Fitment & Compatibility
Fits 1970–1992 Shovelhead and early Evolution 80" Big Twin engines (Models featuring the 25218-70A inner case-breather casting with internal steel vent tubes). [1, 2]
Fits 1993–1999 late-model Evolution 80" Big Twin engines (Models featuring the 25266-93 inner casting with the modern open-profile rib design).
Works as stock replacements for classic FL, FX, FXR, Dyna, and Softail platform builds.
Item Description
Total of 12 original factory OEM aluminum cam gear nose cone covers sold together as a single bulk lot.
Exactly four (4) of the covers are in nice, clean, ready-to-install condition with good outer finishes.
The remaining majority of the lot features flaking, peeling, and weathered chrome finishes.
The flaking covers are perfect cores that will need to be media sandblasted, stripped, and cleaned before use.
All structural aluminum foundations are solid with no cracks, broken mounting rings, or sheared tabs.
Most units still include the factory-pressed bronze pinion bushings, seals, and alignment sockets.
Ideal wholesale lot for swap meets, motorcycle repair shops, or custom chopper builders looking for restorable core inventory
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Machine Type: Street Motorcycle
Manufacturer Part Number: Evo
Compatible Model: Shovelhead
Material: Chrome
Vintage Part: Yes
Placement on Vehicle: Right
Country of Origin: United States
Performance Part: No
Source: Imported from active eBay listing 398298066384 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Machine Type: Street Motorcycle
Manufacturer Part Number: Evo
Compatible Model: Shovelhead
Material: Chrome
Vintage Part: Yes
Placement on Vehicle: Right
Country of Origin: United States
Performance Part: No
The vinyl cover has sustained fixed red paint overspray across sections that could not be chemically drawn out without damaging the factory textured material. It remains a rock-solid, structurally sound platform with a fully intact inner cushion configuration.
The underside base pan is structurally solid and includes the front slide mount bracket.
Direct factory fitment for 2001–2003 Gilroy-era Indian Scout and Indian Spirit cruiser models.
Manufacturer: Indian Motorcycle OEM (Gilroy, CA).
Component Type: Studded Solo Rider Saddle.
Cover Material: Genuine Premium Leather with Stitched Skirts.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Indian Motorcycle-Gilroy
Country of Origin: United States
Source: Imported from active eBay listing 398294288925 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Indian Motorcycle-Gilroy
Country of Origin: United States
Fitment & Compatibility
Fits 1986–2003 Harley-Davidson Sportster XL models (rigid-mount frames).
Direct replacement configuration for XLH883, XL883R, XLH1200, and XL1200C Custom platforms.
Features the classic five-speed manual transmission configuration and 100th Anniversary primary detailing
Low-mileage complete running 2003 Evolution V-Twin powertrain assembly pulled from a 100th Anniversary edition Sportster.
Verified low operational history showing exactly 6,400 documented miles on the odometer before vehicle teardown.
Includes a matching black custom shorty dual drag pipe exhaust system featuring aggressive downward radius cut tips.
Complete with a stock-style CV carburetor assembly fitted with a custom vintage 'fly eye' style mesh velocity stack air cleaner.
Engine crankcase covers, primary inspection plate, and gearcase cover feature a raw satin aluminum and natural structural finish.
Standard external component details include the mechanical rear brake master cylinder assembly, footpeg link mount framework, and starter motor setup.
Structural cases, cooling fins, and top-end rocker assemblies are completely solid with no visible fluid leaks, broken exhaust head studs, or cracked mounting tabs
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Engine Type: 4-Stroke
Country of Origin: United States
Source: Imported from active eBay listing 398302300218 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Engine Type: 4-Stroke
Country of Origin: United States
This is an inventory clearance lot of vintage and aftermarket cruiser passenger pads.
The collection includes a diverse assortment of classic backrest pads and passenger pillions perfect for a swap meet vendor, chopper shop, or multi-bike builder.
Included are tall touring sissy bar pads, traditional pillow-top tufted pads, low-boy inserts, a mini universal chrome chopper hoop with integrated padding, and multiple standalone passenger fender pillion pads.
The pieces show various stages of age-appropriate wear from storage and use, with some cushions remaining in very good shape while others carry a light, honest patina.
