These Spectre Performance chrome show car dress-up bolt cap covers (part number 14085) are designed to cover exposed bolt heads for a cleaner custom appearance on motorcycles, hot rods, cars, trucks, and custom engine bays. The caps fit 1/2”, 12mm, and 13mm bolt heads and feature a triple chrome-plated finish for a polished show-quality look.
Ideal for engine dress-up projects, Harley-Davidson custom builds, show cars, transmission covers, primary covers, and general custom detailing applications.
Features:Brand: Spectre PerformancePart Number: 14085Type: Bolt cap cover kitChrome-plated finishFits 1/2”, 12mm, and 13mm bolt headsHelps conceal aged or exposed bolt headsEasy installation designCustom show-car appearance upgrade
Applications:
Compatible with many:Harley-Davidson motorcyclesCustom choppersHot rodsShow carsCustom engine baysTransmission and engine hardwareAutomotive and motorcycle dress-up applications
(Verify bolt head sizing before purchasing)
Notes:Bolt cap covers onlyFastening silicone/adhesive may be required depending on applicationVerify compatibility before ordering
This handlebar wire extension kit is designed for Harley-Davidson Dyna FXD Super Glide and FXDL Low Rider models from 1996-2006. The kit allows proper extension of factory handlebar wiring when installing taller ape hangers, custom handlebars, or modified control setups.
Ideal for custom Harley builds, handlebar upgrades, and clean internal wiring installations.
Features:Type: Handlebar wire extension kitDesigned for Harley-Davidson Dyna modelsAllows installation of taller handlebarsHelps extend factory control wiringIdeal for ape hanger and custom bar conversionsOEM-style connector compatibilitySimplifies custom handlebar installations
Fitment:
Harley-Davidson Dyna Models:
FXD Super Glide:1996–2006
FXDL Low Rider:1996–2006
May fit additional Harley-Davidson Dyna models with similar wiring systems.
(Verify exact handlebar and wiring compatibility before purchasing)
Notes:Wire extension kit onlyProfessional installation recommendedVerify wiring length requirements before ordering
This Bikers Choice chrome clutch and brake lever set is designed for Harley-Davidson XL Sportster models from 2004-2013. The set includes both front brake and clutch levers with an adjustable clutch lever design for improved rider comfort and lever positioning.
Featuring a polished chrome finish, these levers are ideal for replacing worn factory controls or upgrading the appearance of your Harley Sportster cockpit.
Features:Brand: Bikers ChoiceType: Clutch and brake lever setChrome-plated finishIncludes adjustable clutch leverOEM-style replacement fitmentImproves rider comfort and control feelCustom chrome appearance upgrade
Fitment:
Harley-Davidson XL Sportster Models:2004–2013
Compatible with many:XL883XL1200Sportster CustomSportster LowSportster NightsterSportster RoadsterIron 883
(Verify exact brake master cylinder and clutch perch compatibility before purchasing)
Notes:Includes clutch and brake lever setMounting hardware may not be included unless shown in photosVerify compatibility before ordering
This Drag Specialties air cleaner support bracket (part number DS-289062) is designed for Harley-Davidson XL Sportster models from 1988-2006. The bracket provides additional support for aftermarket or custom flat-backed air cleaner assemblies by mounting directly to the cylinder heads.
Designed to reduce carburetor vibration and help prevent intake leaks, this support bracket is commonly used with custom air cleaner setups and breather kits on Evolution Sportster models.
Features:Brand: Drag SpecialtiesPart Number: DS-289062Type: Air cleaner support bracketMounts to cylinder headsDesigned for aftermarket air cleaner supportCan be used with most breather kitsHelps reduce carb vibration and intake movementOEM-style installation design
Includes:• Air cleaner support bracket• Gaskets• Mounting hardware
Breather kits and breather bolts sold separately.
Fitment:
Harley-Davidson XL Sportster Models:1988–2006
Compatible with many:XL883XL1200Sportster CustomSportster HuggerSportster RoadsterSportster Low
(Verify air cleaner and breather compatibility before purchasing)
Notes:Designed for aftermarket/custom air cleaner applicationsProfessional installation recommendedVerify compatibility before ordering
This chrome transmission mounting plate is designed for Harley-Davidson Softail FXST and FLST models from 1986-1999. Built as an OEM-style replacement, this mounting plate secures the transmission assembly to the frame while adding a clean custom chrome appearance to the drivetrain area.
