Unlike low-grade replica seals that rapidly tear, harden, or weep under intense hydraulic pressure, these premium Made in Italy BikeMaster seals are engineered from an advanced elastomer compound that exhibits high resistance to structural fork oil additives. Precision-ground sealing lips automatically adjust to internal pressure spikes during heavy front brake compression and sudden extension cycles. This mechanical configuration establishes a reliable positive-containment boundary around your 39mm stanchion tubes, shielding your chrome upper tubes from premature wear while protecting your front brake rotors from catastrophic oil saturation on the road.Product Specifications & Engineering Parameters:
Brand: BikeMaster / Ariete (Premium High-Performance Aftermarket Suspension Core)
Component Type: Front Fork Hydraulic Assembly Primary Oil Seal Set
Total Kit Volume Sizing: 2-Piece Mechanical Set (Complete Left & Right Fork Legs)
Manufacturer Component Code: 429113
Production Run Reference: Lot No. 20131004
Physical Dimensions: 39mm Internal Diameter x 51mm Outer Diameter x 8mm/9.5mm Total Thickness Profile
Material Base: High-purity chemical-resistant NBR rubber matrix fortified with integrated internal garter spring tensioners.
Country of Origin: Made in Italy
Platform Fitment Bounds: Direct factory performance drop-in maintenance upgrade or replacement safety oil seals for 39mm conventional front fork systems on 2003 to 2006 Honda cruiser models (specifically cross-referenced to factory handwritten specifications for VT600 platforms):
2003–2006 Honda Shadow VLX 600 (VT600C)
2003–2006 Honda Shadow VLX 600 Deluxe (VT600CD)
This V-Factor Fork Seal and Bushing Kit for 41mm Forks fork seal and bushing kit from Mid USA (part number 33692) is designed for Harley-Davidson motorcycles equipped with 41mm front forks from 1984 and later. This complete rebuild kit is ideal for replacing worn fork seals and bushings to restore proper suspension performance and eliminate leaking fork legs.
The kit includes upper and lower fork bushings, fork seals, seal washers, and retaining rings for a complete front fork service. Perfect for fork tube replacement, suspension maintenance, or full front-end rebuilds.
Features:Brand: Mid USA / V-FactorPart Number: 33692Type: Fork seal and bushing rebuild kitFits 41mm front forksIncludes upper and lower bushingsIncludes fork seals, washers, and retaining ringsHelps eliminate fork leaks and suspension playOEM-style replacement components
Fitment:
Harley-Davidson Models with 41mm Forks:1984-Later
Common applications include many:Touring modelsDyna modelsSoftail modelsFXWG Wide Glide models
(Verify exact year and fork size before purchasing)
Notes:Front fork rebuild kitProfessional installation recommendedFork oil and installation tools sold separately
This Bikers Choice fork leg seal set (49-2493) is a 10-pack of premium replacement seals designed for Harley-Davidson FL models from 1949 to 1977. These seals replace OEM part number 45852-48 and are used to prevent fork oil leaks while maintaining proper suspension performance.
Ideal for shop inventory, multiple restorations, or bulk maintenance, these seals provide consistent OEM-style fitment and durability for vintage Harley front ends.
Features:Brand: Bikers ChoicePart Number: 49-2493Replaces OEM: 45852-48Type: Fork leg sealsQuantity: 10 seals (bulk pack)Prevents fork oil leaksImproves suspension performanceOEM-style fit and functionDurable construction
Fitment:
Harley-Davidson Models:FL Models:1949–1977
(Panhead and Shovelhead applications)
Notes:10-piece bulk packDesigned for vintage fork leg applicationsVerify dimensions and compatibility before purchasing
These Bikers Choice fork plug washers (489729) are designed to provide a proper seal for Harley-Davidson fork tube plugs, preventing leaks and maintaining correct fork pressure. This 10-pack is ideal for shop use, multiple services, or keeping spares on hand.
Built to OEM-style specifications, these washers ensure a reliable seal during fork maintenance or rebuilds.
Features:Brand: Bikers ChoicePart Number: 489729Type: Fork plug sealing washersQuantity: 10 washersOEM-style replacementHelps prevent fork oil leaksDurable construction for repeated service use
Fitment:
Harley-Davidson Models:
FXWG (Wide Glide):1980–1983
Softail Models:1984–1999
Notes:Designed for fork tube plug sealing10-piece bulk packAlways verify size and application before purchasing
This 35mm fork tube top cap is a direct replacement component for Harley-Davidson Narrow Glide front ends. Designed to fit FXE, FXS, and FXEF models from 1973 through early 1986, this cap seals the top of the fork tube and helps maintain proper fork pressure and performance.