All items are being offered together in one bulk package exactly as found.
Harley-Davidson Electra Glide / Tour Pak Styling
Harley-Davidson Heritage Softail Classic / Fat Boy Configurations
Harley-Davidson Dyna Wide Glide Low-Boy Setup
Sportster XL Cruiser Fender Pillions
Universal Custom Rigid Chopper / Bobber Mini Sissy Bar Loops
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398298066382 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
Up for sale is a completely unique, premium 2003 Harley-Davidson Sportster 100th Anniversary custom hardtail chopper rolling chassis project bundle. PLEASE NOTE: This listing includes the complete rolling chassis, frame, bodywork, wheels, and front end assembly—the motor is strictly NOT included.
This is a one-of-a-kind custom platform ideal for independent cycle shops, professional builders, or custom bobber project garages looking to build a high-caliber bike without doing the initial fabrication and frame alignment labor.
Key Package Highlights:
Low Original Mileage: Only 6,400 original miles logged on the main chassis and components.
Premium Frame Geometry: Clean custom hardtail frame conversion featuring straight lines, integrated battery mount, spring bobber seat setup, and custom low-profile rear fender.
Authentic Tin: Complete with an original, low-mileage 100th Anniversary badged fuel tank.
Legit Paperwork: Comes with a clean title asset matching the neck numbers.
Freight, Logistics & Crating Rules:
Domestic US Buyers: Continental United States freight shipping is completely covered by the seller. Please note that the motorcycle will be carefully dismantled prior to freight booking to guarantee a safe, flat, secure palletized transit.
International & Overseas Buyers: Overseas buyers are welcome! You do not need to coordinate the shipping process alone. I will personally manage and coordinate the international logistics from my end. However, overseas accounts must contact me prior to purchasing. We will work directly together, share calculated transport cell information, and figure out the most cost-effective, custom freight solution to securely get these parts to your country.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398328032354 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
This is an original OEM factory matching pair of front fork assemblies removed from a vintage Yamaha Virago 750 (XV750).
Unlike standard single-disc front ends, this configuration features the highly desirable dual disc brake lower sliders, allowing for brake calipers to be mounted on both the left and right sides.
Condition
Pre-owned vintage condition with a natural, unpolished aluminum finish.
Sliders exhibit minor cosmetic surface wear, weathering, and light scratches consistent with age and regular use.
Mounting brackets, caliper holes, and axle clamp areas are intact and structurally sound.
Fork tubes show standard cosmetic wear; seals should be inspected or replaced prior to installation as is standard with vintage assemblies.
Fitment
Yamaha Virago 750 (XV750) models from 1981, 1982, and 1983.
Please verify your model's exact tube diameter and setup requirements before purchasing to ensure compatibility.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Yamaha
Placement on Vehicle: Front
Country of Origin: United States
Type: Complete Fork Suspension
Machine Type: Street Motorcycle
Source: Imported from active eBay listing 398309525207 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Yamaha
Placement on Vehicle: Front
Country of Origin: United States
Type: Complete Fork Suspension
Machine Type: Street Motorcycle
Kuryakyn Bulk Lot Harley CV Carb Air Cleaner Kits Custom Chopper Adapters Wholesale
Bulk wholesale lot of 9 premium Kuryakyn brand CV Carburetor air cleaner kits and custom chopper builder adapters. This is a high-margin inventory bundle perfect for new motorcycle shops, mobile mechanics, or swap meet vendors looking to secure reliable stock.
These premium Kuryakyn kits easily retail for up to $170 each all day long. We are liquidating the entire lot together at a sharp discount to free up warehouse space immediately.
Inventory Breakdown
2x Kuryakyn Harley Evolution (1993–1999) Big Twin CV Carb Chrome Air Cleaner Kits
2x Kuryakyn Harley Sportster XL 1200 (1991–2006) CV Carb Air Cleaner Kits
2x Kuryakyn Harley Sportster (1991–2006) CV Carb Chrome Filter Kits
3x Kuryakyn Harley CV Carburetor Bolt Pattern / Custom Chopper Adapters (Black Finish)
Item Specifications
Brand: Kuryakyn
Condition: New (Open Box / Overstock Bulk Deal)
Fitment: Fits designated Harley-Davidson Evolution Big Twin and Sportster XL models running stock CV Carburetors (verify your specific year ranges above)
Finish: Selection of Chrome and Matte Black assemblies included
Shipping & Logistics
Items will be safely packaged and shipped together in a single bulk lot to optimize your freight costs
Secure tracking provided upon shipment
Condition: New
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Kuryakyn
Country of Origin: United States
Source: Imported from active eBay listing 398328032358 for Shopify draft review.