Ideal for restoration projects, custom Softail builds, or replacing worn or damaged transmission mounting hardware.
Features:Type: Transmission mounting plateChrome-plated finishOEM-style replacement fitmentDesigned for Softail transmission applicationsHeavy-duty metal constructionHelps securely mount transmission assemblyIdeal for custom and restoration projects
Fitment:
Harley-Davidson Softail Models:
FXST Softail Models:1986–1999
FLST Softail Models:1986–1999
Compatible with many:Heritage SoftailFat BoySoftail CustomSoftail StandardSpringer Softail models
(Verify exact transmission and frame compatibility before purchasing)
Notes:Transmission mounting plate onlyHardware may not be included unless shown in photosProfessional installation recommendedVerify compatibility before ordering
This Kuryakyn Airmaster Accent fairing trim kit (part number 8674) is designed for Harley-Davidson Touring models equipped with Batwing-style fairings and Airmaster body fairing accessories. Featuring a custom chrome appearance, this accent trim enhances the look of the fairing and touring cockpit area while complementing other Kuryakyn touring accessories.
Ideal for touring customization, appearance upgrades, or replacing damaged trim components on Harley-Davidson touring motorcycles and trikes.
Features:Brand: KuryakynPart Number: 8674Type: Airmaster Accent / fairing trim accessoryCustom chrome appearanceDesigned for Harley Touring fairingsOEM-style fitment and finishEnhances fairing styling and cockpit appearance
Fitment:
Harley-Davidson Touring Models
Road Glide Limited FLTRK:2020–2021
Road Glide Ultra FLTRU:2016–2019
Electra Glide Ultra Limited Low FLHTKL:2015–2019
Electra Glide Ultra Classic Low FLHTCUL:2014–2016
Electra Glide Ultra Limited FLHTK:2010–2021
Street Glide Trike FLHXXX:2010–2011
Tri Glide Ultra Classic FLHTCUTG:2009–2021
Electra Glide Ultra Classic EFI FLHTCUI:2009–2019
Harley-Davidson CVO Models
CVO Electra Glide Ultra Classic FLHTCUSE4:2009
CVO Electra Glide Ultra Classic FLHTCUSE5:2010
CVO Electra Glide Ultra Classic FLHTCUSE6:2011
CVO Electra Glide Ultra Classic FLHTCUSE7:2012
CVO Electra Glide Ultra Classic FLHTCUSE8:2013
Notes:Fairing accent trim accessory onlyMounting hardware may not be included unless shown in photosVerify compatibility before ordering
This 12 Volt Bulb RD35 P15D-30 12V 35/35W for Harley Davidson motorcycles V-Twin is a dual-filament 12V 35/35W headlight bulb designed for Harley-Davidson motorcycle applications using early metric-style headlamp assemblies. Featuring an RD35/P15D-30 style base, this bulb provides both high and low beam operation with reliable incandescent lighting performance.
Ideal for restoring factory headlight performance on vintage Harley-Davidson motorcycles, spring fork models, customs, choppers, and older V-Twin applications requiring a 2-pin style headlamp bulb.
Technical Specifications:Brand: V-Twin ManufacturingBulb Type: RD35 / P15D-30Voltage: 12VWattage: 35/35WType: Dual-filament headlight bulbBase Style: P15D-30 / 2-pin configurationHigh and low beam functionality
Features:OEM-style replacement bulbDual high/low beam operationDesigned for vintage Harley headlamp applicationsReliable incandescent lighting outputCompatible with many aftermarket and OEM-style headlight assemblies
Fitment:
Compatible with many vintage Harley-Davidson motorcycles and custom V-Twin applications using RD35 / P15D-30 headlight bulb configurations.
Common applications include:Spring fork Harley modelsVintage custom choppersEarly Harley-Davidson headlight assemblies
(Verify bulb base and socket compatibility before purchasing)
Notes:Bulb onlySold individually unless otherwise notedAvoid touching bulb glass during installationVerify fitment before ordering
This Eiko A3603 heavy duty headlight bulb 2-pack is designed for motorcycles, scooters, ATVs, snowmobiles, mopeds, and other powersports applications requiring a 12V 25/25W dual-filament bulb. These incandescent replacement bulbs are built for dependable lighting performance and vibration resistance in powersports environments.
