This 5-piece custom lighting replacement lot consists of exactly the following components:
Street Glow 1156 LED Replacements: Exactly two (2) Street Glow Utilitarian Lighting series single-function bulbs (Model 1156). These features 19 ultra-bright red LEDs rated for over 100,000 hours of continuous operation, paired with a solid weather-sealed base plug.
Cytron LED Bulbs: Exactly three (3) Cytron Lighting Revolutionized Series high-visibility 4-LED dual amber light bulbs (Model AB1157-A / stock code 481075). Each features 4 focused forward-facing round projection LEDs encased in a reflective tower shell base housing.
Please note that this sale is strictly for exactly ONE (1) multi-item bundle containing 5 individual factory-sealed bulb packages as pictured.
COMPATIBILITY / FITMENT
Industry Standard Socket Base: Direct drop-in upgrade for any standard BA15s single-contact indexing configuration designated as a standard 1156 bulb type.
Harley-Davidson Applications: Perfect replacement option for early nose-cone fairing driving lamps, rear single-filament turn signal indicator bars, and standard auxiliary fender passing lamps using a 12V system architecture.
Powersports Applications: Ideal custom visibility upgrade for classic ATVs, metric cruisers, custom utility trailers, and street bikes looking to reduce electrical system stator draw while running high-efficiency LED elements.
Condition: New
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: street glow
Manufacturer Part Number: 1156
Country of Origin: United States
Source: Imported from active eBay listing 398317511577 for Shopify draft review.
Condition: New
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: street glow
Manufacturer Part Number: 1156
Country of Origin: United States
Fitment & Compatibility
Harley-Davidson Sportster Series: 1975–1983 Ironhead models (XL, XLH, XLCH, XLS)
Harley-Davidson Super Glide Series: 1975–1983 Shovelhead FX models (FX, FXE, FXEF, FXS Low Rider)
Harley-Davidson FXR Series: 1982–1983 Early Evolution FXR / FXRS platforms
Custom Applications: Fits any vintage custom bobber, chopper, or rigid project utilizing a stock 35mm triple tree setup.Missing Hardware Notice
Missing Bottom Fork Damper Tube Bolt: The separate left-side fork leg is currently missing the bottom Allen-head damper tube bolt component. Because this critical hardware piece is absent from the bottom of the lower slider, the inner chrome tube is not locked into place and can be fully pulled out of the lower leg. A replacement bottom bolt and crush washer setup must be sourced and installed to secure the internal assembly components properly.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Showa
Placement on Vehicle: Front
Country of Origin: United States
Source: Imported from active eBay listing 398305738546 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Showa
Placement on Vehicle: Front
Country of Origin: United States
COMPATIBILITY / FITMENT
Fuel Line Specifications: Fits any standard 1/4-inch Inside Diameter (ID) rubber or polyurethane motorcycle fuel lines.
Powersports Applications: Ideal direct upgrade for standard single or multi-carburetor setups across classic metric sport bikes, ATVs, UTVs, dirt bikes, and watercraft.
Custom Builds: Excellent compact layout choice for custom rigid hardtail choppers, lane splitters, or bobbers running tightly packed custom fuel tank configurations.
Condition: New
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: BikeMaster
Country of Origin: United States
Type: Fuel Filter
Features: Easy Installation
Manufacturer Part Number: 151796
Source: Imported from active eBay listing 398317511575 for Shopify draft review.
Condition: New
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: BikeMaster
Country of Origin: United States
Type: Fuel Filter
Features: Easy Installation
Manufacturer Part Number: 151796
When these legendary early 1980s 3-wheelers left the assembly line, they were designed without a factory battery, running entirely off an AC magneto circuit. Honda engineered this ultra-rare accessory kit as a complete factory-optional upgrade path so riders could convert their machine to a modern DC charging system. This allows your vehicle to house a standard 12-volt battery, maintain a constant charge, and cleanly power auxiliary electrical upgrades, aftermarket lighting, or standard accessories.