Condition: New
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Kuryakyn
Country of Origin: United States
Direct Fitment: Genuine factory original equipment engineered for 2007 Yamaha V Star 650 models (Custom / Classic / Silverado configurations).
Cross-Generation Fit: Swaps directly into various 1998–2016 Yamaha V Star 650 (XVS650) platform frame setups using standard factory steering neck dimensions.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Yamaha
Country of Origin: United States
Source: Imported from active eBay listing 398328032361 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Yamaha
Country of Origin: United States
The cushions are in good, pre-owned condition with clean vinyl faces free of any major rips, tears, or open seams. The backing plates and underside material show normal scuffs, light surface oxidation on the metal brackets, and general dusty accumulations from storage, which are completely hidden once bolted down. The lower filler pad includes the factory three-bolt triangular mounting configuration with integrated threaded studs and locking flange nuts.
Please note that this sale is strictly for exactly 2 pieces as pictured.
1997-2013 Harley-Davidson Electra Glide Classic (FLHTC)
1997-2013 Harley-Davidson Electra Glide Ultra Classic (FLHTCU)
2010-2013 Harley-Davidson Electra Glide Ultra Limited (FLHTK)
1998-2009 Harley-Davidson Road Glide Standard (FLTR)
2011-2013 Harley-Davidson Road Glide Ultra (FLTRU)
1997-2013 Harley-Davidson Road King models equipped with a rigid King Tour-Pak lid setup
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Placement on Vehicle: Rear
Country of Origin: United States
Backrest Type: Backrest
Machine Type: Street Motorcycle
Source: Imported from active eBay listing 398320767109 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Placement on Vehicle: Rear
Country of Origin: United States
Backrest Type: Backrest
Machine Type: Street Motorcycle
Direct Fitment Generations: Native fit for 1997–2008 Harley-Davidson Touring models including Road King (FLHR, FLHRC, FLHRS), Electra Glide (FLHT, FLHTC, FLHTCU), and Road Glide (FLTR) setups.
OEM Swap Interlocking: Replaces original factory part codes 47502-97 (Right Side) and 47504-97 (Left Side)
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398332370051 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
Harley-Davidson Panhead FL / FLH Duo-Glide models (1958–1964)
Harley-Davidson Shovelhead FLH Electra-Glide electric start models (1965–1984)
Compatible with classic rigid or swingarm 4-speed Big Twin frames configured for heavy-duty square battery boxes
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Manufacturer Part Number: Shovelhead
Country of Origin: United States
Source: Imported from active eBay listing 398332370054 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Manufacturer Part Number: Shovelhead
Country of Origin: United States
Up for sale is an incredibly rare, beautifully preserved vintage 1975 Honda CL175 Scrambler project frame and rolling chassis assembly lot. PLEASE NOTE: This premium listing is for the complete structural frame assembly and rear rolling gear—there is NO motor included in this sale.
This bundle is a premium survival find for vintage Honda motorcycle restorers, custom scrambler builders, or collectors looking for an untouched, unchopped frame backbone that has spent its life protected indoors. Finding a CL175 frame package with mileage this low and legitimate paperwork is nearly impossible on the open market today.
Key Premium Highlights:
Ultra-Low Verified Mileage: Foundational components have logged only 5,400 original miles since rolling off the factory floor.
The Ultimate Legal Asset: Comes complete with a legitimate clean title document matching the stamped frame neck numbers perfectly. No salvage or bonding paperwork headaches.
Chassis Components Included: Features the factory main steel backbone frame, original rear shocks, complete rear spoke wheel assembly, rear swingarm assembly, foot pegs, and rear brake linkages.
