Triumph (750cc Three-Cylinder Trident Series)1968–1974 Triumph T150 Trident1972–1974 Triumph T150V Trident (5-Speed Models)(Factory Part Number Cross-Reference: 83-1573 / F11573)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Material: Stainless Steel
Brand: Triumph
Source: Imported from active eBay listing 398155616577 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Material: Stainless Steel
Brand: Triumph
This is a genuine OEM Harley-Davidson Screamin' Eagle Performance Parts ignition module. Designed for high-performance setups, this coveted vintage module features an 8000 RPM limit to replace the restrictive stock factory settings.
The module features a standard 7-pin rectangular male connector plug. The housing is physically sound, the mounting holes are in good shape, and the wire sleeve is clean without standard wear holes or raw exposures.
The back casing shows typical minor mounting wear and surface scuffs from use. This component has been kept in dry storage and is ready for installation or a high-performance backup setup.
Part Details:
Part Number: 32421-85A
Revision: RE V8
RPM Limit: 8000 RPM
Date Code: 9313
3. COMPATIBILITY / FITMENT
Fits 1340cc Evolution (Evo) Big Twin engines equipped with early 7-pin wiring harnesses:
1984–1994 Harley-Davidson FXR / FXRS / FXRT
1984–1994 Harley-Davidson Softail models (FXST / FLST)
1991–1994 Harley-Davidson Dyna Glide models (FXD)
1984–1993 Harley-Davidson Touring models (FLT / FLHT / FLHS)
Please check your motorcycle's connector layout to verify a match with the early 7-pin style configuration before ordering.
Has not been installed on a bike but has been stored in buble wrap.Its got a couple scratches shown in the pictures as best we can show some are microfiber scratches
Year Range: 2014-2023
Make: Harley-Davidson
Model Fitment: Touring Series Models, including:
Street Glide / Street Glide Special (FLHX / FLHXS)
Road Glide / Road Glide Special (FLTRX / FLTRXS)
Road King / Road King Special (FLHR / FLHRXS)
Electra Glide Ultra Classic / Ultra Limited (FLHTCU / FLHTK)
Saddlebag Compatibility: Designed specifically to complement Harley-Davidson CVO Stretched Saddlebags, aftermarket stretched bags, or standard OEM factory hard saddlebags.
Manufacturer Part Number: HW177001
Technical Fitment Audit: These are engineered explicitly for the 2014-up frame redesign geometry. They will NOT fit 1997–2013 legacy Touring frames due to completely different seat interface shapes and alternative side frame snap-in port configurations.
Condition: New
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Color: Red
Brand: Hogworkz
Country of Origin: United States
Source: Imported from active eBay listing 398215471487 for Shopify draft review.
Condition: New
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Color: Red
Brand: Hogworkz
Country of Origin: United States
Harley-Davidson (5-Speed Evolution Touring Bagger Models)
1989–1996 Harley-Davidson Electra Glide Ultra Classic (FLHTCU)
1984–1996 Harley-Davidson Electra Glide Standard / Sport (FLHT / FLHS)
1984–1996 Harley-Davidson Tour Glide Classic (FLTC / FLTCU)
1994–1996 Harley-Davidson Road King (FLHR)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Drag Specialties
Manufacturer Part Number: NA
Source: Imported from active eBay listing 398162351967 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Drag Specialties
Manufacturer Part Number: NA
Production Era Range: 1952-1956
Make: Harley-Davidson
Model Lineage Platforms:
Harley-Davidson K Model / KK Sport Solo (45ci / 750cc Side-Valve Twins)
Harley-Davidson KH / KHK Super Solo (55ci / 900cc Side-Valve Twins)
Configuration: Early Factory swingarm/cradle frame architecture with a bolt-on rear fender subframe strut assembly.
Technical Fitment Audit & Historical Correction: While this chassis layout represents the direct evolutionary predecessor to the Sportster line, please note for search index accuracy that Harley-Davidson did not introduce the overhead-valve "Ironhead" Sportster engine until 1957. This specific low-slung engine mount cradle footprint, straight front downtubes, and case clearance loops are engineered precisely for the 1952–1956 Side-Valve K-Model transmission and engine block. It will require custom fabrication and tab relocation to drop in a 1957–1985 Ironhead drivetrain.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398221448147 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
Wheel Size Configuration: 16-Inch Chrome Wire Spoke Wheel
Make Fitment: Harley-Davidson
Model Compatibility: Custom Chopper, Bobber, or Retro custom builds utilizing vintage Harley platforms.