This all-inclusive master conversion package contains the core structural assemblies alongside every single specialized factory mounting clip, wire harness, and protective element required for a seamless installation:
Core Brand New Structural Assemblies & Protection
08615-9580002: Exactly one (1) brand-new heavy-duty factory black steel battery box container tray structure.
08615-9580003: Factory original steel battery box hold-down securing bracket strap units.
08615-9580004: High-efficiency 12V silicon voltage regulator charging rectifier unit.
08615-9580006: Protective upper battery cover strap holder mount plate.
08615-9580009: Factory original thick black foam protective vibration-damping battery box cushion liner.
Factory Terminal Boot: Genuine heavy-duty black weather-protective battery terminal shield cover shroud.
Factory Master Mounting Hardware & Wiring
08615-9580008: Factory original metal sealing washers.
08615-9580010: Protective sub-wiring loom harness conversion adapter layout.
08615-9580011: Factory black rubber anti-vibration frame mounting step-bushings (Pack of 4).
08615-9580012: High-strength mounting collars and specialized stepped spacer bolts.
The core structural steel battery tray is completely brand new and unmounted, featuring its original factory-applied black protective finish coat. The rest of the electrical components, specialized foam cushions, terminal boots, and mounting hardware components remain wrapped in their original anti-corrosion protective factory paper sleeves, and hermetically sealed inside the original genuine Honda Japanese-labeled plastic retail packaging layout.
This is a once-in-a-lifetime opportunity for a serious Honda 3-wheeler collector or restorer to find a complete, unbroken master factory conversion package down to the brand-new structural steel battery box, insulation pads, weather boots, specialized mounting collars, and frame rubber bushings.
Please note that this sale is strictly for the complete factory master accessory component lot exactly as pictured.
Section 3: COMPATIBILITY / FITMENT
Honda ATC 185: 1980 models
Honda ATC 185S: 1981–1983 models
Honda ATC 200: 1981–1983 base models
Application Note: This kit is designed for the hardtail utility platforms listed above. It is not historically correct for full-suspension models like the ATC200E Big Red or ATC200ES series, which arrived from the factory with standard battery boxes pre-installed.
Condition: New other (see details)
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Honda
Manufacturer Part Number: 08615-9580002
Country of Origin: United States
Source: Imported from active eBay listing 398317511569 for Shopify draft review.
Condition: New other (see details)
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Honda
Manufacturer Part Number: 08615-9580002
Country of Origin: United States
COMPATIBILITY / FITMENT
Suzuki Models: Direct factory replacement fitment for most 12-volt Suzuki street motorcycles, dual-sports, and cruisers built from 1984–1989 (including GS550, GS650, GS750, GS850, and DR200SE series). Replaces Suzuki OEM Reference Part # 38610-31310 or 38610-31X50.
Kawasaki Models: Cross-compatible fitment with numerous 12V classic Kawasaki motorcycle platforms built from the late 1970s through the 1980s. Replaces Kawasaki OEM Reference Part # 27002-1053. [1]
Custom Applications: Excellent compact universal application upgrade for custom rigid bobbers, vintage hardtail choppers, or custom trailers requiring a traditional 12V / 23W mechanical 2-prong flasher mechanism
Condition: New
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: EMGO
Country of Origin: United States
Manufacturer Part Number: 66-86752
Source: Imported from active eBay listing 398317511573 for Shopify draft review.
Condition: New
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: EMGO
Country of Origin: United States
Manufacturer Part Number: 66-86752
COMPATIBILITY / FITMENT
Honda Goldwing Series: 1984–1987 GL1200 / GL1200A Aspencade / GL1200I Interstate / GL1200SE-i models equipped with a factory rear tour box trunk assembly layout.
Custom Applications: Can be universal-fit retrofitted onto vintage custom rigid choppers, classic pull-behind motorcycle cargo trailers, or custom metric cruiser luggage boxes utilizing a 12V DC system architecture.