Ideal for repairs, maintenance, or restoring vintage Harley front suspension systems.
Sold as a single cap – not a pair.
Features:Type: Fork tube top capFits 35mm fork tubesNarrow Glide applicationOEM-style fit and functionHelps seal fork assembly properlyDurable constructionPerfect for maintenance or restorationSold individually
Fitment:
Harley-Davidson Models:FXE Super Glide – 1973–1986 (early)FXS Low Rider – 1973–1986 (early)FXEF Fat Bob – 1979–1986 (early)
Notes:Fits 35mm Narrow Glide forks onlySold as one (1) capVerify fork size before purchasing
This 41mm fork seal and bushing kit is a complete suspension rebuild solution for Harley-Davidson motorcycles equipped with 41mm front forks (1984 and later). Designed to restore smooth fork operation, this kit includes all essential wear components to eliminate play, reduce leaks, and improve ride quality.
Ideal for maintenance, restoration, or full front-end rebuilds, this kit ensures proper fork alignment and long-lasting performance.
Features:Type: Fork seal & bushing kitFits 41mm front forksIncludes upper and lower bushingsIncludes fork seals and seal washersIncludes retaining ringsHelps eliminate fork play and oil leaksRestores smooth suspension operationOEM-style replacement components
Fitment:
Harley-Davidson Models (41mm Forks):
Touring Models (FL / FLH / FLT):1984 and newer (Electra Glide, Road King, Tour Glide – verify fork size)
Dyna Models (FXD / FXDWG / FXDL / FXR variants):1984 and newer
Softail Models (FXST / FLST series):1984 and newer (select models with 41mm forks)
Sportster Models (XL series):1984 and newer
Notes:Fits models equipped with 41mm forks onlyAlways confirm fork diameter before purchasingKit includes both bushings and seals for a complete rebuild
This All Balls 56-125 fork seal and dust wiper kit is a high-quality suspension rebuild solution designed for Harley-Davidson models equipped with 39mm Showa front forks. This complete kit includes both fork oil seals and dust wipers to restore proper fork function, prevent leaks, and protect against dirt and debris.
Built to meet or exceed OEM specifications, All Balls components are known for durability and performance. Ideal for fork maintenance, rebuilds, or restoring ride quality on worn suspension systems.
This kit is widely compatible across Harley Dyna and Sportster models, as well as select Honda and Suzuki applications, making it a versatile option for multiple platforms.
Features:Brand: All BallsPart Number: 56-125Type: Fork seal & dust wiper kitIncludes oil seals and dust sealsDesigned for 39mm Showa forksPrevents fork oil leaksProtects against dirt and debrisImproves suspension performanceDurable, OEM-quality materials
Fitment:
Harley-Davidson Models (39mm Showa Forks):
Dyna Models:1991–2005 FXD, FXDL, FXDC, FXDX, FXDWG, FXDS-CONV
Sportster Models:2018–2020 XL1200X Forty-Eight2018–2020 XL1200NS Iron 12002018–2020 XL1200CX Roadster2018–2020 XL883N Iron 8832018–2019 XL883L SuperLow2018–2019 XL1200C Custom
Additional Applications (Verify Fitment):
Honda Models:1980–1983 GL1100 Goldwing1983 CX650 Turbo1981–1983 CB900F / CBX1984–1988 VF700 / VF750 / Magna / Shadow / Interceptor
Suzuki Models:1992–2004 VS800 Intruder
Notes:Fits models equipped with 39mm Showa forks onlyAlways verify fork size and application before purchasing
This James Gaskets JGI-47519-83-A2 wheel bearing oil seal is a premium OEM-style replacement designed for a wide range of Harley-Davidson Big Twin and Sportster models from 1984 through 1999. Engineered for durability and precision, this seal helps protect wheel bearings by keeping contaminants out while retaining lubrication for smooth, long-lasting performance.
James Gaskets is known for high-quality materials and reliable sealing performance, making this an excellent choice for maintenance, restoration, or wheel service.
