1985-1987 Honda Fourtrax 250 (TRX250 / TRX250A 2x4 Utility Models)
Honda OEM Genuine Part Numbers Cross-Reference: 17613-VM5-000 (Gas Tank Cap Shroud Rubber Ring / Panel Collar), 95701-08016-00 (Flange Mounting Bolts Set)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Honda
Country of Origin: United States
Source: Imported from active eBay listing 398233110368 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Honda
Country of Origin: United States
1985-1987 Honda Fourtrax 250 (TRX250 / TRX250A 2x4 Utility Models)
Honda OEM Genuine Part Numbers Cross-Reference: 81300-HA8-680 (Rear Carrier Cargo Rack Frame), 33700-HA8-681 (Taillight Assembly Set), 81320-HA8-680 (Rear Carrier Under-Mount Bracket)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Honda
Country of Origin: United States
Source: Imported from active eBay listing 398233110366 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Honda
Country of Origin: United States
1985-1987 Honda Fourtrax 250 TRX250 OEM Front Seat Bracket Mount Cushions Bolts
1985-1987 Honda Fourtrax 250 (TRX250 / TRX250A 2x4 Utility Models)Honda OEM Genuine Part Numbers Cross-Reference: 50240-HA8-000 (Front Seat Mount Bracket Bridge), 77207-HA0-000 (Seat Mounting Rubber Cushions)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Honda
Country of Origin: United States
Source: Imported from active eBay listing 398233110372 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Honda
Country of Origin: United States
1985-1987 Honda Fourtrax 250 (TRX250 / TRX250A 2x4 Utility Models)
1985-1987 Honda Big Red 250 (ATC250ES / ATC250SX Three-Wheeler Cross-Fitments)
Honda OEM Genuine Part Numbers Cross-Reference: 53205-HA8-000 / 61311-HA8-680 (Handlebar Shroud Dash Cushion Cover), 35100-HA8-680 / 35100-HA8-682 (Combination Ignition Switch Assy)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Honda
Manufacturer Part Number: Fourtrax
Country of Origin: United States
Source: Imported from active eBay listing 398233110365 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Honda
Manufacturer Part Number: Fourtrax
Country of Origin: United States
2016-2022 Can-Am Outlander 570 (XMR / DPS / XT / Hunting Edition Gen2 4x4 Models)
2015-2022 Can-Am Outlander 450 / 500 / 650 / 850 / 1000 (Gen2 Chassis Architectures)
2015-2022 Can-Am Renegade 570 / 650 / 850 / 1000
Can-Am BRP Genuine OEM Part Numbers Cross-Reference: 705600862 / 703500968 (Front Left Hand Caliper Assy), 705600861 / 703500967 (Front Right Hand Caliper Assy)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Cam am
Country of Origin: United States
Source: Imported from active eBay listing 398236810836 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Cam am
Country of Origin: United States
2016-2022 Can-Am Outlander 570 (XMR / DPS / XT Gen2 4x4 Models)
2012-2022 Can-Am Outlander 450 / 500 / 650 / 800 / 850 / 1000 (Gen2 Chassis Footprints)
2012-2022 Can-Am Renegade 500 / 570 / 650 / 800 / 850 / 1000
Can-Am BRP Genuine OEM Part Numbers Cross-Reference: 705601274 (Right Hand Brake Pedal), 705601273 / 705600847 (Rear Master Cylinder), 705601020 (Fluid Reservoir Oil Tank), 705600994 (Splitter Block)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Can AM
Country of Origin: United States
Source: Imported from active eBay listing 398236810838 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Can AM
Country of Origin: United States
2016-2022 Can-Am Outlander 570 (XMR / DPS / XT Gen2 4x4 Models)
2015-2022 Can-Am Outlander 450 / 650 / 850 / 1000 (Gen2 Chassis Architecture Fitments)
2015-2022 Can-Am Renegade 570 / 650 / 850 / 1000
Can-Am BRP Genuine OEM Part Numbers Cross-Reference: 705401593, 705401111 (Front Right Hand Steering Knuckle Spindle Assembly)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Can Am
Country of Origin: United States
Source: Imported from active eBay listing 398243705334 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Can Am
Country of Origin: United States
2016-2022 Can-Am Outlander 570 (XMR / DPS / XT Gen2 4x4 Models)
2012-2022 Can-Am Outlander 450 / 500 / 650 / 800 / 850 / 1000 (Gen2 Chassis Footprints)
2012-2022 Can-Am Renegade 500 / 570 / 650 / 800 / 850 / 1000
Can-Am BRP Genuine OEM Part Numbers Cross-Reference: 705600859, 703500969, 705602190 (Rear Right Hand Brake Caliper Assembly)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: can am