The A3603 bulb is commonly cross referenced with Stanley A3603 and similar OEM-style headlight bulbs used in vintage Japanese motorcycles, scooters, and ATVs.
Technical Specifications:Brand: EikoPart Number: A3603 / A3603-BPVoltage: 12VWattage: 25/25WType: Dual-filament incandescent bulbBulb Shape: T6 clear glassBase Type: PX15d / P15d-style flange baseQuantity: 2-PackHeavy duty motorcycle/scooter application
Features:Dual high/low beam filament designHeavy duty construction for vibration resistanceOEM-style replacement fitmentSuitable for motorcycles, scooters, ATVs, and snowmobilesClear incandescent lighting outputIdeal for vintage powersports applications
Applications:
Commonly used in:MotorcyclesScootersATVsSnowmobilesMopedsVintage Japanese powersports vehicles
Compatible with many Honda, Yamaha, Suzuki, Kawasaki, Polaris, and similar applications using A3603-style bulbs.
(Verify bulb base and dimensions before purchasing)
Notes:Sold as 2-packAvoid touching bulb glass during installationVerify compatibility before ordering
This Eiko 6245J headlamp bulb is a 12V 45/45W incandescent replacement bulb designed for motorcycles, snowmobiles, ATVs, mopeds, scooters, and automotive applications. The bulb features a dual-filament design with a P15d-3 prefocus flange base and RP-10 clear glass construction.
Commonly cross referenced to Stanley A7028 and similar OEM-style headlight bulbs, this lamp is ideal for restoring factory lighting performance on vintage motorcycles and powersports machines.
Technical Specifications:Brand: EikoPart Number: 6245J / 6245J-BPCross Reference: A7028Voltage: 12VWattage: 45/45WBulb Type: RP-10 clear glassBase Type: P15d-3 prefocus flange baseDual filament designAverage rated life: Approx. 100 hours
Applications:
Commonly used in:MotorcyclesSnowmobilesATVsScootersMopedsVintage automotive headlight applications
Compatible with many Honda, Yamaha, Suzuki, Kawasaki, Polaris, and vintage powersports applications using 6245J/A7028-style bulbs.
(Verify bulb base and dimensions before purchasing)
Features:OEM-style replacement bulbDual high/low beam filamentBright halogen-style outputSuitable for powersports and vintage applicationsReliable incandescent construction
Notes:Bulb onlySold individually unless otherwise notedAvoid touching bulb glass during installationVerify fitment before ordering
This V-Twin Manufacturing original style weld-on frame mount kickstand and pin kit includes V-Twin part numbers 51-0515 and 27-1500 for Harley-Davidson Sportster applications. Designed as an OEM-style replacement for Harley part number 50090-53, this setup is intended for vintage Sportster frame repairs, restorations, or custom rigid/chopper builds.
The weld-on mount provides the correct original-style kickstand mounting point for 1952-1981 Sportster frames, while the included kickstand pin kit supports proper stand operation and retention.
Perfect for restoration projects, hardtail builds, or replacing damaged factory kickstand mounts.
Features:Brand: V-Twin ManufacturingV-Twin Part Numbers: 51-0515 & 27-1500Replaces OEM Harley Part: 50090-53Type: Weld-on kickstand mount and pin kitOriginal-style frame mount designHeavy-duty steel constructionOEM-style replacement fitmentIdeal for restoration and custom builds
Fitment:
Harley-Davidson Sportster Models:
Kickstand Mount:1952–1981
Kickstand Pin Kit:1952–1984
Compatible with many:Ironhead Sportster modelsXLH modelsXLCH modelsCustom rigid and chopper Sportster applications
(Verify exact frame and kickstand compatibility before purchasing)
Notes:Welding required for installationProfessional installation recommendedVerify fitment before ordering
This V-Twin Manufacturing chrome rear fender tip with decorative inlay is designed for 1980-1984 Harley-Davidson FL Touring models. Featuring classic Harley touring styling with a polished chrome finish, this rear fender tip enhances the rear fender appearance while maintaining a vintage OEM-style look.