Condition: New
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Drag Specialties
Manufacturer Part Number: Goldwing
Country of Origin: United States
Placement on Vehicle: Rear
Source: Imported from active eBay listing 398317511560 for Shopify draft review.
Condition: New
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Drag Specialties
Manufacturer Part Number: Goldwing
Country of Origin: United States
Placement on Vehicle: Rear
Industry Standard Base: Direct factory replacement configuration for any automotive or powersports socket designated as an industry standard 881 bulb type.
Harley-Davidson Applications: Direct drop-in upgrade for specialized auxiliary passing lamps and custom aftermarket nose-fairing driving lights utilizing an 881 halogen base platform.
Powersports Applications: Ideal performance lighting swap for classic ATVs, side-by-sides (UTVs), snowmobiles, and metric cruiser fog lamp housings running a standard 12V DC electrical system.
Condition: New
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Vision
Country of Origin: United States
Manufacturer Part Number: 881
Source: Imported from active eBay listing 398317511559 for Shopify draft review.
Condition: New
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Vision
Country of Origin: United States
Manufacturer Part Number: 881
Fitment & Compatibility
Universal 12V Systems: Direct drop-in mechanical replacement for a wide variety of vintage 12-volt street motorcycles, dual-sports, mopeds, and ATVs requiring a standard 12V flasher relay.
Harley-Davidson Applications: Works perfectly for custom hardtail projects, bobbers, or vintage custom choppers utilizing basic, non-EFI 12V DC turn signal wiring paths.
Metric Cruiser & Scooter Fitment: Direct fitment for 1970s and 1980s classic Honda, Yamaha, Kawasaki, and Suzuki motorcycles running original incandescent indicator bulbs.
Condition: New
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Emgo
Country of Origin: United States
Manufacturer Part Number: 66-86712
Source: Imported from active eBay listing 398317511564 for Shopify draft review.
Condition: New
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Emgo
Country of Origin: United States
Manufacturer Part Number: 66-86712
Fitment & Compatibility
Custom Motorcycle Applications: Direct replacement option for custom vintage hardtail choppers, bobbers, and custom cruisers running early aftermarket nose-fairing headlight housings or custom bottom-mount spot assemblies.
Harley-Davidson Applications: Fits 12V DC custom builds designed to accept traditional incandescent or halogen replacement miniature driving bulbs popular in the 1980s and 1990s.
Condition: New
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Custom Chrome
Country of Origin: United States
Source: Imported from active eBay listing 398317511566 for Shopify draft review.
Condition: New
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Custom Chrome
Country of Origin: United States
Industry Standard Socket Base: Direct drop-in configuration replacement for any automotive, powersports, or scooter socket requiring a standard 12-volt single-contact 12V 18W bayonet bulb type.
Harley-Davidson Applications: Fits custom custom project configurations running single-contact small turn signal indicator bodies or custom auxiliary single-filament marker housings.
Universal Metric Cruiser, Scooter & ATV Fitment: Excellent direct factory replacement for vintage Honda, Yamaha, Kawasaki, and Suzuki turn signal housings, instrument gauges, and indicator lights running classic 12V DC electrical systems. Perfect for vintage Japanese and European moped or small-displacement scooter light sockets.
Condition: New
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Shinko
Country of Origin: United States
Manufacturer Part Number: FS13M048
Source: Imported from active eBay listing 398317511561 for Shopify draft review.
Condition: New
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Shinko
Country of Origin: United States
Manufacturer Part Number: FS13M048
Premium pair of factory OEM Harley-Davidson 41mm front fork outer slider lower legs, explicitly pulled from an FXDWG Dyna Wide Glide platform. Sourced out of a clean powersports dealer warehouse cache, these robust structural castings are precision-engineered to accommodate standard 41mm internal fork tubes and assembly hardware.
Features integrated structural fender mounting bosses, axle path openings, and factory caliper mounting tabs intact. Perfect replacement parts or core building blocks to replace scarred, pitted, or damaged front lower legs on a custom cruiser build.