Electrical & Accessories: Includes the factory main wiring harness path and original turn signal blinker stalks.
Survival Collector Bonuses: Comes complete with the incredibly rare original factory owner's manual and the original under-seat factory tool kit wrapper.
Logistics & Overseas Shipping Rules:
Domestic US Buyers: Continental United States flat palletized freight shipping is fully included and covered in the purchase price. Please note that components will be carefully organized and packaged to guarantee a safe, flat, secure transit straight to your garage or commercial shop space.
International & Overseas Buyers: Overseas buyers are highly welcome! You do not have to coordinate the shipping process alone. I will personally manage and coordinate the international logistics from my end. Please contact me directly before purchasing. Once you reach out, you will be sent transport cell information so we can communicate directly, look at international rates, and work together to figure out the most cost-effective and secure custom freight solution for your country.
Condition: Beautiful vintage project condition. Shows some minor, expected light surface patina and aging from storage, but the frame is structurally true, straight, unchopped, and retains clean original factory paint lines.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Honda
Manufacturer Part Number: CL175
Country of Origin: United States
Source: Imported from active eBay listing 398328109289 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Honda
Manufacturer Part Number: CL175
Country of Origin: United States
Premium complete custom front end assembly sourced from a vintage dealer cache. This all-in-one setup includes a polished triple tree with 41mm Showa style forks, an integrated chrome LED 3-lamp headlight kit with bullet turn signals, and a custom 23-inch wire spoke front wheel.
Comes fully loaded with the complete hydraulic front brake master cylinder assembly, matching front brake caliper, brake lines, controls, mirrors, and 18-inch ape hanger handlebars.
Handlebar Exchange Option: The pre-installed 18-inch bars can be swapped for a clean set of 14-inch or 18-inch DNA Monster handlebars from our inventory. This sale is strictly for exactly ONE (1) multi-component complete front suspension pack as pictured.
Section 3: DISCREPANCIES
Handlebar Finish: Chrome on the pre-installed 18-inch ape hangers shows noticeable green pitting and weathering.
Fork Cover: A small localized cosmetic dent is present on one of the top chrome fork covers.
Wheel Rim: The lip of the 23-inch wire spoke wheel features a small chip in the finish paint.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398335756531 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
Harley-Davidson Twin Cam 88 and Twin Cam 96 engines (1999–2006/2007-up Softail, Dyna Glide, and Touring platforms)
Fits standard carbureted or fuel-injected "Alpha" series crankcases configured for standard factory stroke specifications
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398338939761 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
A matching pair of genuine vintage factory original front fork inner legs and outer lower slider assemblies, explicitly pulled from a classic British post-war BSA motorcycle. These are the standalone bare fork assemblies matching early 1950s A7 and A10 Plunger frame configurations (such as the legendary 650 Golden Flash series).
Sourced out of a long-term powersports dealer warehouse storage cache, this pair comes equipped with the prominent exposed external load springs, raw steel upper slider tubes, painted lower slider legs, and the factory integrated pinch-bolt front axle guide clamp mounts still structurally solid on the lower feet.
This lot is being offered as a dedicated rebuild core or historical restoration set—ideal for authentic custom bobbers, vintage British choppers, or original period-correct barn find refurbishments.
Please note that this sale is strictly for exactly ONE (1) pair containing a total of TWO (2) individual standalone vintage fork assemblies as pictured.
DISCREPANCIES
Heavy Corrosion: The exposed external load springs and upper bare metal slider tubes display significant structural pitting, continuous heavy rust scaling, and finish loss from decades of storage.
Weathered Finish: The lower slider legs feature heavily weathered black paint with prominent scuffs, localized scraping, flaking coats, and fluid staining throughout.
Hardware Note: This listing consists strictly of the two bare fork units; it does not include the triple trees, steering stem, axle rod, or internal dampening seals.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: BSA (Original OE)
Country of Origin: United States
Source: Imported from active eBay listing 398338939759 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: BSA (Original OE)
Country of Origin: United States
Genuine factory original Harley-Davidson electrical nacelle jumper wiring harness, brand new old stock (NOS) inside its original sealed factory packaging. Sourced directly out of an organized vintage powersports dealer cache, this component carries factory part number 70420-98, with an original packaging stamp date of 09/06/02.
