OEM Harley-Davidson 39mm fork leg, part number 45919-87, compatible with 1999 & earlier FXR, Dyna, and Sportster models. This is a genuine Harley front fork leg (EPS23243) and is ideal as a replacement for a damaged or worn fork leg.
📌 Condition Notes:
OEM Harley-Davidson fork leg, #45919-87
Fits FXR, Dyna, and Sportster models 1999 & earlier
Used condition — may show wear, scratches, or blemishes (see photos)
Sold as pictured, hardware not included
Product Features:
Genuine Harley-Davidson 39mm fork leg
Durable OEM construction
Direct bolt-on replacement
Designed for pre-2000 Harley FXR, Dyna, and Sportster motorcycles
Condition: used, functional
Compatibility (verify before purchase):
Harley FXR (≤1999)
Harley Dyna (≤1999)
Harley Sportster (≤1999)
Confirm fitment with parts catalog before ordering
Fork Seal Set – Size: 41x53x8mm
Part No: 42-9034 / DR2 41-53-8
This high-quality aftermarket fork seal set is compatible with front forks using 41mm tubes and 53mm outer diameter, 8mm height. These seals are ideal for restoring your front suspension performance and preventing oil leakage in vintage and modern motorcycles. Suitable for multiple makes and models across Honda, Yamaha, Kawasaki, and Suzuki with 41mm forks.
Commonly Fits Models Including (verify dimensions):
Honda CB750F / CB900F
Yamaha XS650
Kawasaki KZ1000
Suzuki GS750 / GS1000
(Always confirm fork size before ordering)
Genuine OEM Harley-Davidson rear brake drum and wheel hub assembly, part number 508, featuring a 51-tooth sprocket. This setup is correct for many 1952–1976 Harley Ironhead Sportster and early Shovelhead models using drum brake rear ends.
Details:
OEM Harley part #: 508
Rear wheel brake drum & hub with 51-tooth sprocket
Cast steel/brake drum combo
Original Harley piece — not aftermarket
Accepts internal rear drum brake system
May fit both rigid and swingarm frames
Condition:
Used vintage condition. Teeth are solid, and the brake drum surface shows age but no major cracks or damage. Cleaned and ready for further service. Great for OEM restorations or period-correct choppers.
Fitment (verify before purchase):
1952–1976 Harley-Davidson Ironhead Sportster XL/XLH/XLCH
May fit early Shovelhead FL / FLH / FX models with drum rear setups
(Confirm compatibility with your model year or consult factory parts book.)
OEM upper triple clamp (top tree) for 1972–1976 Harley-Davidson XLH 1000 Ironhead Sportster models. This steel upper tree secures the fork tubes and handlebars and is essential for front-end alignment and stability.
This genuine Harley-Davidson part is in good used condition, with solid threads and no cracks or structural damage. It shows typical surface wear from age but is structurally sound and ready for restoration or reinstallation. A great option for Ironhead builders or vintage restorers looking for original Harley parts.
Fits the following models:
1972–1976 Harley-Davidson XLH 1000 Sportster
(May also fit other Ironhead variations; confirm fork tube diameter before purchase.)
Specs:
Position: Upper (top) triple clamp
Material: Steel
Condition: Used, OEM
Finish: Bare metal or worn factory paint
Notes: Threads and alignment holes intact
OEM Fitment Notes:
For use with narrow glide front ends. Check fork diameter and riser compatibility.
OEM inner primary cover for a 1992 Harley-Davidson FLHT Electra Glide, part number 60677-89. This aluminum housing mounts between the engine and transmission on 5-speed Big Twin models. Designed to house the primary drive system including the stator, rotor, and primary chain. Ideal for restoration, replacement of cracked or damaged cases, or custom builds using Evolution motors.
Condition Notes:
OEM Harley-Davidson part #60677-89
Used condition: shows signs of wear, scuffs, and oil residue
No cracks or breaks — all mounting holes intact
Threads appear clean and functional
Sold exactly as shown — inspect photos closely
Product Features:
Factory inner primary housing
Fits Evolution 5-speed Big Twin models
Cast aluminum construction
Accepts OEM primary components
Ideal for stock or custom applications
Compatible Models:
1990–1993 Harley-Davidson FLHT / FLHTC Electra Glide
1990–1993 FLHS / FLHR Road King
1990–1993 FLTC / FLTCU Tour Glide
(Verify with Harley service manual if swapping between models)
OEM Harley-Davidson left-side crankcase for 1970–1978 74” Shovelhead Big Twin models, part number 24563-70. This factory-cast aluminum case is correct for FL, FLH, and FX models with the 1200cc Shovelhead motor.