Perfect for restoration projects, replacing damaged trim, or adding classic touring detail to vintage Harley-Davidson motorcycles.
Features:Brand: V-Twin ManufacturingType: Rear fender tip with inlayChrome-plated finishDecorative inlay stylingOEM-style touring appearanceIdeal for vintage Harley restorationsDurable metal construction
Fitment:
Harley-Davidson Models:
FL Touring Models:1980–1984
Compatible with many:Electra GlideTour GlideFL Touring applications
(Verify exact fender compatibility before purchasing)
Notes:Rear fender trim piece onlyHardware may not be included unless shown in photosVerify fitment before ordering
Up for sale is a brand new vintage NOS (New Old Stock) eGlideGoodies lockable sealed glove box doors kit (Model GD-1) for Harley-Davidson Touring motorcycles. This premium touring upgrade kit is uninstalled and comes complete in the original box with sealed hardware packs and original instructions.
Designed specifically for the lower vented leg fairing glove boxes found on vintage Harley-Davidson Touring models, this kit replaces the factory rubber snap-on covers with rigid weatherproof keyed hard doors for added convenience and security while touring.
Perfect for protecting wallets, phones, registration papers, and small valuables during long-distance rides.
Features:Brand: eGlideGoodiesModel: GD-1Type: Lockable glove box door kitRigid weatherproof hard door designKeyed locking security systemDirect replacement for factory rubber glove box coversIdeal for long-distance touring applications
Includes:• Two (2) lockable glove box door/frame assemblies• Factory sealed mounting hardware pack• Two (2) matching barrel keys• Original installation instruction guide• Original retail packaging
Fitment:
Harley-Davidson Touring Models:
Fits lower vented leg fairing glove box compartments on many vintage Harley-Davidson Touring motorcycles including applications such as:
Electra GlideUltra ClassicTour GlideRoad Glide fairing-equipped models
(Verify exact fairing and glove box compatibility before purchasing)
Condition:NOS (New Old Stock)
Unused vintage inventory in original packaging. Hardware packs remain factory sealed. Packaging may show shelf wear from long-term storage. Please review photos carefully for exact condition and contents.
Notes:Touring fairing glove box upgrade kitRare discontinued touring accessoryVerify fitment before ordering
This custom chrome Donnie Smith cable clamp is designed for Harley-Davidson, chopper, Big Dog, Ironhorse, and custom motorcycle applications. Featuring a polished chrome finish and custom billet styling, this clamp helps organize and secure control cables, brake lines, or wiring while adding a clean custom appearance to the motorcycle.
Perfect for custom builds, softail projects, pro street bikes, or show-quality chopper applications.
Features:Custom Donnie Smith style designChrome finishType: Cable clamp / line organizerHelps secure cables and wiringCustom billet-style appearanceIdeal for Harley and custom motorcyclesDurable metal construction
Fitment:
Universal custom motorcycle application
Compatible with many:Harley-Davidson modelsBig Dog motorcyclesAmerican IronHorse motorcyclesCustom choppersSoftail custom builds
(Verify mounting dimensions before purchasing)
Notes:Cable clamp onlyHardware may not be included unless shown in photosVerify fitment before ordering
This V-Twin Manufacturing chrome 8-inch shock spring cover (VT No: 54-0156) is designed for Harley-Davidson FL and FX models from 1973 to 1984. The cover cross references to Harley-Davidson OEM part number 54702-73 and is designed to fit over rear shock springs for a clean factory-style appearance.
Ideal for restoration projects, replacing damaged covers, or adding chrome detail to vintage Harley suspension components.
Features:Brand: V-Twin ManufacturingVT No: 54-0156Replaces OEM: 54702-73Type: Rear shock spring coverChrome-plated finish8-inch lengthOEM-style replacement fitmentEnhances rear suspension appearance
Fitment:
Harley-Davidson Models:
FL Models:1973–1984
FX Models:1973–1984
Notes:Shock spring cover onlySold individually unless otherwise notedVerify shock dimensions and compatibility before purchasing
This chrome triple hose separator is designed for Harley-Davidson, chopper, and custom motorcycle applications using 3/8” or 5/16” hoses. The separator helps organize and secure multiple fuel, oil, or breather lines while adding a clean custom appearance to the motorcycle.
