame assembly.
📌 Product Details:
OEM Honda subframe rail chassis
Includes mounting hardware as shown in photos
Fits: 1993 Honda Shadow VT1100C
Durable steel construction for long service life
Condition: Used, see pictures for exact details
This is a great replacement part if your existing subframe is damaged, bent, or rusted. A solid foundation for restoring or maintaining your Honda Shadow VT1100C.
Genuine Harley-Davidson Ignition Coil removed from a 1994 Road King EVO (carbureted). This coil is a key part of the ignition system, providing spark to the engine.
📌 Condition Note:
Used OEM part
Includes a custom bracket (purpose/fitment unknown — see photos)
Structurally solid, with normal cosmetic wear
Tested functional before removal
Price reflects condition and included bracket
Perfect OEM replacement for your Evo-powered Road King, or a good spare coil for a custom Harley build.
Product Features:
Genuine Harley-Davidson OEM part
Ignition coil assembly
Removed from a 1994 Harley-Davidson Road King Evo (carbureted)
Includes custom bracket (fitment unknown)
Condition: used, tested functional
Compatibility (verify with Harley manual before purchase):
1994 Harley-Davidson Road King (FLHR Evo)
May fit other Evo Touring models of the same era with matching coil setup
For sale is an OEM Harley-Davidson rear fender removed from a 1994 Sportster XL1200C / XL883C.
This is a genuine factory fender, not aftermarket, ideal for restoration projects or replacements where original fitment matters. The fender is structurally solid but not perfect — it shows typical wear such as small scratches, scuffs, and minor imperfections consistent with age and use. Please refer to the photos for exact condition.
Perfect for anyone restoring an older Sportster or looking for a direct OEM replacement without paying new-dealer prices.
📌 Product Details:
Type: Rear Fender
Brand: Harley-Davidson (OEM)
Fitment: 1994 XL1200C and XL883C Sportster models
Material: Steel
Finish: Factory paint – worn / aged
Condition: Used – Imperfect (scratches and blemishes present)
Mounting: Direct bolt-on for OEM hardware
📏 Features:
✅ Genuine Harley-Davidson OEM part (not reproduction)
✅ Direct factory fit for 1994 Sportster XL1200C & XL883C
✅ Solid structure with no major cracks or rust-through
✅ Ideal for custom projects or restoration builds
OEM Yamaha XV1100 Virago 3LP Clutch Worm Cover (1995). This original Yamaha part includes the cover/trim for the clutch worm mechanism. A solid replacement piece for Virago owners restoring or repairing their bike.
📌 Condition Note:
Genuine Yamaha OEM part
Application: 1995 XV1100 Virago 3LP
Used, see photos for exact condition
Structurally sound, cosmetic wear may be present
Price reflects condition
Perfect replacement for restoration projects, maintenance, or functional OEM swaps on the Yamaha XV1100 Virago.
Product Features:
OEM Yamaha part
Part type: clutch worm cover / trim
Application: XV1100 Virago 3LP (1995)
Condition: used, clean, functional
Compatibility (verify with Yamaha manual before purchase):
Yamaha XV1100 Virago 3LP (1995)
May fit other XV1100 years/models — confirm via Yamaha parts catalog
OEM Yamaha Right Side Cover / Fender Cover from a 1995 Yamaha XV1100 Virago. This part has been spray painted black and shows scratches and cosmetic wear. Structurally sound and still a usable replacement for riders looking for an affordable OEM piece.
📌 Condition Note:
Genuine Yamaha OEM part
Fits 1995 XV1100 Virago
Spray painted black
Scratched and worn — see photos for details
Structurally solid
Price reflects condition
Perfect budget-friendly option for Virago owners who need a functional right side cover and don’t mind cosmetic flaws.
Product Features:
OEM Yamaha part
Application: 1995 Yamaha XV1100 Virago
Right side cover / fender cover
Spray painted black, scratched
Condition: used, structurally good
Compatibility (verify with Yamaha manual before purchase):
1995 Yamaha XV1100 Virago
May fit additional XV1100 years/models — confirm with Yamaha parts catalog
Genuine Harley-Davidson Exhaust Muffler (Part #65592-09A) for Touring models 1995–2016, including Electra Glide and Road Glide. This OEM muffler is designed for proper fit, sound, and performance on Harley Touring bikes.
📌 Condition Note:
Used OEM part
Structurally solid, normal cosmetic wear from age/use (see photos)
No major cracks or damage
Price reflects used condition
Perfect OEM replacement if your current muffler is damaged, rusted, or you need a stock replacement for your Harley Touring model.
Product Features:
Genuine Harley-Davidson OEM part
Part Number: 65592-09A
Touring muffler assembly
Fits Harley Touring models 1995–2016
Condition: used, functional
Compatibility (verify with Harley service manual before purchase):
1995–2016 Harley-Davidson Touring models
Electra Glide, Road Glide, Road King, Street Glide, Ultra Classic, etc.