This is a great candidate for a builder or restorer — a small corner near one of the head stud bosses has been partially repaired and needs finishing (see images). The structural repair was started with welding and will need to be completed and dressed. No signs of major damage elsewhere. Threads and mating surfaces appear restorable.
This case does not display a motor number or identification stamp in the usual area — ideal for custom or replacement builds. Sold as shown for parts or repair. May need machine work or final prep before assembly.
OEM Part Number:
24563-70
Fits the following Harley-Davidson models (Shovelhead 74” 1200cc):
1970–1978 FL
1970–1978 FLH
1970–1978 FX
Specs:
Engine: 74” Shovelhead
Material: Cast aluminum
Side: Left
Condition: Used, with repair in progress
VIN Pad: Blank/unstamped
Notes: Rewelded corner near head studs, needs completion
ACDelco Professional Starter Drive (Part #U2010). This OEM-quality starter drive provides reliable engagement and performance in various automotive and industrial starter applications.
📌 Condition Note:
Used condition — see photos for details
Tested solid, but shows normal cosmetic wear from age/use
Price reflects used condition
Genuine ACDelco Professional part
Perfect for budget-conscious buyers needing a replacement starter drive without the cost of a brand new unit.
Product Features:
Brand: ACDelco Professional
Part Number: U2010
Starter drive assembly
OEM-quality aftermarket part
Condition: used
Compatibility (verify with ACDelco catalog before purchase):
Fits applications requiring ACDelco U2010 starter drive
Confirm with ACDelco parts catalog for exact fitment (automotive/industrial)
The Add On 293-302 Chrome Kickstand Extension is a practical and stylish accessory designed to enhance the functionality of your Honda Gold Wing’s kickstand. Crafted from durable materials with a chrome-plated finish, this extension provides an easier reach to the kickstand, especially beneficial for riders with shorter inseams or those who have added floorboards or other accessories that may obstruct access. Its sleek design seamlessly integrates with the motorcycle’s aesthetics, offering both convenience and a custom look.
Key Features:
Chrome-plated finish for a custom appearance
Extends the kickstand for easier access
Simple bolt-on installation
Durable construction for long-lasting use
Compatibility:
This kickstand extension is compatible with the following Honda Gold Wing models:
GL1000: 1975–1979
GL1100: 1980–1983
GL1200: 1984–1987
Note: Please verify fitment with your specific motorcycle model and year before installation.
The Add On Accessories 424-062A Antenna Relocation Bracket is designed to reposition the stock antenna on 1980–1987 Honda Gold Wing GL1100 and GL1200 models. This simple chrome-plated bracket allows for custom placement of your antenna, helping to accommodate luggage racks, passenger armrests, or custom trunks.
Key Features:
Compatible with stock or aftermarket antennas
Chrome-plated steel construction for durability
Pre-drilled holes for direct bolt-on installation
Designed specifically for 1980–1987 Gold Wing models
Helps improve clearance for accessories or trunk lids
Compatibility:
Honda GL1100 Gold Wing – 1980–1983
Honda GL1200 Gold Wing – 1984–1987
Enhance your motorcycle's aesthetics with the Add On Accessories #6 Chrome Snap Caps (Part #252-214). This 10-pack of chrome-plated ABS caps is designed to conceal #6 screw heads, providing a polished and finished look to your bike. Each cap is accompanied by a liner for secure attachment, ensuring durability and a seamless appearance. Ideal for Honda Goldwing models and other motorcycles utilizing #6 screws, these snap caps are a simple yet effective way to upgrade your bike's detailing.
Compatibility:
Fits #6 screw heads
Suitable for Honda Goldwing models and other motorcycles using #6 screws
Enhance your Honda Gold Wing's handlebar aesthetics with the Add On Accessories 15793-204P Chrome Master Cylinder Cover. This high-quality chrome-plated cover is designed to fit seamlessly over the existing master cylinder, providing a sleek and polished look. Crafted for durability and style, it complements the overall design of your motorcycle while offering protection to the master cylinder.
Key Features:
Chrome-plated finish for a stylish appearance
Designed to fit over the existing master cylinder
Easy installation with no modifications required
Durable construction for long-lasting use
Compatibility: Fits the following Honda Gold Wing models:
GL1500 (All Years)
GL1800 (All Years)
The Add On Accessories 77-6037 Chrome Flat Clamp is a two-piece chrome clamp designed to securely attach flagpoles or similar accessories to the flat luggage rack rails of the Honda Gold Wing GL1800. Its polished chrome finish complements the bike’s aesthetics, ensuring a seamless integration with the motorcycle’s design. This clamp is commonly included in flagpole kits, such as the 12-inch flagpole set with ball, providing both functionality and style for Gold Wing enthusiasts .