This premium insulated lead wire jumper layout features clean, factory-crimped terminal connectors entirely free of pin corrosion, green oxidation, or wiring insulation dry rot. Essential for restoring proper headlight sub-harness functionality or wiring a custom chrome headlight nacelle conversion kit cleanly without splicing your factory wires.
Please note that this sale is strictly for exactly ONE (1) individual standalone factory jumper harness in its original sealed bag as pictured.
DISCREPANCIES
Packaging Wear: The authentic white plastic Harley-Davidson parts bag exhibits localized oil smudge marks, shelf dust, and vintage dealership marker handwriting ("Panther") from long-term warehouse storage.
Condition: New
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398338939755 for Shopify draft review.
Condition: New
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
Premium vintage factory original Harley-Davidson chrome steel oil tank wrap-around battery box carrier tray assembly. Sourced directly out of an organized classic powersports dealer warehouse cache, this heavy steel bracket features a side-integrated structural frame mounting wing plate with dual rear-facing alignment installation pins intact.
The frame perimeter is completely structurally sound with zero cracked welds, unbent wall lips, and fully clear tie-down loop eyelets to anchor a classic heavy-duty lead-acid battery compartment safely. It provides an exceptional period-correct structural piece or clean aesthetic replacement to build out an authentic vintage street tracker, bobber rebuild, or original factory-spec Ironhead restoration project.
Please note that this sale is strictly for exactly ONE (1) individual standalone battery carrier tray assembly as pictured.
Section 3: DISCREPANCIES
Surface Oxidation: The polished chrome plating exhibits light superficial weathering dots, localized storage patina freckling on the interior floor shelf, and faint surface corrosion lines surrounding the mounting stud intersections.
Section 4: COMPATIBILITY / FITMENT
Harley-Davidson Ironhead Sportster XL / XLH / XLCH models (late 1970s–1981)
Fits vintage 1000cc overhead-valve Ironhead motor frames configured with the factory right-side battery tray frame brackets.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Manufacturer Part Number: Sportster
Country of Origin: United States
Source: Imported from active eBay listing 398349226521 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Manufacturer Part Number: Sportster
Country of Origin: United States
Premium pair of genuine factory OEM Harley-Davidson chrome quick-detach sissy bar sideplates complete with the matching structural frame fender rail docking hardware kit. Sourced directly out of an organized classic powersports dealer warehouse cache, this comprehensive mounting package includes both the left and right sideplates along with six (6) structural button-head torx mounting bolts.
Features integrated heavy-duty quick-release rotary latch mechanisms and pre-fit composite alignment docking bushings to allow rapid, toolless installation and removal of your passenger backrest upright assemblies. The structural steel core bodies are completely unbent with flawless mechanical tracking paths.
Please note that this sale is strictly for exactly ONE (1) pair of sideplates with the included mounting hardware pack as pictured.
Section 4: COMPATIBILITY / FITMENT
Harley-Davidson Sportster XL models (1994–2003 including XLH883, XLH1200, Custom, and Hugger variants)
Fits standard rigid-mount Sportster rear fender struts utilizing the 53806-06 or equivalent quick-disconnect docking configuration patterns.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398349226514 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
Harley-Davidson (74ci / 1200cc Shovelhead Alternator Cone Engine Models)
1970–1977 Harley-Davidson Electra Glide (FL / FLH / FLHF)
1971–1977 Harley-Davidson Super Glide (FX / FXE)
1977–1977 Harley-Davidson Low Rider (FXS)
Note: Directly fits standard 1970–1977 nose cone engine cases utilizing a 74-cubic-inch displacement architecture baseline configuration. Please check your inner cam bearing diameter tolerances for late-era 1978–1984 80ci case matching profiles.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Manufacturer Part Number: 25501-70
Universal Fitment: No
Vintage Part: Yes
Compatible Year: 1977, 1970
Country of Origin: United States
Source: Imported from active eBay listing 398167627336 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Manufacturer Part Number: 25501-70
Universal Fitment: No
Vintage Part: Yes
Compatible Year: 1977, 1970
Country of Origin: United States
Original genuine factory OEM Harley-Davidson 16-inch solid cast aluminum rear disc wheel assembly, explicitly pulled from a classic Softail Fat Boy platform. Sourced out of a clean powersports dealer warehouse cache, this iconic heavy-duty wheel comes fully equipped with its original multi-tooth rear belt drive sprocket pulley, a black powder-coated structural center accent hub plate, and matching bolt hardware.