Ideal for custom builds, braided line setups, or improving hose routing on Harley-Davidson motorcycles and choppers.
Features:Type: Triple hose separatorChrome finishFits 3/8” or 5/16” hosesHelps organize and secure hose routingCustom clean appearanceIdeal for Harley and chopper applicationsDurable metal construction
Fitment:
Universal motorcycle application
Compatible with many:Harley-Davidson modelsCustom choppersBobbersCustom oil and fuel line setups
(Verify hose size compatibility before purchasing)
Notes:Hose separator onlyHoses and hardware not included unless shown in photosVerify sizing before ordering
This Custom Chrome stainless steel battery hold down strap replacement is designed for Harley-Davidson XL Sportster and FXE models. Manufactured as an OEM-style replacement, this strap securely retains the motorcycle battery while adding durable corrosion-resistant stainless steel construction.
Ideal for restoration projects, replacing missing or damaged battery hardware, or maintaining vintage Harley models.
Features:Brand: Custom ChromeType: Battery hold down strapStainless steel constructionOEM-style replacement fitmentHelps securely retain batteryCorrosion-resistant finishIdeal for restoration and maintenance projects
Fitment:
Harley-Davidson Models:
XL Sportster Models:1982–1987
FXE Models:1973–1986
(Verify exact battery tray and application compatibility before purchasing)
Notes:Battery hold down strap onlyMounting hardware may not be included unless shown in photosVerify fitment before ordering
This 3-pack of Colony chrome plated acorn nuts (part number 6944-3) features a 3/8-16 UNC thread size and is designed for Harley-Davidson and custom motorcycle applications. These high-quality acorn nuts provide a clean finished appearance while helping protect exposed threads from dirt and corrosion.
Ideal for restoration projects, custom builds, or replacing worn hardware with durable chrome-plated components.
Features:Brand: ColonyPart Number: 6944-3Thread Size: 3/8-16 UNCQuantity: 3 acorn nutsChrome-plated finishProtects exposed threadsOEM-style hardware appearanceDurable steel construction
Fitment:
Universal motorcycle and Harley-Davidson applications using 3/8-16 UNC threaded hardware
(Verify thread size and application before purchasing)
Notes:Hardware onlyProfessional installation recommendedVerify compatibility before ordering
This Drag Specialties chrome spherical brake caliper insert (part number DS-325345) is designed for Harley-Davidson motorcycle applications. Featuring a smooth 1.4-inch spherical radius design, this insert enhances the appearance of factory-style brake calipers with a clean custom chrome finish.
The insert installs using special foam adhesive for a simple custom upgrade without major modification. Ideal for Harley custom builds, touring bikes, and show-quality detail work.
Features:Brand: Drag SpecialtiesPart Number: DS-325345Type: Brake caliper insertChrome spherical radius design1.4” styling profileEasy adhesive-backed installationCustom Harley appearance upgrade
Fitment:
Harley-Davidson Applications:Fits various Harley-Davidson brake caliper setups
Common custom and touring applications
(Verify exact caliper compatibility before purchasing)
Notes:Caliper insert onlySold individually unless otherwise notedVerify measurements and fitment before ordering
This Chrome Specialties chrome taillight visor (part number 340297) is designed for Harley-Davidson Panhead, Shovelhead, and Sportster models from 1955 to 1972. Featuring classic vintage Harley styling, this visor mounts over the taillight assembly to add a period-correct custom look while complementing chrome rear fender accessories.
Ideal for restorations, chopper projects, or vintage Harley custom builds.
Features:Brand: Chrome SpecialtiesPart Number: 340297Type: Chrome taillight visorVintage custom Harley stylingChrome-plated finishOEM-style custom appearanceIdeal for restoration or chopper applications
Fitment:
Harley-Davidson Models:
Panhead Models:1955–1965
Shovelhead Models:1966–1972
Sportster / Ironhead Models:1957–1972
(Verify exact taillight compatibility before purchasing)
Notes:Taillight visor accessory onlyHardware may not be included unless shown in photosVerify fitment before ordering
This pair of genuine Harley-Davidson OEM chrome lifter block / tappet guide covers is designed for Harley-Davidson Twin Cam engine applications. These covers mount over the tappet guide/lifter block area and provide the factory chrome appearance while protecting internal valvetrain components.