Please note that this sale is strictly for exactly ONE (1) matching pair of standalone fork lower legs as described.
Section 3: DISCREPANCIES
Surface Condition: The slider surfaces exhibit minor superficial scuffs, light localized clear-coat weathering, and road debris pitting common to vintage road take-offs.
Section 4: COMPATIBILITY / FITMENT
Harley-Davidson FXDWG Dyna Wide Glide models (1993–2005)
Harley-Davidson Softail models using matching 41mm Wide Glide front ends (1984–2006 FXST, FXSTC, FXWG)
Fits broad Evolution Big Twin and Twin Cam 88 custom choppers built around 41mm assemblies
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Machine Type: Street Motorcycle
Items Included: Front Fork
Material: Aluminum
Vintage Part: No
Placement on Vehicle: Front, Lower
Brand: Harley-Davidson
Type: Fork Leg
Unit Type: Unit
Inside Diameter: 41 mm
Outside Diameter: 41 mm
Universal Fitment: No
Finish: Polished
Country of Origin: United States
Performance Part: No
Source: Imported from active eBay listing 398320767100 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Machine Type: Street Motorcycle
Items Included: Front Fork
Material: Aluminum
Vintage Part: No
Placement on Vehicle: Front, Lower
Brand: Harley-Davidson
Type: Fork Leg
Unit Type: Unit
Inside Diameter: 41 mm
Outside Diameter: 41 mm
Universal Fitment: No
Finish: Polished
Country of Origin: United States
Performance Part: No
Vintage BMW Motorcycles (R-Series models like R50/5, R60/5, R75/5, R80, R100, and K-Series like K75, K100)
Vintage Harley-Davidson models utilizing a 7-inch round headlight bucket (Road King FLHR, Fat Boy FLSTF)
European Classic Motorcycles (Moto Guzzi, Laverda, Ducati, and Triumph variants)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Type: Headlight Assembly
Bulb Shape Code: H4
Brand: Bosch
Country of Origin: United States
Source: Imported from active eBay listing 398320767103 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Type: Headlight Assembly
Bulb Shape Code: H4
Brand: Bosch
Country of Origin: United States
Original genuine factory OEM Harley-Davidson 41mm front fork outer lower slider leg, precision-cast by Showa Japan. Sourced out of a clean powersports dealer warehouse cache, this heavy-duty aluminum slider features integrated dual-bolt mounting bosses designed specifically to hold the front brake caliper on the right side of Wide Glide assemblies.
The casting remains completely structurally sound with clean internal machining, crisp axle path alignments, and secure fender mount eyes. Perfect direct replacement for a pitted, scarred, or crash-damaged lower slider leg on a vintage cruiser or custom chopper project.
Please note that this sale is strictly for exactly ONE (1) single individual standalone right-side fork slider leg as pictured.
DISCREPANCIES
Surface Deterioration: The polished aluminum finish exhibits noticeable clear-coat flaking, heavy localized oxidation weathering, road debris pitting, and scuffing from storage. Will require buffing or polishing to restore a high-gloss look.
COMPATIBILITY / FITMENT
Harley-Davidson Dyna Wide Glide FXDWG models (1993–1999)
Harley-Davidson Softail Custom FXSTC, Standard FXST, and Night Train FXSTB models (1984–1999)
Fits broad Evolution Big Twin 41mm Wide Glide front ends using single-disc right-side brake caliper setups.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Showa
Country of Origin: United States
Source: Imported from active eBay listing 398349226518 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Showa
Country of Origin: United States
Premium custom Corbin Young Guns series low-profile motorcycle saddle specifically designed for Evolution-era Harley-Davidson Softail platforms. This striking seat features an authentic tan leather seating surface accented with a premium textured ostrich-patterned print profile.Engineered with Corbin's legendary dense comfort foam cell technology and a rigid, fiberglass-reinforced base pan layout to deliver ergonomic spine support and a streamlined custom look. Includes the necessary specialized low-profile rear fender mounting tongue bracket and structural frame-alignment hardware pins.