The wheel rim lip, sprocket teeth, and internal bearing paths remain in very good, structurally sound mechanical condition without roadside curbing damage, flat spots, or cracks. Perfect option to refresh a damaged wheel, build out a custom bobber project, or restore a vintage cruiser layout.
Please note that this sale is strictly for exactly ONE (1) complete integrated solid rear wheel and sprocket pulley assembly package as pictured.
Section 3: DISCREPANCIES
Tire Replacement Required: The pre-installed wide whitewall road tire is severely worn down, completely dry-rotted, and suffers from a slow leak that goes flat intermittently. It is included strictly to protect the rim during shipping and must be completely replaced before any road use.Section 4: COMPATIBILITY / FITMENT
Harley-Davidson Fat Boy FLSTF / FLSTFI models (1990–1999 Evolution Big Twin series)
Fits broad 1984–1999 Evolution Softail frames using standard 3/4-inch rear axle geometries and belt drive alignments.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Type: Wheel
Machine Type: Street Motorcycle
Color: Silver
Manufacturer Part Number: 40306-00 / 4109203
Quantity: 1
Wheel Diameter: 16
Compatible Fastener Seat Type: Axle
Wheel Width: 3
Country of Origin: United States
Placement on Vehicle: Rear Wheel
Source: Imported from active eBay listing 398360707462 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Type: Wheel
Machine Type: Street Motorcycle
Color: Silver
Manufacturer Part Number: 40306-00 / 4109203
Quantity: 1
Wheel Diameter: 16
Compatible Fastener Seat Type: Axle
Wheel Width: 3
Country of Origin: United States
Placement on Vehicle: Rear Wheel
Please note that this item is a weathered daily-rider restoration core showing extensive era-correct cosmetic wear; the black paint finish layer displays significant road-facing patina, surface scratches, minor paint scuffs, and heavy localized storage oxidation along the lower edges as clearly documented in the photo. The heavy steel shell structure remains rock-solid and structurally straight with no major rust-through holes or edge dents—making it an exceptional core for media-blasting, patching, priming, or running as-is for a rat-style chopper. Please note that this sale is strictly for exactly ONE (1) individual standalone front fender assembly as pictured.
Harley-Davidson (4-Speed Big Twin Wide Glide Front Ends)
1949–1957 Harley-Davidson Panhead Hydra Glide (FL / FLH Models)
1958–1964 Harley-Davidson Panhead Duo-Glide (FL / FLH Models)
1965–1984 Harley-Davidson Shovelhead Electra Glide (FL / FLH / FLHS Models)
Note: Specific to standard wide-glide telescopic front ends utilizing 41mm fork assemblies. Will not fit FX Narrow Glide models (Sportster/FXWG style front forks) without custom-fabricated adapter brackets.
Condition: Used
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Manufacturer Part Number: Shovelhead
Compatible Model: FL
Material: Chrome
Vintage Part: Yes
Placement on Vehicle: Front
Country of Origin: United States
Source: Imported from active eBay listing 398174540398 for Shopify draft review.
Condition: Used
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Manufacturer Part Number: Shovelhead
Compatible Model: FL
Material: Chrome
Vintage Part: Yes
Placement on Vehicle: Front
Country of Origin: United States
needs a good polish
Premium custom chrome steel headlight mounting block bracket, explicitly pulled from a classic FXR platform cache. This heavy-duty structural mount is designed to bolt directly under the factory upper triple tree visor configuration scheme to securely support standard bottom-mount bullet or bucket style headlight headlight assemblies.
Features a integrated square mounting block tab pre-threaded for standard mounting hardware. The structural steel plate is completely solid with crisp, unbent mounting hole passages. Ideal small replacement part or clean upgrade element for a custom chopper build, narrow glide custom setup, or classic performance street machine restoration.