Component Architecture: Vintage Wilwood Caliper / Wagner 5/8" Bore Master Cylinder
Foot Control Style: Retro Ribbed Folding Chopper Pegs
Technical Fitment Audit & Historical Correction: While this kit features premium vintage components perfect for a custom build style, please note for listing accuracy that Harley-Davidson did not introduce the overhead-valve Sportster "Ironhead" platform engine or its corresponding swingarm frames until 1957. Pre-1957 legacy small-twin models (such as the 1952 K-Model street twins) featured side-valve engine geometries and alternative frame widths. This custom swingarm, brake backing bracket spacing, and wheel offset configuration are optimized for standard 1957–1978 Ironhead Sportster frame rails or custom aftermarket chopper frames built around early Sportster drivetrains.
The package comes fully configured as a comprehensive, turnkey rear-end project kit. It features a genuine 16-inch factory OEM chrome 40-spoke laced wire wheel assembly, a solid steel brake disc rotor, a modern adjustable chrome-bodied dual coilover rear shock absorber suspension strut, and a complete high-performance mechanical foot control layout.
The hydraulic braking system is built from elite-tier components, housing an original vintage Wilwood multi-piston rear brake caliper pre-mounted onto its thick aluminum backing plate, a vintage Wagner 5/8" bore hydraulic rear brake master cylinder reservoir, and an armored stainless steel braided brake fluid line. The forward control plate mounts a set of vintage custom ribbed aluminum chopper footpegs with an integrated spring-loaded folding mechanism and a matching chrome rear brake lever pedal. The entire setup has been pre-assembled with a heavy-duty steel rear wheel axle shaft and matching alignment adjustment blocks, eliminating thousands of dollars in separate component tracking and fabrication labor.
Please note that this sale is strictly for exactly 1 complete rear end assembly kit consisting of 1 swingarm, 1 laced wheel with tire, 1 shock absorber, 1 caliper setup, and 1 foot control master cylinder assembly as pictured.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398221448146 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
2006-2017 Harley-Davidson Dyna Glide Models (FXD, FXDL, FXDB, FXDC, FXDWG)
2007-2017 Harley-Davidson Softail Models (FLSTF, FXST, FXSTB, FLSTC, FLSTN)
Harley-Davidson Genuine OEM Factory Part Numbers Cross-Reference: 60784-06 / 60764-06
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398261570907 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
1970-1984 Harley-Davidson Shovelhead Electra Glide (FL / FLH Models)
1971-1984 Harley-Davidson Shovelhead Super Glide (FX / FXE / FXWG / FXEF)
Custom Shovelhead Chopper or Bobber projects running standard 4-speed primary drive footprints
Harley-Davidson Genuine OEM Factory Part Numbers Cross-Reference: 60616-70 / 60616-70A (Alloy Inner Primary Housing Casting Series), 4-Speed Big Twin Powertrain Configurations
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Manufacturer Part Number: Shovelhead
Country of Origin: United States
Source: Imported from active eBay listing 398261570906 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Manufacturer Part Number: Shovelhead
Country of Origin: United States
1999-2005 Harley-Davidson Dyna Glide Models (FXD, FXDL, FXDX, FXDWG)
2000-2006 Harley-Davidson Softail Models (FLSTF, FXST, FXSTB, FLSTC)
Harley-Davidson Genuine OEM Factory Part Numbers Cross-Reference: 60665-99 / 60665-99B (Chrome Outer Primary Cover Casing), Twin Cam 88ci (1450cc) Powertrain Configurations
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398258334081 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
This bulk project lot has been structured cleanly to keep your shop tracking files completely accurate. The collection contains the following five specific structural engine castings:
1x 2006 Harley-Davidson Dyna Silver Inner Primary Casing: A highly specialized, one-year-only transitional layout engineered specifically to bridge the Twin Cam 88 engine footprint with the updated 6-speed transmission bolt pattern and locators.
2x Evolution Big Twin Touring Inner Primary Clutch Covers: Vintage 5-speed cast aluminum configurations tailored exclusively for 1340cc Evolution Road King, Electra Glide, and Tour Glide models spanning the 1990s.
1x Harley-Davidson 60677-01C Touring Inner Primary Housing: A rugged factory Twin Cam platform casing designed to service the expansive 2000–2011 FLH/FLT Touring series footprint.
1x OEM Harley-Davidson Inner Primary Cover 60677-01B: An authentic 2001–2006 factory structural casting matching the FLHT H1 touring engine bay configurations.