Please note that this sale is strictly for exactly ONE (1) custom standalone leather motorcycle seat with included mounting hardware as described.
Section 3: DISCREPANCIES
Surface Patina: The tan ostrich leather exhibits gorgeous natural surface variations, mild color shading transitions, and localized character wear common to premium dyed vintage leather goods.
Base Pan Scuffs: The bottom side of the structural base plate pan shows minor superficial scratching and light perimeter rubber bumper scuffs from frame contact.
Section 4: COMPATIBILITY / FITMENT
Harley-Davidson Evolution Softail models (1984–1999 FXST, FLST, FLSTC, FLSTF, and FXSTS platforms)
Fits broad 4-speed and 5-speed Evolution Big Twin Softail standard-width rigid-mount frames
Does not fit 2000-up Twin Cam series Softail frames due to factory tank and fender configuration variances.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Corbin
Seat Type: Solo Seat
Material: Leather
Country of Origin: United States
Source: Imported from active eBay listing 398335561390 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Corbin
Seat Type: Solo Seat
Material: Leather
Country of Origin: United States
Premium genuine factory OEM Harley-Davidson 68-inch mechanical clutch cable assembly, explicitly pulled from a 2013 FLHX Street Glide platform. Sourced out of a clean powersports dealer warehouse cache, this complete cable features the original black vinyl outer housing jacket, protective corrugated rubber boot wrap, integrated inline mid-cable adjuster assembly, and the factory transmission-side threaded end fitting with a smooth inner eyelet lead.
The interior steel core cable glides smoothly across the outer sheath without fraying or binding up. Perfect direct replacement part to restore smooth clutch lever engagement or refresh a worn, stretched, or melted line.
Please note that this sale is strictly for exactly ONE (1) standalone mechanical clutch cable assembly as pictured.
DISCREPANCIES
Surface Scuffs: The outer vinyl casing, inline hex adjuster nuts, and rubber accordion boot exhibit minor cosmetic warehouse shelf dust, light handling smudges, and minor age storage film.
COMPATIBILITY / FITMENT
Harley-Davidson Street Glide FLHX / FLHXI (2008–2013 platforms)
Harley-Davidson Electra Glide, Road King, and Road Glide models (2008–2013 6-speed Touring platforms)
Fits strictly 6-speed Touring models configured with the stock handlebar height and layout setup.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398349226517 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
Genuine factory OEM Harley-Davidson electronic turn signal module (TSM) / flasher automatic canceller unit sourced from a vintage powersports dealer cache. This authentic module features an explicit 8-pin terminal diagram molded directly into the tan composite plastic face pan housing, with a crisp factory barcode sticker reading part number 68441-00.
Engineered with built-in speed sensor integration, this component handles reliable right and left turn signal routing, self-canceling vehicle timing, and standard running lamp power delivery across classic carbureted and fuel-injected platforms. The structural multi-lock plugin block features complete, unbroken retention tabs and raw copper terminal pins free of internal folding or bridge oxidation.
Please note that this sale is strictly for exactly ONE (1) individual standalone replacement module assembly as pictured.
Section 3: DISCREPANCIES
Surface Scuffs: The outer tan plastic casing displays minor cosmetic shelf scuffs, localized fingerprint smudges, and light storage dust layer wear from decades of warehouse cache handling.
Section 4: COMPATIBILITY / FITMENT
Harley-Davidson Softail models (2000–2003 FLST / FXST platforms)
Harley-Davidson Dyna Glide and Sportster XL models (2000–2003)
Harley-Davidson Touring Electra Glide, Road King, and Road Glide models (2000–2003)
Fits broad early Twin Cam 88 and late Evolution wiring setups utilizing the standard 8-pin rectangular multi-plug harness connector configuration.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398342237892 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
Premium genuine factory OEM Honda sportbike rear hydraulic braking system assembly, explicitly pulled from a CBR929RR Fireblade platform. Sourced out of an organized powersports dealer warehouse cache, this complete unified setup features the high-performance Nissin cast sliding rear brake caliper, matching Nissin rear brake master cylinder with integrated pushrod eyelet, the flexible OEM fluid delivery hoses, brake line frame mounting clips, and the remote translucent amber plastic rear fluid reservoir tank block.