Manufacturer Part Number: Outlander 570
Country of Origin: United States
Source: Imported from active eBay listing 398236810839 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: can am
Manufacturer Part Number: Outlander 570
Country of Origin: United States
NOT INCLUDED:FRAME/TRANSMISSION/EXHUAST/TANK/CABLESS&S Oil pumplogged fewer than 6,000 total operational miles since completion.The external raw aluminum casing and rocker boxes exhibit standard cosmetic operational staining, minor surface oxidation, and light oil film deposits typical of a clean, vintage cruiser donor machine core.The motor is sold with all internal rotating assemblies, oil lines, and pushrod tubes intact as shown.The internal engine oil has been completely drained for safe freight transport; refilling the crankcase with fresh high-quality V-Twin lubricant is strictly required before final deployment.1982 Harley-Davidson FXS Low Rider (Direct Factory Application Match)
1977-1982 Harley-Davidson Shovelhead Big Twin Models (FX, FXE, FL, FLH)
Custom Chopper / Bobber / Rigid Frame Applications (Utilizing standard Big Twin engine mounts)
Technical Component Cross-Reference: 1200cc / 74ci Displacement Platform, VIN Stamped Code 2F-9562982, Fits standard 4-speed transmission inner primary configurations\
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Engine Type: 4-Stroke
Country of Origin: United States
Source: Imported from active eBay listing 398251395737 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Engine Type: 4-Stroke
Country of Origin: United States
2016-2022 Can-Am Outlander 570 (XMR / DPS / XT Gen2 V-Twin Models)
2017-2022 Can-Am Outlander 450 (Shares identical handlebar thumb control assembly footprints)
Can-Am BRP Genuine OEM Part Numbers Cross-Reference: 420889133, 420889134 (EFI Throttle Body Assembly), 707002465 / 707002960 (Electronic Thumb Throttle Lever Housing), 707000985 (Throttle Cable Track)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Can Am
Country of Origin: United States
Source: Imported from active eBay listing 398243705332 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Can Am
Country of Origin: United States
2016-2022 Can-Am Outlander 570 (XMR / DPS / XT Gen2 4x4 Models)
2015-2022 Can-Am Outlander 450 / 650 / 850 / 1000 (Gen2 Chassis Architecture Fitments)
2015-2022 Can-Am Renegade 570 / 650 / 850 / 1000
Can-Am BRP Genuine OEM Part Numbers Cross-Reference: 705401594, 705401112 (Front Left Hand Steering Knuckle Spindle Assembly)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Can Am
Country of Origin: United States
Source: Imported from active eBay listing 398243705333 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Can Am
Country of Origin: United States
1970-1983 Harley-Davidson Shovelhead Electra Glide / Super Glide (FL / FLH / FX / FXE 1200cc & 1340cc Models)
1965 Harley-Davidson Panhead Electra Glide FL / FLH (Verify starter housing clearance metrics)
1974-1985 Harley-Davidson Sportster Ironhead 1000cc Models (XLH / XLS / XLX-61)
Harley-Davidson / Prestolite Genuine OEM Part Numbers Cross-Reference: 31458-66A, 31458-66B, 31458-66C, 31458-66TA (Harley Factory ID Series), P-66A / MGL4004 (Prestolite Production Block Numbers)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398276070148 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
1979-1981 Harley-Davidson Sportster 1000 Standard / Deluxe / Hugger (XLH1000 / XLCH1000)
1979-1981 Harley-Davidson XLS Roadster (Matching era 4-speed frame layouts)
Custom Ironhead Chopper, Bobber, or rigid project builds utilizing late-vintage 1979–1981 chassis architectures
Harley-Davidson Genuine OEM Factory Part Numbers Cross-Reference: 34872-79 / 34870-79 (Chrome Outer Transmission Sprocket & Gear Cover Assembly Series)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Manufacturer Part Number: 34870-79
Country of Origin: United States
Source: Imported from active eBay listing 398276070145 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Manufacturer Part Number: 34870-79
Country of Origin: United States
The exterior housings exhibit light cosmetic scuffs, typical minor raw metallic oxidation, and localized grease film accumulations from regular mock-up or field cruiser service.