2006 Harley-Davidson Dyna Glide Models (Transitional 6-Speed TC88 Crossover Series)
1990-1998 Harley-Davidson Touring EVO Models (Road King, Electra Glide, Tour Glide 1340cc)
2000-2011 Harley-Davidson Touring Twin Cam Models (FLH, FLT, FLHT, FLTR 1450cc / 1584cc)
Harley-Davidson Genuine OEM Part Numbers Cross-Reference: 60661-06 (Dyna Silver), 60677-01C / 60677-01B (Touring Case Series), 60666-89 / 60667-89 (Evolution Touring Tracks)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398265227501 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
1977-1984 Harley-Davidson Shovelhead Electra Glide (FL / FLH Models)
1977-1984 Harley-Davidson Shovelhead Super Glide (FX / FXE / FXEF / FXWG)
1977-1982 Harley-Davidson FXS Low Rider (Matching era fitment configuration)
Custom Chopper or Bobber projects utilizing classic 4-speed Big Twin primary frameworks
Part Number & Brand Cross-Reference: Stamped Inner Casting Code 60506-77, Chrome Specialties Catalog Series
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Chrome Specialties
Country of Origin: United States
Source: Imported from active eBay listing 398261570893 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Chrome Specialties
Country of Origin: United States
1977-1985 Harley-Davidson Sportster 1000 (XLH1000 / XLCH1000 / XLS Roadster / XLX)
Custom Ironhead Chopper / Bobber / Cafe Racer projects running standard 1977-1985 4-speed primary frameworks
Harley-Davidson Genuine OEM Factory Part Numbers Cross-Reference: 34951-77 / 34951-77A (Satin Aluminum Outer Primary Cover Housing)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398261570896 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
2000-2006 Harley-Davidson Heritage Softail Classic (FLSTC / FLSTCI)
2000-2006 Harley-Davidson Softail Models (FLSTF Fat Boy, FXST Standard, FXSTB Night Train, FLSTN Deluxe)
Custom High-Performance Twin Cam 88 Overbore / Stroker projects utilizing standard 5-speed Softail primary offsets
Brand & Fitment Cross-Reference: Delkron Custom Performance Series, Drop-in upgrade for OEM Part Number 60607-00
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Delkron
Country of Origin: United States
Source: Imported from active eBay listing 398265227503 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Delkron
Country of Origin: United States
1970-1984 Harley-Davidson Shovelhead Electra Glide (FL / FLH Models)
1971-1984 Harley-Davidson Shovelhead Super Glide (FX / FXE / FXWG / FXEF)
Custom Shovelhead Chopper or Bobber projects running standard 4-speed primary drive footprints
Harley-Davidson Genuine OEM Factory Part Numbers Cross-Reference: 60616-70 / 60616-70A (Alloy Inner Primary Housing Casting Series), 4-Speed Big Twin Powertrain Configurations
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Manufacturer Part Number: Shovelhead
Country of Origin: United States
Source: Imported from active eBay listing 398265227504 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Manufacturer Part Number: Shovelhead
Country of Origin: United States
Please look at all the photos make sure this is what you need. Thank you.
2014-2022 Harley-Davidson Sportster 1200 Iron / Custom / Forty-Eight (XL1200NS / XL1200X / XL1200C)
2014-2022 Harley-Davidson Sportster 883 Iron / SuperLow (XL883N / XL883L / Rubber-Mount Engine Era Models)
Harley-Davidson Genuine OEM Factory Part Numbers Cross-Reference: 69200854 / 69201584 / 70146-14 (Main Chassis Wire Loom Fuse Block Assembly Series)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398272387632 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
2014-2022 Harley-Davidson Sportster 1200 Iron / Custom / Roadster (XL1200NS / XL1200X / XL1200C)
2014-2022 Harley-Davidson Sportster 883 Iron / SuperLow (XL883N / XL883L / Rubber-Mount Era Models)
Harley-Davidson Genuine OEM Factory Part Numbers Cross-Reference: 47000015 / 47000216 (Main Frame Structural Weldment Shell), 47587-10A (Rear Swingarm Assembly), 74700012 (Voltage Regulator Rectifier Module Pack)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Type: Frame
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398268215879 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Type: Frame
Brand: Harley-Davidson
Country of Origin: United States
2004-2022 Harley-Davidson Sportster 883 Low / Iron / SuperLow (XL883L / XL883N / XL883)
2004-2022 Harley-Davidson Sportster 1200 Custom / Nightster / Iron (XL1200C / XL1200N / XL1200NS / Rubber-Mount Engine Era Applications)
Harley-Davidson Genuine OEM Factory Part Numbers Cross-Reference: 24467-04A / 24468-04A (Structural Crankcase Set Body Halves), 23905-04 (Flywheel Rotating Assembly Track), ★CFMP2210371★ (Casing Serial Code Stamped ID)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Manufacturer Part Number: Harley
Country of Origin: United States
Source: Imported from active eBay listing 398268215884 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Manufacturer Part Number: Harley
Country of Origin: United States
2014-2022 Harley-Davidson Sportster 1200 Iron / Custom / Forty-Eight (XL1200NS / XL1200X / XL1200C)
2014-2022 Harley-Davidson Sportster 883 Iron / SuperLow (XL883N / XL883L / Rubber-Mount Engine Era Models)
Harley-Davidson Genuine OEM Factory Part Numbers Cross-Reference: 62700037 / 62700242 (Chrome Oil Tank Structural Reservoir Core Shell), 62700041 (Pop-Up Neck Seal Interface)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398268215886 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
The structural foundation of this seat pan remains completely solid and free of major fractures, structural cracks, or compromised primary mounts. There is visible weardown on the back side of the under-seat base plastic where the pan contour makes natural contact with the frame rails and rear fender during normal use. The black cover remains securely pulled around the base lip with standard factory upholstery fasteners firmly seated in the perimeter frame flange.