The internal hydraulic piston tracking paths are intact with solid bleeder screws and crisp structural line-bolt threads. Offering this as a complete pre-routed assembly significantly cuts diagnostic setup labor—perfect for a fast repair overhaul or a custom project build swap.
Please note that this sale is strictly for exactly ONE (1) complete multi-component integrated rear brake hydraulic assembly package as pictured. (Note: The vintage inventory tag notes "front brake", but the physical unit design is explicitly the rear caliper and pushrod master cylinder layout).
Section 3: DISCREPANCIES
Brake Pads: Used brake pads are included inside the caliper housing but are of unknown mileage wear status and should be inspected or replaced before road usage.
Surface Scuffs: The master cylinder assembly casting body, mounting ears, and outer rubber brake lines display minor cosmetic warehouse shelf dust, localized storage smudges, and light finish wear.
COMPATIBILITY / FITMENT
Honda CBR929RR Fireblade (2000–2001)
May adapt to select Honda CBR954RR or custom sportbike builds utilizing standard Nissin rear frame mounting hole spacing patterns
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Honda
Country of Origin: United States
Source: Imported from active eBay listing 398349226522 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Honda
Country of Origin: United States
Premium full complete factory OEM Harley-Davidson main vehicle wiring harness assembly explicitly configured for fuel-injected (EFI) Softail platforms. Sourced directly out of a classic powersports dealer warehouse cache, this comprehensive wiring layout is clean, un-spliced, and ready to install.
The harness comes completely equipped with its integrated frame mounting bracket, intact battery fuse block terminal box tray, multi-pin electronic control module (ECM) plug interface shroud, and complete branching accessory sub-leads. All factory weather-sealed deutsch terminal pin blocks, injector leads, and multi-lock connection nodes are completely intact with clean wire sheath protection runs free of modifications or cut sections.
Please note that this sale is strictly for exactly ONE (1) multi-branch complete main chassis wiring harness assembly package as pictured.
Section 3: DISCREPANCIES
Surface Dust: The exterior plastic corrugated wire looms and wrapped vinyl tape lines display minor cosmetic warehouse shelf dust, localized grease smudges, and standard age film from storage.
Mounting Scuffs: The central rigid black structural compound bracket tray features mild superficial scraping along its frame-rail contact tabs.
Section 4: COMPATIBILITY / FITMENT
Harley-Davidson Heritage Softail Classic EFI FLSTC / FLSTCI (2001–2005)
Harley-Davidson Fat Boy EFI FLSTF / FLSTFI (2001–2005)
Harley-Davidson Night Train, Softail Standard, and Springer EFI platforms (2001–2005 FXST / FLST)
Fits early Twin Cam 88 fuel-injected Delphi systems.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398342237890 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
Premium genuine factory OEM Harley-Davidson multi-branch front dual-disc hydraulic brake line assembly, explicitly pulled from a 2013 FLHX Street Glide platform. Sourced out of a clean powersports dealer warehouse cache, this complete layout features the original upper master cylinder junction line, integrated split-block manifold, and dual lower caliper fluid delivery loops.
Engineered with factory steel hardline segments and flexible heavy-duty reinforced rubber shielding layers to maximize system line pressure. The banjo eyelet connections and matching mounting block brackets are completely solid, offering a perfect direct swap to replace sun-baked, dry-rotted, or leaking front brake lines.
Please note that this sale is strictly for exactly ONE (1) integrated multi-branch front brake line assembly as pictured.