Features:
Brand: James Gaskets
Part Number: JGI-47519-83-A2
Type: Wheel bearing oil seal
Replaces OEM: 47519-83A
OEM-style fit and function
Helps retain grease and block contaminants
Durable construction for extended service life
Ideal for maintenance and restoration
Fitment:
Harley-Davidson Models:
Dyna Models:
1991–1999 FXDB, FXDC, FXDL, FXDS-CONV, FXD, FXDX, FXDWG
Touring Models:
1984–1999 FLH, FLHT, FLHTC, FLHTCU, FLHR, FLTR
Includes Electra Glide, Road King, Road Glide variants
Softail Models:
1984–1999 FXST, FXSTC, FLST, FLSTC, FLSTF, FXSTS, FXSTB
FXR Models:
1984–1994 FXR, FXRS, FXRP, FXLR
Sportster Models:
1984–1999 XLH 883 / 1100 / 1200
XLX 1000, XR 1000, XL 1200C, XL 883C
Note:
Fits a wide range of Harley-Davidson applications. Always verify bearing size and seal compatibility before purchasing.
This set of 10 fork ring stoppers is designed for Harley-Davidson motorcycles equipped with 39mm front forks. These rings act as internal retaining components within the fork assembly, helping secure seals and internal components in proper position for smooth suspension operation.
Ideal for full fork rebuilds or bulk replacement needs, this set provides multiple units for servicing several forks or keeping extras on hand. These are commonly used during fork maintenance alongside seals, bushings, and retaining clips.
Manufactured for durability and proper fitment, these ring stoppers help ensure reliable fork performance and longevity.
Features:
Type: Fork ring stoppers / retaining rings
Fork Size: 39mm
Quantity: Set of 10
Used for securing fork seals and internal components
Durable construction for long-term use
Ideal for fork rebuilds or maintenance
Compatible with OEM-style fork assemblies
Fitment:
Harley-Davidson Models with 39mm Front Forks, including:
Sportster Models (1987-up)
Dyna Models (1991–2005)
FXR Models (1988–1994)
Note:
Designed for 39mm fork applications only. Always verify compatibility with your fork assembly before purchasing.
This 39mm lower fork slider bushing set (V-Twin 24-0181 / 28186) is a high-quality replacement designed for Harley-Davidson models equipped with 39mm front forks. These bushings are essential for maintaining proper fork alignment, reducing friction, and ensuring smooth suspension operation.
Manufactured to meet or exceed OEM specifications, this set is ideal for fork rebuilds, maintenance, or restoring ride quality. Proper lubrication during installation is recommended to extend service life and optimize performance.
Features:
Brand: V-Twin
V-Twin Part Number: 24-0181
Manufacturer Part Number: 28186
Replaces OEM: 45465-87
Fork Size: 39mm
Type: Lower fork slider bushings
Improves fork stability and smooth operation
Reduces wear and friction
Durable construction for long service life
Sold as a pair
Fitment:
Harley-Davidson Models with 39mm Forks:
Sportster XL Models: 1988–2026
FXR Models: 1988–1994
Dyna FXD Models: 1991–2005
Technical Notes:
Use assembly lube during installation
Recommended fork oil: 20 weight (average conditions)
Note:
Fits models equipped with 39mm forks only. Please verify fork size and compatibility before purchasing.
For sale is a Genuine OEM set of Harley-Davidson Fork Lowers for 2000–2001 Electra Glide models. These lower fork legs are original Harley parts, featuring correct casting marks and factory mounts.
📌 Fitment:
Fits 2000–2001 Harley-Davidson Electra Glide (FLHT / FLHTC / FLHTCU) models
OEM part numbers: 46497-00 and 4649-00 (casting code 2053A)
📌 Details:
Genuine Harley-Davidson Showa fork lowers
Designed for dual-disc front brake setup
Factory aluminum finish
Compatible with stock front suspension and wheel assemblies
📌 Condition:
Used condition. May show signs of light wear or surface marks from normal use. Structurally solid, with no cracks or stripped threads.
A set of 39mm fork dust seals designed for Harley-Davidson motorcycles equipped with 39mm front forks. Fits a wide range of 1987–2005 Evolution, Sportster, and Twin Cam models that use 39mm forks. These seals protect fork tubes from dirt, debris, and moisture, ensuring smooth suspension performance and longer fork life.
Condition:
New seals, ready for installation.
Fits Harley-Davidson Models (1987–2005 with 39mm forks):
Evolution models
Sportster models
Twin Cam models
(Confirm with your service manual or fork size before purchase.)
Pair of 39mm fork seals for Harley-Davidson motorcycles, built to keep fork oil inside and suspension performing properly. These fit a wide range of Harley models, including 1987 and newer Sportsters, Evolution Big Twins, and Twin Cam motorcycles.