The internal oil has been fully drained for safe freight transport; refilling the gearcase with fresh high-quality transmission lubricant is strictly required before final trail or road operation.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Manufacturer Part Number: 5-into-4 Custom
Country of Origin: United States
Source: Imported from active eBay listing 398251395738 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Manufacturer Part Number: 5-into-4 Custom
Country of Origin: United States
1999-2017 Harley-Davidson Dyna Glide Models (FXD, FXDL, FXDB, FXDC, FXDWG)
2000-2017 Harley-Davidson Softail Models (FLSTF Fat Boy, FLSTC Heritage, FXST Standard, FXSTB)
1999-2016 Harley-Davidson Touring Models (Road King, Electra Glide, Street Glide, Road Glide, FLHR, FLHT, FLHX)
Harley-Davidson Genuine OEM Factory Part Numbers Cross-Reference: 25243-99 / 25243-99A / 25244-99 (Satin Silver Right Hand Engine Cam Timing Chest Shroud Cover Core)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398276070144 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
2004-2022 Harley-Davidson Sportster 1200 Custom / Iron / Forty-Eight (XL1200C / XL1200NS / XL1200X / XL1200V Seventy-Two)
2004-2022 Harley-Davidson Sportster 883 Iron / Low / SuperLow (XL883N / XL883L / XLH883 / Standard)
Harley-Davidson Genuine OEM Factory Part Numbers Cross-Reference: 34910-04 / 34910-04A / 34943-05 (Satin Silver Right Engine Transmission Sprocket Cover Shroud Core)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Manufacturer Part Number: 34910-04
Country of Origin: United States
Source: Imported from active eBay listing 398276070142 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Manufacturer Part Number: 34910-04
Country of Origin: United States
These wheels are structurally sound and straight, removed from a high-end custom chopper mock-up project. As shown in the photos, there is minor to moderate surface pitting, hazing, and oxidation on the chrome and polished aluminum surfaces from long-term storage. There are no deep gouges, bends, or structural cracks. Because this is high-quality billet aluminum, a professional polish or time with a high-speed buffing wheel will easily clean these surfaces up to a brilliant mirror shine. The tires show dry rotting and are included primarily to protect the rims during transport; replacement before extensive road use is recommended.High-end custom chopper, bobber, or pro-street custom builds utilizing wide swingarm rear configurations.
Direct fitment for custom 1990s-2000s era custom V-Twin frameworks (such as West Coast Choppers, Jesse James, Bourget, or custom Harley-Davidson Softail/FXST platforms built for wide tires).
Front Wheel Specifications: 21" x 2.15" rim size, dual-disc hub.
Rear Wheel Specifications: 18" x 5.5" rim size (ideal for 180mm to 200mm rear tire builds).
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Type: Rim
Finish: Machined
Brand: Integrity machine
Manufacturer Part Number: Dyna Wide Glide
Wheel Diameter: 21
Wheel Width: 2.15
Country of Origin: United States
Source: Imported from active eBay listing 398286121787 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Type: Rim
Finish: Machined
Brand: Integrity machine
Manufacturer Part Number: Dyna Wide Glide
Wheel Diameter: 21
Wheel Width: 2.15
Country of Origin: United States
Fitment & Compatibility
Fits 1966–1984 Harley-Davidson Shovelhead 74" and 80" Big Twin engines.