Section 3: DISCREPANCIES
Surface Scuffs: The outer rubber line casings and metal banjo unions exhibit minor cosmetic warehouse shelf dust, light handling smudges, and minor age storage film.
COMPATIBILITY / FITMENT
Harley-Davidson Street Glide FLHX / FLHXI (2008–2013 models without ABS)
Harley-Davidson Electra Glide, Road King, and Road Glide models (2008–2013 dual-disc non-ABS platforms)
Fits strictly non-ABS Touring models utilizing the factory handlebar height configuration setup.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398349226516 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
Bulk swap meet clear-out lot containing a total of five (5) individual fiberglass and composite plastic batwing fairing components matching Harley-Davidson Touring platforms. Sourced directly from a vintage powersports dealer cache, this multi-item collection includes four (4) outer fairing shells in varying colors and conditions, plus one (1) black inner stereo/gauge fairing structure.
The collection includes a diverse mix of styles, highlighted by a large late-model glossy black outer shell featuring a pre-installed headlight mounting bucket ring, a classic brown outer shell complete with its original dual steel inner mounting brackets, and a gloss black inner dash fairing featuring molded 4-hole speaker cutouts and a central radio compartment opening. This bulk assortment serves as a goldmine for custom audio builders, chopper mechanics looking for project shells, or swap meet vendors looking to restock.
Please note that this sale is strictly for exactly ONE (1) multi-piece lot containing the FIVE (5) individual fairing components as pictured.
Section 3: DISCREPANCIES
Orange Outer Shell: Features a distinct structural crack and fiberglass fracturing localized at the bottom inner curve of the headlight opening cutout, requiring bodywork or patch repair.
Brown Outer Shell: Exhibits a localized fiberglass punch-through repair hole on the lower left mounting area where the mounting stud hardware sits.
General Cosmetic Wear: Every single shell displays varying degrees of scuffs, deep hairline paint scratches, road debris weathering, clear-coat dulling, and storage dust from long-term warehouse cache exposure.
Section 4: COMPATIBILITY / FITMENT
Harley-Davidson Electra Glide, Street Glide, and Ultra Classic platforms (1996–2013 FLHX, FLHT, FLHTC, FLHTCU models)
Broad application for custom touring baggage projects, aftermarket cruiser fairing conversions, and custom audio mock-ups.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398356796720 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
Original genuine factory OEM vintage British motorcycle steel front fender assembly with integrated mounting hardware. Sourced from a classic powersports dealer cache, this is a highly collectible factory component explicitly pulled from a 1970 Triumph TR25W Trophy 250 (also sharing structural designs with corresponding BSA B25 Starfire unit singles).
Features its original weathered factory green paint scheme, complete with the center bridge bracket, outer mounting hoops, and rear fender stabilization stays. The base metal geometry remains solid without major structurally crushing dents or blown-through holes. Perfect old-school survivor piece for a vintage barn-find restoration, classic British custom bobber, or survival chopper build demanding authentic period-correct character.
Please note that this sale is strictly for exactly ONE (1) vintage front fender with mounting stays as pictured.
Section 3: DISCREPANCIES
Heavy Corrosion & Rust: The raw steel mounting stays and perimeter bridge frame loops exhibit significant rust scaling, deep surface oxidation, and finish deterioration throughout.
Finish Patina: The green paint coating shows extensive weathering, localized flaking, scratches, and storage scuffs from decades of warehouse cache exposure.
Section 4: COMPATIBILITY / FITMENT
Triumph TR25W Trophy 250 models (1968–1970)
BSA B25 Starfire / Fleetstar 250cc unit singles (1968–1970)
Fits broad late-1960s British lightweight singles utilizing factory part number reference 97-1674.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Triumph
Country of Origin: United States
Source: Imported from active eBay listing 398356795586 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Triumph
Country of Origin: United States
Genuine factory OEM Harley-Davidson ignition control module (ICM/CDI) sourced from a vintage powersports dealer cache. This original black composite electronic module features the factory barcode sticker prominently stamped with part number base 32568-00. It provides reliable, precise timing signals calibrated specifically for early carbureted Twin Cam 88 powertrains.