📌 Condition: New
📌 Size: 39mm
📌 Fits: Sportster 1987+, Evolution Big Twin, Twin Cam
Features:
39mm fork oil seals for Harley-Davidson
Fits Sportster models from 1987 and up
Compatible with Evolution and Twin Cam models
Helps prevent oil leaks, extends fork life
Durable construction and reliable sealing
Genuine EMPI 98-0151-B crank pulley seal for Volkswagen Type 2 bus engines (1700–1800cc). Designed to provide a secure, leak-free seal on the crankshaft pulley, helping maintain proper oil pressure and extend engine life.
📌 Condition: New
📌 Brand: EMPI
📌 Part Number: 98-0151-B
Features:
Direct replacement crank pulley seal
Fits VW Type 2 bus engines, 1700–1800cc
Helps prevent oil leaks and maintain performance
Durable EMPI construction
NEW K&L Supply 15-5091 fork oil seals (NOK) in size 39×51×8/10 mm. Designed for superior sealing and durability, ensuring smooth suspension performance.
Condition: New
Brand: K&L Supply
Part Number: 15-5091
Size: 39×51×8/10 mm
Type: Fork Oil Seals
📌 Features:
OEM-quality NOK seals
Precision fit for reliable suspension function
Helps prevent oil leaks and contamination
Improves fork performance and lifespan
NEW K&L Supply 15-1414 fork seals in size 30×42×10.5 mm. High-quality aftermarket replacement seals built to OEM standards for lasting suspension performance.
Condition: New
Brand: K&L Supply
Part Number: 15-1414
Size: 30×42×10.5 mm
📌 Features:
Precision-manufactured for reliable sealing
Reduces fork oil leakage and improves ride quality
Direct replacement for worn or leaking seals
Trusted brand in motorcycle parts and suspension service
NOS Shindy Fork Seals – size 32x44x10.5 mm. Genuine high-quality fork seals for multiple vintage Kawasaki, Yamaha, and Suzuki motorcycles.
Condition: New Old Stock (NOS)
Brand: Shindy
Part Number: 32x44x10.5
Product Type: Fork Seals
📌 Compatibility:
Kawasaki KD175: 1976–1979
Suzuki GN125E: 1991–1996
Suzuki TS185 Sierra: 1979–1981
Yamaha DT125: 1979–1981
Yamaha SR250: 1980–1982
These seals are NOS and may show minor signs of age from storage, but they have never been installed. Perfect for restoring vintage bikes to OEM spec.
Please confirm fitment with your parts catalog before purchasing. Everything included is shown in photos.
OEM Harley-Davidson 39mm fork leg, part number 45919-87, compatible with 1999 & earlier FXR, Dyna, and Sportster models. This is a genuine Harley front fork leg (EPS23243) and is ideal as a replacement for a damaged or worn fork leg.
📌 Condition Notes:
OEM Harley-Davidson fork leg, #45919-87
Fits FXR, Dyna, and Sportster models 1999 & earlier
Used condition — may show wear, scratches, or blemishes (see photos)
Sold as pictured, hardware not included
Product Features:
Genuine Harley-Davidson 39mm fork leg
Durable OEM construction
Direct bolt-on replacement
Designed for pre-2000 Harley FXR, Dyna, and Sportster motorcycles
Condition: used, functional
Compatibility (verify before purchase):
Harley FXR (≤1999)
Harley Dyna (≤1999)
Harley Sportster (≤1999)
Confirm fitment with parts catalog before ordering
Genuine Harley-Davidson Upper & Lower Triple Tree Set (Part #3247) removed from a 2000 Electra Glide Ultra Classic FLHTCUI. This OEM triple tree set secures the fork tubes to the frame and maintains proper alignment and stability of the front end.
📌 Condition Note:
Used OEM parts
Structurally solid and functional
Shows normal cosmetic wear from age and use (see photos)
Price reflects used condition
Perfect OEM replacements if your triple tree set is bent, cracked, or missing during a rebuild or restoration.
Product Features:
Genuine Harley-Davidson OEM part
Part Number: 3247
Upper and lower triple tree clamp set
Removed from 2000 Electra Glide Ultra Classic FLHTCUI
Condition: used, see photos
Compatibility (verify with Harley manual before purchase):
2000 Harley-Davidson Electra Glide Ultra Classic FLHTCUI
May also fit additional Touring models from the same year with matching front-end configuration