For sale is a Harley-Davidson under seat chrome grab handle removed from a 1996 Electra Glide Classic FLHTCI. This OEM chrome handle mounts beneath the seat and serves as a convenient grab bar or lift handle for the rear section of the bike.
It’s in good used condition with normal light wear and chrome marks consistent with age — ideal for restoration or replacement of a missing or worn handle.
📌 Product Details:
Brand: Harley-Davidson (OEM)
Type: Under Seat Grab Handle
Material: Steel with chrome finish
Condition: Used – light wear and aging on chrome (see photos)
Fitment:
1996 Harley-Davidson Electra Glide Classic FLHTCI
May fit other Touring models with similar seat and frame design (verify before purchase)
📏 Features:
✅ Genuine Harley-Davidson OEM part
✅ Chrome finish for a classic look
✅ Mounts under the seat — easy installation
✅ Perfect replacement for worn or missing handle
✅ Solid steel construction
OEM frame side cover panel for the 1996 Harley-Davidson Sportster XL883 Hugger. This panel mounts securely to the side of the frame, helping protect components while maintaining the factory look.
Condition:
Used OEM part. Shows normal cosmetic wear from age but structurally solid and ready to install.
Fits Harley-Davidson Models:
1996 XL883 Sportster Hugger
May also fit other Sportster models from similar years (verify with part number)
Genuine OEM Honda rear wheel removed from a 1996 Honda Shadow Spirit VT1100C. This is an original factory rear rim, ideal for restoration, replacement, or a clean OEM spare.
The tire is included and does hold air, however the age is unknown, and replacement is recommended for safety. The white residue visible on the rim and tire is NOT paint — it is polishing compound that accidentally exploded in the shop. It will be fully cleaned before shipping.
We list inventory daily and move fast, but if you check our reviews you’ll see we stand by our word and our parts.
Includes:
OEM Honda rear wheel rim
Mounted tire (age unknown, holds air)
Condition Notes:
Tire included but recommended to replace due to unknown age
White residue is polishing compound, not paint
Used OEM condition
No visible cracks or structural damage
Sold as shown
OEM front fork suspension springs with caps, washers, and related internals for Honda Shadow 1100 and Shadow Spirit 1100 (1996–2000). This set includes the factory fork springs, fork caps, washers, and supporting tubes as shown in the photos. Designed to provide the stock suspension performance for your Honda cruiser.
📌 Condition Notes:
Genuine Honda OEM parts
Includes springs, fork caps, washers, and tubes (see photos)
Factory-rated springs from Honda
Used but in good working condition
Normal cosmetic wear from age
Product Features:
OEM Honda fork suspension springs with internals
Fits Honda Shadow 1100 & Shadow Spirit 1100 (1996–2000)
Includes fork springs, caps, washers, and tubes
Direct factory replacement for stock suspension setup
Condition: used, functional
Compatibility (verify before purchase):
Honda Shadow 1100 (1996–2000)
Honda Shadow Spirit 1100 (1996–2000)
Confirm fitment with Honda parts catalog
Genuine Harley-Davidson Air Breather Back Plate (Part #1229) removed from a 1997 Electra Glide. This OEM backing plate is the factory base for the stock Harley air cleaner assembly.
📌 Condition Note:
Used OEM part
Structurally solid and functional
Normal cosmetic wear from age and use (see photos)
Ready to install — price reflects used condition
Perfect OEM replacement if your original back plate is bent, damaged, or missing.
Product Features:
Genuine Harley-Davidson OEM part
Part Number: 1229
Air breather back plate
Removed from 1997 Electra Glide
Condition: used, see photos
Compatibility (verify with Harley manual before purchase):
1997 Harley-Davidson Electra Glide (FLHT, FLHTC, FLHTCU)
May also fit other 1997 Harley Touring models using the same air breather plate
Condition Details: Vintage rider-grade pre-owned condition. The oil bag tank is structurally excellent, completely solid, and 100% leak-free, featuring solid factory weld lines and clean structural mounting ears. The exterior surface retains its original gloss black finish, displaying authentic patina, minor scuffs, light surface scratches, and typical trace oil residue inside the lines as pictured. All critical rubber isolation mounts and hardline bungs are intact, true, and fully functional for immediate custom chopper mockup or factory restoration service.
Platform Fitment Bounds: Direct factory drop-in maintenance replacement or safety upgrade for standard original equipment frame rails on carburetor-equipped, rigid-mount Evolution Sportster models spanning 1994 to 2003:
1994–2003 Sportster 883 Base (XLH883) / Hugger (XLH883HUG) / Deluxe (XLH883DLX)
1994–2003 Sportster 1200 Standard (XLH1200) / Custom (XL1200C) / Sport (XL1200S)