🔧 Fitment Compatibility
Motorcycle: Honda Gold Wing GL1800
Years: 2001–2017
Mounting Location: Flat luggage rack rails
Common Use: Mounting flagpoles or similar accessories
The Add-On 424-062 Antenna Mount is designed for Honda Goldwing GL1100 models and offers a reliable solution for mounting a radio or CB antenna. Built with durable construction and a precise fit, this bracket is ideal for restoring factory-style communications functionality on your GL1100. It installs at the rear of the bike and works with stock and aftermarket antenna systems.
Product Features:
Add-On Inc. part number 424-062
Rear antenna mounting bracket
Direct fit for Honda Goldwing GL1100
Steel construction with chrome finish
Compatible with CB and AM/FM antennas
Designed for easy installation on stock mounting points
Compatible Models:
1980 Honda Goldwing GL1100
1981 Honda Goldwing GL1100
1982 Honda Goldwing GL1100
1983 Honda Goldwing GL1100
(Fits Interstate and Aspencade trim levels where applicable.)
Add On Accessories chrome water pump cover designed specifically for the Honda Valkyrie. High-quality chrome finish enhances the bike's appearance while providing durable protection for the water pump. Ideal for customizing or restoring your Valkyrie with a polished, stylish look.
Compatibility:
Honda Valkyrie (1997–2003)
Description:Add On Accessories Driver Mugger Mount for Honda Goldwing GL1500 and GL1800. This durable mounting bracket is designed to securely hold the Driver Mugger cup holder (sold separately). Engineered for long-distance riders, it provides stable and convenient placement of the drink holder directly within the rider's reach. Chrome-compatible fit with OE styling.
Compatibility:
Honda Goldwing GL1500 (1988–2000)
Honda Goldwing GL1800 (2001–2017)
Designed to fit Add On Accessories Driver Mugger drink holders
Upgrade your touring experience with the Add On Inc Bike Buoy Drink Holder Mount (Part #15503D/P), designed specifically for Honda GL1500 Goldwing models. This chrome-finished mount provides a secure and stylish solution for attaching the Bike Buoy drink holder, ensuring your beverage is within easy reach during rides. Crafted for durability and seamless integration, it's an ideal accessory for long-distance riders seeking convenience without compromising the classic Goldwing aesthetic.
Compatibility:
Honda Goldwing GL1500 models (1988–2000)
Upgrade your Honda Goldwing GL1800 with the Add On Side Fairing Grilles with Mesh (Part #45-1629NUB). Designed to replace the stock fairing grilles, these accessories offer improved airflow to the engine compartment, aiding in better temperature regulation. The integrated mesh adds a stylish touch while protecting internal components from road debris. Crafted for a precise fit, these grilles seamlessly integrate with your motorcycle's existing fairing.
🔑 Key Features:
Enhanced Airflow: Improves ventilation to the engine compartment for better cooling.
Protective Mesh: Shields internal components from debris while adding a custom look.
Direct Replacement: Designed to replace OEM fairing grilles without modifications.
Durable Construction: Built to withstand the rigors of the road.
Aesthetic Upgrade: Adds a sleek, customized appearance to your Goldwing GL1800.
🛠️ Compatible Models:
Honda Goldwing GL1800 (specific years may vary; please verify compatibility with your model year)
Note: Please confirm fitment with your specific model and year before purchasing.
Enhance the appearance of your Honda GL1500 Gold Wing with the ADD ON® Reflector Grilles. These chrome-plated grilles are designed to fit over the side reflectors, adding a sleek and custom look to your motorcycle. Crafted from high-quality materials, they provide both durability and a brilliant finish that complements the classic style of the Gold Wing.
Custom Fitment: Specifically designed for Honda GL1500 Gold Wing models, ensuring a precise fit over the side reflectors.
Premium Construction: Made from durable materials with a chrome-plated finish for long-lasting shine and resilience.
Easy Installation: Attaches securely over existing reflectors with included hardware, requiring no modifications.
Enhanced Aesthetics: Adds a touch of elegance and personalization to your motorcycle's appearance.
Upgrade your Gold Wing's style effortlessly with these ADD ON® Reflector Grilles, combining functionality with a custom look.