Ideal for replacing damaged covers, restoring OEM appearance, or completing a Twin Cam engine rebuild.
Features:Genuine Harley-Davidson OEM partsType: Lifter block / tappet guide coversChrome finishDesigned for Twin Cam enginesOEM Harley fit and finishHelps protect tappet guide assembliesGreat for restoration or replacement applications
Fitment:
Harley-Davidson Models:
Twin Cam engine applications
Commonly fits many:Touring modelsSoftail modelsDyna models
(Verify exact year and engine compatibility before purchasing)
Notes:Pair of tappet guide covers includedHardware and gaskets may not be included unless shown in photosVerify compatibility before ordering
This Paughco engine adapter plate (part number 741TC / 0933-0027) is designed for Harley-Davidson Twin Cam 88A engine applications. This adapter plate is commonly used in custom motorcycle builds and frame conversions where a Twin Cam engine is being installed into a compatible chassis setup.
Manufactured for strength and proper engine alignment, making it ideal for custom Harley projects, choppers, and drivetrain conversions.
Features:Brand: PaughcoPart Number: 741TCReference Number: 0933-0027Type: Engine adapter plateDesigned for Twin Cam 88A engine applicationsIdeal for custom builds and frame conversionsDurable heavy-duty construction
Fitment:
Harley-Davidson Applications:
Twin Cam 88A engine setups
Commonly used for:Custom Harley buildsChopper projectsFrame conversion applications
(Verify exact fitment and frame compatibility before purchasing)
Notes:Custom application componentProfessional installation recommendedHardware may not be included unless shown in photos
This Custom Chrome chrome-plated front axle and hardware kit (64064) is designed for Harley-Davidson Sportster, FX, and FXR models equipped with dual disc front brakes from 1977 to 1983. The kit provides OEM-style replacement front axle hardware with a clean chrome finish ideal for restoration or custom applications.
Perfect for replacing worn axle components or completing a vintage Harley front-end rebuild.
Features:Brand: Custom ChromePart Number: 64064Type: Front axle and hardware kitChrome-plated finishOEM-style replacement fitmentDesigned for dual disc front brake applicationsIdeal for restoration or custom builds
Fitment:
Harley-Davidson Models:
Sportster Models:1977–1983
FX Models:1977–1983
FXR Models:1977–1983
Fits models equipped with dual disc front brakes
Notes:Front axle and hardware kit onlyVerify exact fitment before purchasing
This 10-pack of Harley-Davidson lever anchor pins (part number 492473) is designed for Harley motorcycle clutch and brake lever control assemblies. These pins secure the lever mechanism within the hand control housing and are ideal for maintenance, repairs, or keeping spare shop hardware on hand.
Perfect for Harley-Davidson restoration projects, control rebuilds, or replacing worn or missing lever hardware.
Features:Part Number: 492473Quantity: 10 pinsType: Lever anchor pinsFits clutch and brake lever assembliesOEM-style replacement hardwareDurable metal constructionIdeal for maintenance and restoration
Fitment:
Harley-Davidson Applications:Fits various Harley-Davidson clutch and brake hand control assemblies
(Verify exact year and model compatibility before purchasing)
Notes:Hardware onlyProfessional installation recommendedVerify compatibility before ordering
This Kuryakyn ISO Throttle Boss (part number 6250) is a universal motorcycle throttle assist designed to reduce hand fatigue and improve rider comfort on long rides. It mounts to compatible ISO grips and allows riders to control the throttle using the palm of the hand instead of maintaining constant grip pressure.
Ideal for touring motorcycles, cruisers, and long-distance riding applications.
Features:Brand: KuryakynPart Number: 6250Type: Throttle assist / throttle bossDesigned for Kuryakyn ISO gripsHelps reduce wrist and hand fatigueImproves long-distance riding comfortEasy clamp-on installationChrome finish
Fitment:
Universal application for motorcycles equipped with compatible Kuryakyn ISO grips
Common Harley-Davidson touring and cruiser applications
(Verify compatibility before purchasing)
Notes:Throttle boss onlyISO grips not included unless shown in photosVerify fitment before ordering