Fits standard swingarm frames, rigid chopper frames, and custom bobber setups running Shovelhead cylinder heads.
Accommodates both stock flanged or three-hole exhaust port configurations depending on your specific head setup.
Item Description
Authentic vintage custom chopper drag pipe dual exhaust system kit.
Features a matching pair of steel pipes styled with an aggressive sweep and classic raw, unpolished black finish along the upper layout.
Lower exhaust tube sections come pre-wrapped in heavy-duty textured gray thermal exhaust heat wrap secured tightly by adjustable hose clamp bands.
Includes the essential vintage stamped steel dual-clamp frame exhaust hanger mounting bracket and correct fastening lock nut hardware.
Structural steel tubing remains entirely solid without crushed segments, deep dents, blowout holes, or compromised exhaust port seals.
Shows honest operational surface weathering, minor surface oxidation spots, and typical wrap discoloration from classic motorcycle use.
Great restoration core set or drop-in swap meet assembly for custom garage builds, vintage bobbers, and custom period-correct choppers.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Items Included: Pipe
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398298066381 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Items Included: Pipe
Brand: Harley-Davidson
Country of Origin: United States
Harley Softail Custom Yellow Bobber Rear Fender Chrome Struts Tail Light Harness
Condition Notes:This is an authentic vintage custom builder piece in used, weathered condition. The yellow paint finish exhibits a few surface scratches, edge chips, and minor blemishes from warehouse handling and road use. The chrome plating on the side fender rails shows some light weathering, oxidation spots, and superficial surface scratching. Structurally, the metal framework is entirely solid, straight, and crack-free—making it an excellent bolt-on assembly for a custom builder look, a retro chopper project, or an easy candidate to scuff and respray to match your bike's paint scheme.
COMPATIBILITY / FITMENT
Harley-Davidson Softail Models (1984–2005 FXST / FLST Custom Generations)
Custom Choppers, Bobbers, and Rigid frames designed around standard width Softail rear tires
Included Components: Custom Molded Rear Fender Shell, Left and Right Chrome Strut Rails, Integrated Tail/Brake Light Housing, Triangular License Plate Bracket, Complete Wiring Harness Loom, Four (4) Mounting Fasteners
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398283222769 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
This set is in functional builder condition and is priced according to its specific cosmetic and structural defects. One shock absorber is structurally fully intact with the original Progressive Suspension brand decal. The other shock absorber suffered a common failure where the internal spring retaining clip would no longer seat correctly. To permanently resolve this, it was heavily and securely welded around the base plate interface. It has been run like this for approximately 8 years with zero mechanical or performance issues, and it rides perfectly straight and normal. Both shocks show typical weathering, chrome oxidation, and minor scuffs from road use but possess healthy damping properties.
Harley-Davidson Dyna Glide Models 1991 to 2017 (including FXDWG Wide Glide, FXDL Low Rider, FXDB Street Bob, and FXDC Super Glide)
Direct fitment for custom chopper, bobber, or swingarm builds designed around a 11" to 12" center-to-center Dyna eyelet configuration
Included Components: Two (2) Covered Shocks, Two (2) Upper Shoulder Mounting Bolts, Two (2) Lower Mounting Bolts, Retaining Washers
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Progressive Suspension
Country of Origin: United States
Source: Imported from active eBay listing 398286121789 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Progressive Suspension
Country of Origin: United States
Fitment & Compatibility
Harley-Davidson
Fits multiple heavy-frame Touring models across the compatible model years.
Commonly utilized across classic Road King, Street Glide, Electra Glide, and Road Glide builds.
Note: Buyers are entirely responsible for cross-referencing precise factory lengths, diameters, and brake-caliper mounting configurations prior to purchase.