Please note that this sale is strictly for exactly ONE (1) individual standalone headlight mounting bracket as pictured.
Section 3: DISCREPANCIES
Surface Condition: storage shelf scuffs from long-term dealership warehouse storage. The unpolished underside shows typical light handling film.
Section 4: COMPATIBILITY / FITMENT
Harley-Davidson FXR / FXRS / FXLR / FXRT platforms (1982–1994)
Harley-Davidson Sportster XL models (1984–2003 utilizing narrow glide 39mm or 35mm front ends)
Harley-Davidson Dyna Glide FXD models (1991–2005)
Fits broad top-mount visor layouts configured for bottom-hanging secondary headlight headlight fixtures.
Condition: New
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Harley-Davidson
Country of Origin: United States
Source: Imported from active eBay listing 398349226513 for Shopify draft review.
Condition: New
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Harley-Davidson
Country of Origin: United States
Year Range: 2000-2007 (Select models through 2007 depending on front/rear caliper layout)
Make: Harley-Davidson
Model Fitment:
Touring Series (Electra Glide FLHT, Road King FLHR, Street Glide FLHX, Road Glide FLTR)
Softail Series (Heritage FLSTC, Fat Boy FLSTF, Night Train FXSTB, Softail Standard FXST)
Dyna Glide Series (Low Rider FXDL, Super Glide FXD, Wide Glide FXDWG)
Compound Profile: Premium Organic Performance Composition
Cross-Reference Part Numbers: Twin Power #59-2361 / Harley OEM #44082-00, #44082-00A, #44082-00B
Technical Fitment Audit: This backing plate profile is designed to match the 4-piston calipers used by Harley-Davidson from 2000 to 2007. It will NOT fit early-generation 1984–1999 single-piston setups, nor will it clear modern 2008–Up Brembo-style touring calipers.
Condition: New
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Placement on Vehicle: Rear
Type: Brake Pad
Brand: Twin Power
Country of Origin: United States
Source: Imported from active eBay listing 398196871036 for Shopify draft review.
Condition: New
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Placement on Vehicle: Rear
Type: Brake Pad
Brand: Twin Power
Country of Origin: United States
This is a massive, premium wholesale dealer lot consisting of 8 brand-new, premium custom custom billet motorcycle brake rotors manufactured by Performance Machine (PM) and Xtreme Machine (XM). These high-end custom components are still sealed in their original factory cardboard packaging cards with intact protective shrink wrap, completely untouched and free of road miles, wear, or installation marks.
This wholesale inventory package contains the following 9 distinct factory-sealed performance rotors:
1x Xtreme Machine Front Rotor (#0133-1522XCRLS-BMP): Black/Chrome Contrast Cut. Fits Harley Touring, Softail, and Dyna applications.
1x Xtreme Machine 11.8” Rear Rotor (#0133-1802XEXS-CH): Show Chrome finish. Fits 2008–2018 Harley Touring models.
1x Xtreme Machine 11.8” Rear Rotor (#0133-1802XLAS-BM): Black Contrast finish. Fits 2006–2025 Harley-Davidson models.
1x Performance Machine Royce 11.8” Rear Rotors (#0133-1802RYCS-CH): Show Chrome finish. Fits Harley Touring models.
1x Xtreme Machine 11.5” Rear Rotor (#0133-1522XCRRS-CH): Show Chrome finish. Universal fitment for 1984–2024 Harley-Davidson applications.
1x Performance Machine Supra 11.8” Rear Rotor (#0133-1802SUPRS-CH): Show Chrome finish. Optimized for Harley platforms.
2x Performance Machine Rycsa 11.8” Rear Rotors: Black Contrast finish. Fits Harley Touring and Softail chassis setups.
Condition: New
Fitment: Verify fitment using the photos, part numbers, and item specifics before purchase.
Brand: Xtreme Machine
Type: rotors
Country of Origin: United States
Source: Imported from active eBay listing 398196871037 for Shopify draft review.
Condition: New
Fitment: Only use fitment explicitly shown in the copied eBay description/item specifics. Buyer should verify fitment using photos, part numbers, and listed details.
eBay Item Specifics
Brand: Xtreme Machine
Type: rotors
Country of Origin: United States