📅 Compatibility List:
Honda GL1500 Gold Wing
Note: This product is specifically designed for Honda GL1500 Gold Wing models. Please verify fitment with your specific model year before purchase.
Description:
Upgrade your Honda Goldwing GL1800 with this Add-On 12-6100CA Oval Amber LED Marker Light Assembly. This premium LED light features a sleek oval design with a bright amber glow that enhances visibility and gives your bike a custom look. It’s a perfect addition for riders seeking both style and safety on the road.
Direct replacement LED marker light assembly
Bright amber lens for improved visibility
Durable, weather-resistant housing
Designed for Honda Goldwing GL1800 models
Easy plug-and-play installation
This is a rare and discontinued part — ideal for restorations, custom builds, or replacing worn factory lighting.
Add-On 20-1601 Chrome Tail Light Grill for Honda VT600 Shadow VLX
Enhance the rear aesthetics of your Honda VT600 Shadow VLX with the Add-On 20-1601 Chrome Tail Light Grill. This accessory adds a sleek chrome accent over your tail light, providing both style and protection. Crafted from high-quality materials, the grill is designed to fit seamlessly over the existing tail light, offering a custom look without extensive modifications.
🔑 Key Features:
Custom Fit: Specifically designed for the Honda VT600 Shadow VLX, ensuring a perfect fit.
High-Quality Construction: Made from durable materials with a chrome finish for long-lasting shine and resistance to elements.
Easy Installation: Mounts directly over the existing tail light with minimal tools required.
Stylish Design: Adds a custom chrome accent to the rear of your motorcycle, enhancing its overall appearance.
Protective Function: Offers an additional layer of protection to the tail light lens against minor impacts and debris.
🛠️ Compatible Models:
Honda VT600 Shadow VLX (1988–2008)
Enhance the look of your Honda Goldwing GL1800’s trunk with the Add-On 45-1821 Top Case Lock Trim. This chrome accent piece installs easily around the top case lock, providing a finished appearance and protecting the painted surface from scratches. Designed for a precise fit, it blends seamlessly with your existing Goldwing chrome accessories and adds a custom touch to your touring bike.
Key Features:
Polished chrome finish for a custom, premium appearance
Protects trunk area around the lock from scratches and wear
Easy, secure installation with pre-applied adhesive
Durable construction resists rust and weather
Designed specifically for the Goldwing GL1800 trunk
Compatibility:Fits Honda Goldwing GL1800 models from 2001 to 2017.
Add a finishing touch to your Honda Goldwing GL1800 with the Add-On Inc Chrome Horn End Cap (Part #45-6103). This custom-fit end cap installs over the stock horn and adds a polished chrome accent that blends perfectly with the Goldwing’s existing trim. Built from quality materials, it offers a simple and affordable way to personalize your ride.
Key Features:
Chrome-plated finish enhances the factory horn’s appearance
Easy snap-on installation—no tools or hardware required
Designed to fit snugly over the OEM horn housing
Durable construction resists rust and weathering
Complements other chrome accessories for a unified look
Compatibility:Fits Honda Goldwing GL1800 models from 2001 to 2017.
Customize your Honda Goldwing GL1100 with the Add-On 798-162 Handlebar Clamps with Emblem. These chrome-plated clamps feature a decorative Goldwing emblem and are designed to replace the factory handlebar clamps with a more stylish, vintage-inspired look. Made from durable metal, these clamps not only enhance your bike’s aesthetics but also maintain a secure hold on the handlebars.
Key Features:
Chrome handlebar clamps with embossed Goldwing emblem
Replaces OEM handlebar clamps with no modifications required
Adds a vintage touring aesthetic to your GL1100
Includes two clamps for a complete set
Durable construction for long-term use
Compatibility:Fits Honda Goldwing GL1100 models from 1980 to 1983.
🛒 Product Description
Enhance your Honda Goldwing GL1800's functionality and safety with the Add-On Adjustable Trunk Mirror (Part #1802). This accessory provides improved rear visibility, aiding in safer riding and maneuvering.
Key Features:
Enhanced Rear Visibility: Offers a clear view behind your motorcycle, improving safety during rides.
Adjustable Design: Allows for optimal positioning to suit individual rider preferences.
Durable Construction: Made from high-quality materials to withstand various weather conditions.
Easy Installation: Designed for straightforward installation without the need for extensive modifications.
Compatibility:
Honda Goldwing GL1800 models (2001–2017)
Note: Ensure compatibility with your specific model and year before purchase.