Condition Report
Sourced from an authentic dealer parts stash.
The outer slider leg and inner chrome tubes display structural integrity with no signs of impact or bends.
Shows a natural, authentic finish with minor cosmetic age, warehouse shelf wear, and small surface scuffs from handling.
As with all vintage or warehouse-stored suspension units, replacing the internal fork seals and fresh fluid is highly recommended before final bike installation.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398305738548 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
This specific 3-piece mixed installer lot consists of the following components:
PIAA 1156 Single-Contact Bulbs: Exactly two (2) individual single-filament 1156 miniature bulbs (12V 27W). These feature a standard BA15s single-contact indexing base plate, ideal for auxiliary passing lamps, spot driving bars, or directional rear turn indicator assemblies.
PIAA 1157 Dual-Contact Bulb: Exactly one (1) individual dual-filament 1157 miniature bulb (12V 27/8W). This features a standard BAY15d dual-contact offset-pin base plate setup, engineered explicitly to function as a combined rear running taillight and primary brake stop or front turn signal setup.
Please note that this sale is strictly for exactly ONE (1) multi-pack job lot containing a total of 3 individual factory-sealed bulb packages as pictured.
Fitment & Compatibility
1156 Single Filament Bases: Direct drop-in upgrade option for any motorcycle, ATV, or cruiser auxiliary housing requiring a standard single-contact 1156 miniature bayonet style bulb.
1157 Dual Filament Bases: Direct drop-in configuration for standard combination taillight/brake light assemblies or dual-circuit front indicator marker housings requiring a standard dual-contact offset 1157 bulb type.
Harley-Davidson Applications: Direct premium upgrade for classic factory turn signal bars, lower rear fender tip running lights, and front passing lamp spotlights running a standard 12V DC chassis electrical system.
Condition: New
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: PIAA
Manufacturer Part Number: 1156
Country of Origin: United States
Source: Imported from active eBay listing 398317511583 for Shopify draft review.
Condition: New
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: PIAA
Manufacturer Part Number: 1156
Country of Origin: United States
🛠️ Fitment & Compatibility Guide
Direct factory replacement for the right (throttle) side of the front suspension.
1981 Yamaha XJ550 Seca
1982 Yamaha XJ550 Seca
1983 Yamaha XJ550 Seca
📝 Item Description
Up for sale is a factory OEM right-hand side front fork assembly removed from a vintage Yamaha XJ550 Seca. This unit features the lower aluminum slider and the inner chrome fork tube.
Included Components:
OEM Lower Aluminum Slider Leg
Inner Chrome Fork Tube
Caliper Mounting Bosses & Axle Mount (Right Side)
Internal Springs & Dampening Components (Fully assembled)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Yamaha
Country of Origin: United States
Source: Imported from active eBay listing 398305738551 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Yamaha
Country of Origin: United States
Fitment & Compatibility
Factory OEM Style Reference: Designed to replicate classic Harley-Davidson factory styling accents (Cross-references with vintage factory FL fender profiles).
Harley-Davidson FL Series: 1954–1965 Panhead and early Shovelhead FL / FLH 4-speed models equipped with deep, wrap-around full-coverage front fenders.
Harley-Davidson Heritage Softail: 1986–1999 Evolution FLST / FLSTC / FLSTN models running classic wide front sheet metal.
Custom Applications: Fits a wide variety of vintage custom touring cruisers, retro trike projects, or custom pull-behind trailers running heavy-gauge steel front fenders.
Condition: New
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Mid USA
Machine Type: Street Motorcycle
Manufacturer Part Number: 22940
Material: Chrome
Vintage Part: Yes
Placement on Vehicle: Front
Country of Origin: United States
Performance Part: No
Source: Imported from active eBay listing 398317511586 for Shopify draft review.
Condition: New
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Mid USA
Machine Type: Street Motorcycle
Manufacturer Part Number: 22940
Material: Chrome
Vintage Part: Yes
Placement on Vehicle: Front
Country of Origin: United States
Performance Part: No