The housing structure is completely solid with intact dual-bolt mounting ears and clean electrical plug receptor pins free of corrosion. It is an ideal drop-in replacement to solve intermittent spark drop or ignition failure.
Please note that this sale is strictly for exactly ONE (1) individual standalone ignition control module assembly as pictured.
Section 3: DISCREPANCIES
Cosmetic Wear: The outer composite casing shows very minor superficial shelf wear scuffs from storage.
Label Condition: The factory identification barcode sticker shows minor localized fading along the top border but remains fully readable.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398335756525 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
Premium Shinko Tour Master Tire: Fitted with a robust Shinko Tour Master 150/90-15 M/C 74V tubeless rear tire. The rubber is in great condition, fairly new, showing deep tread depth lines and clean sidewalls free of cracking or dry rot.
Complete Axle Hardware: Includes the original rear axle bolt with the tightening hex nut and washer layout as pictured.
Pre-Greased Bearings: Wheel bearings have been thoroughly inspected and greased very well. They spin smoothly with zero gritty rotation or side-to-side play.
Super Clean Aluminum Rim: The metal face is exceptionally clean, completely straight, unbent, and free of heavy curb rash, deep corrosion paths, or tire iron gouges.
Condition: Beautiful used take-off condition. Cleaned up, fully functional, and ready to install on your machine or chopper project immediately.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Yamaha
Country of Origin: United States
Source: Imported from active eBay listing 398332370050 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Yamaha
Country of Origin: United States
Premium full complete factory OEM Harley-Davidson rider floorboard and full rear hydraulic brake control kit package, pulled from a classic Twin Cam Softail platform. Sourced out of a clean powersports dealer warehouse cache, this comprehensive assembly contains the matching left and right floorboard mounts completely loaded with upgraded custom comfort rubber-isolated floorboard pan inserts.
This massive system bundle includes the genuine chrome kickstand arm assembly with its tension spring, all correct frame floorboard hardware bolts, an OEM brake lever pedal arm, and a dual-lever heel-toe foot shifter setup.
To provide a complete mechanical layout, the kit features the full hydraulic rear braking setup: the main rear master cylinder assembly fluid reservoir, a flexible rear brake line with an integrated inline pressure brake stoplight sensor switch, and the matching genuine factory OEM Harley-Davidson rear brake caliper. This is a complete, unseparated operational takeoff unit designed to refresh your foot controls and braking system all at once.
Please note that this sale is strictly for exactly ONE (1) multi-component complete rider floorboard, foot control, master cylinder, line, and rear caliper kit package as pictured.
Section 3: DISCREPANCIES
Surface Condition: The structural black powder-coated brackets, mounting nodes, and chrome levers display typical minor cosmetic warehouse handling dust, localized grease smudges, and light storage scuffs.
Caliper & Seals: The hydraulic rear brake caliper and master cylinder contain older residual brake fluid from removal and should be thoroughly flushed, cleaned, and bench-tested before road installation.
Section 4: COMPATIBILITY / FITMENT
Harley-Davidson Heritage Softail Classic FLSTC / FLSTCI models (2000–2006)
Harley-Davidson Fat Boy FLSTF / FLSTFI models (2000–2006)
Fits broad Twin Cam 88 Softail rigid-mount floorboard chassis configurations from 2000 to 2006.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Type: Master Cylinder
Port Quantity: 1
Machine Type: Street Motorcycle
Items Included: Master Cylinder Cap
Material: Aluminum
Universal Fitment: No
Vintage Part: No
Country of Origin: United States
Source: Imported from active eBay listing 398360707464 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Type: Master Cylinder
Port Quantity: 1
Machine Type: Street Motorcycle
Items Included: Master Cylinder Cap
Material: Aluminum
Universal Fitment: No
Vintage Part: No
Country of Origin: United States