Direct fitment for 1991–1995 Harley-Davidson Dyna models (including FXD Super Glide, FXDL Low Rider, and associated platforms).
Manufacturer: Harley-Davidson Motor Company.
Factory Part Number Identification: 52628-95 (Stated on assembly).
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398294288928 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
Some are 9 inches in width and some are 10 inches in width
Harley-Davidson Sportster (XL883, XL1200, XL1100 Evolution models) 1982–2003
Harley-Davidson Softail (FXST, FLST heritage variants) 1984–1999
Custom Chopper, Bobber, and rigid frame applications using traditional 39mm/41mm side plate spacings
Please verify fitment and side plate center-to-center dimensions before purchase.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398272387630 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
1987-1994 Harley-Davidson FXR Super Glide / FXRS Low Rider / FXRT Sport Glide
1999-2000 Harley-Davidson FXR2 / FXR3 / FXR4 (CVO Transitional Re-release Models)
Harley-Davidson Genuine OEM Factory Part Numbers Cross-Reference: 52111-87, 52103-87, 52250-87A (Two-Up Smooth & Ribbed Dual Comfort Seat Assembly Series)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398272387624 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
The seat assembly is in very good, clean cosmetic condition with a structurally solid base pan. The white plastic pan remains bright, intact, and free of stress cracks, fractures, or warped mounting holes. The original textured black vinyl upholstery fits tightly over the internal foam structure with all factory staples securely anchored around the inner perimeter lip.
Direct fitment for 1998–2004 Yamaha V-Star 650 Custom (XVS650) models.
Manufacturer: Yamaha Motor Company.
Factory Part Number Identification: 4VR-24710-10-00 (Stamping visible on base).
Component Type: Front Driver Solo Saddle.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Yamaha
Country of Origin: United States
Source: Imported from active eBay listing 398294288932 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Yamaha
Country of Origin: United States
The seat assembly is in decent, functional vintage condition. The black vinyl top covering remains well-secured to the base plate with zero major rips, tears, or split seams along the primary seating surface. As noted, one of the original small decorative side emblems is missing from its factory placement. The heavy-gauge stamped steel base pan shows structural patina and areas of surface rust on the bottom side, typical for an authentic un-restored component of this era.
Direct fitment for 1957–1978 Harley-Davidson Sportster (XL, XLH, XLCH) Ironhead models.
Manufacturer: Harley-Davidson Motor Company.
Trim Styling: Lower perimeter accent row with classic chrome studs.
Component Type: Front Driver Solo Saddle.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398294288933 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
The seat pan is structurally solid with no cracks or compromises to the plastic mounting points. The vinyl skin shows no punctures or major rips. The underside leather/vinyl wrapping shows typical minor folding wear from being bolted to the rear fender. This is a direct-replacement part that is ready to bolt onto your bike.
COMPATIBILITY / FITMENT
Direct fitment for 1998–2010 Yamaha V Star 650 Classic (XVS650A) models.
Fits 1998–2010 Yamaha V Star 650 Custom (XVS650) models, though styling accents (studs) may differ from standard Custom trim.
Manufacturer: Yamaha Motor Corporation.
Part Type: OEM Passenger Pillion Seat.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Yamaha
Country of Origin: United States
Source: Imported from active eBay listing 398294288927 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Yamaha
Country of Origin: United States
